comdemo.doc

来自「C语言开发串行通讯程序库」· DOC 代码 · 共 43 行

        Comdemo - Serial Communications Demo.

        Comdemo is a full duplex terminal program. It recognizes most
        of the more common ANSI control sequence such as cursor
        location and screen attributes. You can use Comdemo to
        dial up a BBS or communicate with RS-232 equipment.

        Comdemo will send Ctrl characters and keys such as the
        escape key verbatim. Some Alt characters are reserved for
        commands. They are as follows:


         Alt A - Toggle between ANSI and TTY terminal.
         Alt B - Next baud rate.
         Alt C - Next COM port.
         Alt D - Hayes dial command (sends the string "ATDT")
         Alt E - Toggle echo mode.
         Alt G - Hayes hang up command (sends the string "~~~+++~~~ATH0\r\n").
         Alt H - Next handshake scheme.
         Alt I - Initialize a Hayes modem (sends the string "ATZ").
         Alt N - Append a line feed to a carriage return toggle.
         Alt M - Toggle mode (8-1-N, 7-1-E).
         Alt X - Quit Comdemo.
         Pg Up - Upload a file (Xmodem)
         Pg Dn - Download a file (Xmodem)


        To dial up a BBS, set the COM port (Alt C), baud rate (Alt B),
        word length (Alt W), number of stop bits (Alt S) and parity
        (Alt P). If the BBS send ANSI escape codes make sure ANSI is
        selected (Alt A). In some cases you will need to set LF on
        (Alt N) as well. Now you can initialize your modem and dial.
        Press Alt I to initialize the modem and then press Alt D followed
        by the phone number and the enter key. If the initialize and dial
        strings in Comdemo are not appropriate for your modem, you
        can enter them by hand.

        Comdemo will compile/link under Borland C/C++ and Microsoft C/C++.
        If you are using Microsoft C/C++, make sure you link in the
        graphics library.