main.c

单片机C语言程序设计实训100例--基于AVR+PROTEUS仿真

//-----------------------------------------------------------------
//  名称: LGM12864液晶显示程序
//-----------------------------------------------------------------
//  说明: 本例运行时,液晶屏上将以正常与反白方式显示两行文字.
// 
//-----------------------------------------------------------------
#include <avr/io.h>
#include <util/delay.h>
#define INT8U   unsigned char
#define INT16U  unsigned int

//12864LCD相关函数与变量
extern void LCD_Initialize();
extern void Display_A_WORD_String(INT8U P,INT8U L,INT8U C,INT8U *M);
extern INT8U Reverse_Display;
//待显示汉字点阵(在Zimo软件中取模时,设宋体小四号,纵向取模,字节倒序)
const INT8U WORD_Dot_Matrix[] = 
{
//液
0x10,0x61,0x06,0xE0,0x18,0x84,0xE4,0x1C,0x84,0x65,0xBE,0x24,0xA4,0x64,0x04,0x00,
0x04,0x04,0xFF,0x00,0x01,0x00,0xFF,0x41,0x21,0x12,0x0C,0x1B,0x61,0xC0,0x40,0x00,
//晶
0x00,0x00,0x00,0x00,0x7E,0x2A,0x2A,0x2A,0x2A,0x2A,0x2A,0x7E,0x00,0x00,0x00,0x00,
0x00,0x7F,0x25,0x25,0x25,0x25,0x7F,0x00,0x00,0x7F,0x25,0x25,0x25,0x25,0x7F,0x00,
//屏
0x00,0x00,0xFF,0x09,0x49,0x59,0xE9,0x49,0x49,0x49,0xE9,0x59,0x49,0x4F,0x00,0x00,
0x40,0x30,0x0F,0x82,0x42,0x32,0x0F,0x02,0x02,0x02,0xFF,0x02,0x02,0x02,0x02,0x00,
//测
0x08,0x31,0x86,0x60,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0x00,0xFF,0x00,
0x04,0xFC,0x03,0x00,0x80,0x47,0x30,0x0F,0x10,0x67,0x00,0x07,0x40,0x80,0x7F,0x00,
//试
0x40,0x42,0xDC,0x08,0x00,0x90,0x90,0x90,0x90,0x90,0xFF,0x10,0x12,0x1C,0x10,0x00,
0x00,0x00,0x7F,0x20,0x10,0x20,0x20,0x1F,0x10,0x10,0x01,0x06,0x18,0x20,0x78,0x00,
//程
0x10,0x12,0xD2,0xFE,0x91,0x11,0x80,0xBF,0xA1,0xA1,0xA1,0xA1,0xBF,0x80,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x44,0x44,0x44,0x7F,0x44,0x44,0x44,0x44,0x40,0x00,
//序
0x00,0x00,0xFC,0x04,0x04,0x14,0x14,0x35,0x56,0x94,0x54,0x34,0x14,0x04,0x04,0x00,
0x80,0x60,0x1F,0x00,0x01,0x01,0x01,0x41,0x81,0x7F,0x01,0x01,0x01,0x03,0x01,0x00
};

//-----------------------------------------------------------------
// 主程序
//-----------------------------------------------------------------
int main()
{






}