⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 logging.c

📁 大名鼎鼎的远程登录软件putty的Symbian版源码
💻 C
字号:
#include <stdio.h>#include <stdlib.h>#include <ctype.h>#include <time.h>#include <assert.h>#include "putty.h"/* log session to file stuff ... */struct LogContext {    FILE *lgfp;    Filename currlogfilename;    void *frontend;    Config cfg;};static void xlatlognam(Filename *d, Filename s, char *hostname, struct tm *tm);/* * Log session traffic. */void logtraffic(void *handle, unsigned char c, int logmode){    struct LogContext *ctx = (struct LogContext *)handle;    if (ctx->cfg.logtype > 0) {	if (ctx->cfg.logtype == logmode) {	    /* deferred open file from pgm start? */	    if (!ctx->lgfp)		logfopen(ctx);	    if (ctx->lgfp)		fputc(c, ctx->lgfp);	}    }}/* * Flush any open log file. */void logflush(void *handle) {    struct LogContext *ctx = (struct LogContext *)handle;    if (ctx->cfg.logtype > 0)	if (ctx->lgfp)	    fflush(ctx->lgfp);    /* [Petteri] Hack: */    if ( (ctx->cfg.logtype > 0) && ctx->lgfp ) {        fclose(ctx->lgfp);        ctx->lgfp = f_open(ctx->currlogfilename, "ab");    }}/* * Log an Event Log entry. Used in SSH packet logging mode; this is * also as convenient a place as any to put the output of Event Log * entries to stderr when a command-line tool is in verbose mode. * (In particular, this is a better place to put it than in the * front ends, because it only has to be done once for all * platforms. Platforms which don't have a meaningful stderr can * just avoid defining FLAG_STDERR. */void log_eventlog(void *handle, const char *event){    struct LogContext *ctx = (struct LogContext *)handle;    if ((statics()->flags & FLAG_STDERR) && (statics()->flags & FLAG_VERBOSE)) {	fprintf(stderr, "%s\n", event);	fflush(stderr);    }    if (ctx->cfg.logtype != LGTYP_PACKETS)	return;    if (!ctx->lgfp)	logfopen(ctx);    if (ctx->lgfp)	fprintf(ctx->lgfp, "Event Log: %s\r\n", event);}/* * Log an SSH packet. * If n_blanks != 0, blank or omit some parts. * Set of blanking areas must be in increasing order. */void log_packet(void *handle, int direction, int type,		char *texttype, void *data, int len,		int n_blanks, const struct logblank_t *blanks){    struct LogContext *ctx = (struct LogContext *)handle;    char dumpdata[80], smalldata[5];    if (ctx->cfg.logtype != LGTYP_PACKETS)	return;    if (!ctx->lgfp)	logfopen(ctx);    if (ctx->lgfp) {	int p = 0, b = 0, omitted = 0;	int output_pos = 0; /* NZ if pending output in dumpdata */	/* Packet header. */	fprintf(ctx->lgfp, "%s packet type %d / 0x%02x (%s)\r\n",		direction == PKT_INCOMING ? "Incoming" : "Outgoing",		type, type, texttype);	/*	 * Output a hex/ASCII dump of the packet body, blanking/omitting	 * parts as specified.	 */	while (p < len) {	    int blktype;	    /* Move to a current entry in the blanking array. */	    while ((b < n_blanks) &&		   (p >= blanks[b].offset + blanks[b].len))		b++;	    /* Work out what type of blanking to apply to	     * this byte. */	    blktype = PKTLOG_EMIT; /* default */	    if ((b < n_blanks) &&		(p >= blanks[b].offset) &&		(p < blanks[b].offset + blanks[b].len))		blktype = blanks[b].type;	    /* If we're about to stop omitting, it's time to say how	     * much we omitted. */	    if ((blktype != PKTLOG_OMIT) && omitted) {		fprintf(ctx->lgfp, "  (%d byte%s omitted)\r\n",			omitted, (omitted==1?"":"s"));		omitted = 0;	    }	    /* (Re-)initialise dumpdata as necessary	     * (start of row, or if we've just stopped omitting) */	    if (!output_pos && !omitted)		sprintf(dumpdata, "  %08x%*s\r\n", p-(p%16), 1+3*16+2+16, "");	    /* Deal with the current byte. */	    if (blktype == PKTLOG_OMIT) {		omitted++;	    } else {		int c;		if (blktype == PKTLOG_BLANK) {		    c = 'X';		    sprintf(smalldata, "XX");		} else {  /* PKTLOG_EMIT */		    c = ((unsigned char *)data)[p];		    sprintf(smalldata, "%02x", c);		}		dumpdata[10+2+3*(p%16)] = smalldata[0];		dumpdata[10+2+3*(p%16)+1] = smalldata[1];		dumpdata[10+1+3*16+2+(p%16)] = (isprint(c) ? c : '.');		output_pos = (p%16) + 1;	    }	    p++;	    /* Flush row if necessary */	    if (((p % 16) == 0) || (p == len) || omitted) {		if (output_pos) {		    strcpy(dumpdata + 10+1+3*16+2+output_pos, "\r\n");		    fputs(dumpdata, ctx->lgfp);		    output_pos = 0;		}	    }	}	/* Tidy up */	if (omitted)	    fprintf(ctx->lgfp, "  (%d byte%s omitted)\r\n",		    omitted, (omitted==1?"":"s"));	fflush(ctx->lgfp);    }}/* open log file append/overwrite mode */void logfopen(void *handle){    struct LogContext *ctx = (struct LogContext *)handle;    char buf[256];    time_t t;    struct tm tm;    char writemod[4];    /* Prevent repeat calls */    if (ctx->lgfp)	return;    if (!ctx->cfg.logtype)	return;    sprintf(writemod, "wb");	       /* default to rewrite */    time(&t);    tm = *localtime(&t);    /* substitute special codes in file name */    xlatlognam(&ctx->currlogfilename, ctx->cfg.logfilename,ctx->cfg.host, &tm);    ctx->lgfp = f_open(ctx->currlogfilename, "r");  /* file already present? */    if (ctx->lgfp) {	int i;	fclose(ctx->lgfp);	if (ctx->cfg.logxfovr != LGXF_ASK) {	    i = ((ctx->cfg.logxfovr == LGXF_OVR) ? 2 : 1);	} else	    i = askappend(ctx->frontend, ctx->currlogfilename);	if (i == 1)	    writemod[0] = 'a';	       /* set append mode */	else if (i == 0) {	       /* cancelled */	    ctx->lgfp = NULL;	    ctx->cfg.logtype = 0;	       /* disable logging */	    return;	}    }    ctx->lgfp = f_open(ctx->currlogfilename, writemod);    if (ctx->lgfp) {			       /* enter into event log */	/* --- write header line into log file */	fputs("=~=~=~=~=~=~=~=~=~=~=~= PuTTY log ", ctx->lgfp);	strftime(buf, 24, "%Y.%m.%d %H:%M:%S", &tm);	fputs(buf, ctx->lgfp);	fputs(" =~=~=~=~=~=~=~=~=~=~=~=\r\n", ctx->lgfp);	sprintf(buf, "%s session log (%s mode) to file: ",		(writemod[0] == 'a') ? "Appending" : "Writing new",		(ctx->cfg.logtype == LGTYP_ASCII ? "ASCII" :		 ctx->cfg.logtype == LGTYP_DEBUG ? "raw" :		 ctx->cfg.logtype == LGTYP_PACKETS ? "SSH packets" : "<ukwn>"));	/* Make sure we do not exceed the output buffer size */	strncat(buf, filename_to_str(&ctx->currlogfilename), 128);	buf[strlen(buf)] = '\0';	logevent(ctx->frontend, buf);    }}void logfclose(void *handle){    struct LogContext *ctx = (struct LogContext *)handle;    if (ctx->lgfp) {	fclose(ctx->lgfp);	ctx->lgfp = NULL;    }}void *log_init(void *frontend, Config *cfg){    struct LogContext *ctx = snew(struct LogContext);    ctx->lgfp = NULL;    ctx->frontend = frontend;    ctx->cfg = *cfg;		       /* STRUCTURE COPY */    return ctx;}void log_free(void *handle){    struct LogContext *ctx = (struct LogContext *)handle;    logfclose(ctx);    sfree(ctx);}void log_reconfig(void *handle, Config *cfg){    struct LogContext *ctx = (struct LogContext *)handle;    int reset_logging;    if (!filename_equal(ctx->cfg.logfilename, cfg->logfilename) ||	ctx->cfg.logtype != cfg->logtype)	reset_logging = TRUE;    else	reset_logging = FALSE;    if (reset_logging)	logfclose(ctx);    ctx->cfg = *cfg;		       /* STRUCTURE COPY */    if (reset_logging)	logfopen(ctx);}/* * translate format codes into time/date strings * and insert them into log file name * * "&Y":YYYY   "&m":MM   "&d":DD   "&T":hhmm   "&h":<hostname>   "&&":& */static void xlatlognam(Filename *dest, Filename src,		       char *hostname, struct tm *tm) {    char buf[10], *bufp;    int size;    char buffer[FILENAME_MAX];    int len = sizeof(buffer)-1;    char *d;    const char *s;    d = buffer;    s = filename_to_str(&src);    while (*s) {	/* Let (bufp, len) be the string to append. */	bufp = buf;		       /* don't usually override this */	if (*s == '&') {	    char c;	    s++;	    size = 0;	    if (*s) switch (c = *s++, tolower(c)) {	      case 'y':		size = strftime(buf, sizeof(buf), "%Y", tm);		break;	      case 'm':		size = strftime(buf, sizeof(buf), "%m", tm);		break;	      case 'd':		size = strftime(buf, sizeof(buf), "%d", tm);		break;	      case 't':		size = strftime(buf, sizeof(buf), "%H%M%S", tm);		break;	      case 'h':		bufp = hostname;		size = strlen(bufp);		break;	      default:		buf[0] = '&';		size = 1;		if (c != '&')		    buf[size++] = c;	    }	} else {	    buf[0] = *s++;	    size = 1;	}	if (size > len)	    size = len;	memcpy(d, bufp, size);	d += size;	len -= size;    }    *d = '\0';    *dest = filename_from_str(buffer);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -