lcdconf_8811_m1_m128x80.h

非常好的 uc gui 学习工具,适合于初学都。 VC 的仿真环境

/*
*********************************************************************************************************
*                                                uC/GUI
*                        Universal graphic software for embedded applications
*
*                       (c) Copyright 2002, Micrium Inc., Weston, FL
*                       (c) Copyright 2002, SEGGER Microcontroller Systeme GmbH
*
*              礐/GUI is protected by international copyright laws. Knowledge of the
*              source code may not be used to write a similar product. This file may
*              only be used in accordance with a license and should not be redistributed
*              in any way. We appreciate your understanding and fairness.
*
----------------------------------------------------------------------
File        : LCDConf_8811_M1_LDB4_M128x80.h
Purpose     : Sample configuration file
----------------------------------------------------------------------
*/

#ifndef LCDCONF_H
#define LCDCONF_H

/*********************************************************************
*
*                   General configuration of LCD
*
**********************************************************************
*/

#define LCD_CONTROLLER 8811

#define LCD_XSIZE      (128)   /* X-resolution of LCD, Logical coor. */
#define LCD_YSIZE       (80)   /* Y-resolution of LCD, Logical coor. */

#define LCD_BITSPERPIXEL (1)

/*********************************************************************
*
*                   Simple bus configuration
*
**********************************************************************
*/

#ifndef WIN32
  void LCD_X_Write00(char c);
  void LCD_X_Write01(char c);
  char LCD_X_Read00(void);
  char LCD_X_Read01(void);
  #define LCD_WRITE_A1(Byte) LCD_X_Write01(Byte)
  #define LCD_WRITE_A0(Byte) LCD_X_Write00(Byte)
  #define LCD_READ_A1(Byte)  Byte = LCD_X_Read01()
  #define LCD_READ_A0(Byte)  Byte = LCD_X_Read00()
  void LCD_X_Init(void);
  #define LCD_X_INIT() LCD_X_Init()
#endif

/*********************************************************************
*
*                   Initialisation macro
*
**********************************************************************
*/

#define LCD_INIT_CONTROLLER() \
  LCD_X_INIT(); \
  LCD_WRITE_A0(0xE2); /* Software Reset */ \
  LCD_WRITE_A0(0xAB); /* Internal Oscillator ON */ \
  LCD_WRITE_A0(0xE1); /* power save mode off */ \
  LCD_WRITE_A0(0x62); /* 4x multiplier */ \
  LCD_WRITE_A0(0x81); /* VOP first byte */ \
  LCD_WRITE_A0(0xD3); /* VOP 2nd byte */ \
  LCD_WRITE_A0(0x2B); /* Internal Charge Pump ON */ \
  LCD_WRITE_A0(0xAF); /* Display ON */ \
  LCD_WRITE_A0(0x1E); /* Frame Rate Frequency 50Hz */ \
  LCD_WRITE_A0(0xA1); /* X mirroring ON */ \
  LCD_WRITE_A0(0x40); /* set first diplay line */ \
  LCD_WRITE_A0(0x00); /* set initial display line */ \
  LCD_WRITE_A0(0x1A); /* p=automatically set */ \
  LCD_WRITE_A0(0xAF); /* Display ON */ \

#endif /* LCDCONF_H */