floatlib.c

来自「深圳市微逻辑电子有限公司 巨果&#8226 Kingmos&reg 系统核心」· C语言 代码 · 共 969 行 · 第 1/2 页

/*
** libgcc support for software floating point.
** Copyright (C) 1991 by Pipeline Associates, Inc.  All rights reserved.
** Permission is granted to do *anything* you want with this file,
** commercial or otherwise, provided this message remains intact.  So there!
** I would appreciate receiving any updates/patches/changes that anyone
** makes, and am willing to be the repository for said changes (am I
** making a big mistake?).

Warning! Only single-precision is actually implemented.  This file
won't really be much use until double-precision is supported.

However, once that is done, this file might eventually become a
replacement for libgcc1.c.  It might also make possible
cross-compilation for an IEEE target machine from a non-IEEE
host such as a VAX.

If you'd like to work on completing this, please talk to [e-mail].

--> Double precision floating support added by James Carlson on 20 April 1998.

**
** Pat Wood
** Pipeline Associates, Inc.
** pipeline![e-mail] or
** sun!pipeline!phw or
** uunet!motown!pipeline!phw
**
** 05/01/91 -- V1.0 -- first release to gcc mailing lists
** 05/04/91 -- V1.1 -- added float and double prototypes and return values
**                  -- fixed problems with adding and subtracting zero
**                  -- fixed rounding in truncdfsf2
**                  -- fixed SWAP define and tested on 386
*/

/*
** The following are routines that replace the libgcc soft floating point
** routines that are called automatically when -msoft-float is selected.
** The support single and double precision IEEE format, with provisions
** for byte-swapped machines (tested on 386).  Some of the double-precision
** routines work at full precision, but most of the hard ones simply punt
** and call the single precision routines, producing a loss of accuracy.
** long long support is not assumed or included.
** Overall accuracy is close to IEEE (actually 68882) for single-precision
** arithmetic.  I think there may still be a 1 in 1000 chance of a bit
** being rounded the wrong way during a multiply.  I'm not fussy enough to
** bother with it, but if anyone is, knock yourself out.
**
** Efficiency has only been addressed where it was obvious that something
** would make a big difference.  Anyone who wants to do this right for
** best speed should go in and rewrite in assembler.
**
** I have tested this only on a 68030 workstation and 386/ix integrated
** in with -msoft-float.
*/

/* the following deal with IEEE single-precision numbers */
typedef __int64    INT64;
typedef unsigned __int64  UINT64;
//#define INT64      __int64
//#define UINT64     __int64

#define EXCESS		126
#define SIGNBIT		0x80000000
#define HIDDEN		(1 << 23)
#define SIGN(fp)	((fp) & SIGNBIT)
#define EXP(fp)		(((fp) >> 23) & 0xFF)
#define MANT(fp)	(((fp) & 0x7FFFFF) | HIDDEN)
#define PACK(s,e,m)	((s) | ((e) << 23) | (m))

/* the following deal with IEEE double-precision numbers */
#define EXCESSD		1022
#define HIDDEND		(1 << 20)
#define EXPD(fp)	(((fp.l.upper) >> 20) & 0x7FF)
#define SIGND(fp)	((fp.l.upper) & SIGNBIT)
#define MANTD(fp)	(((((fp.l.upper) & 0xFFFFF) | HIDDEND) << 10) | \
				(fp.l.lower >> 22))
#define HIDDEND_LL	((INT64)1 << 52)
#define MANTD_LL(fp)	((fp.ll & (HIDDEND_LL-1)) | HIDDEND_LL)
#define PACKD_LL(s,e,m)	(((INT64)((s)+((e)<<20))<<32)|(m))

/* define SWAP for 386/960 reverse-byte-order brain-damaged CPUs */
union double_long {
    double d;
#ifdef SWAP
    struct {
      unsigned long lower;
      long upper;
    } l;
#else
    struct {
      long upper;
      unsigned long lower;
    } l;
#endif
    INT64 ll;
};

union float_long
  {
    float f;
    long l;
  };

 
#define __fixdfdi     __imp___dtoi
#define __adddf3      __imp___addd
#define __muldf3      __imp___muld
#define __extendsfdf2 __imp___stod
#define __subdf3      __imp___subd
#define __truncdfsf2  __imp___dtos

#define __divdf3      __imp___divd
#define __addsf3      __imp___adds
#define __divsf3      __imp___divs
#define __mulsf3      __imp___muls
#define __subsf3      __imp___subs

#define __floatsidf   __imp___itod
#define __floatsisf   __imp___itos
#define __floatusisf  __imp___utos

#define __gtdf2       __imp___gtd
#define __gedf2       __imp___ged
#define __ltdf2       __imp___ltd
#define __ledf2       __imp___led
//#define __eqdf2       __imp___led
#define __negsf2      __imp___negs
#define __negdf2      __imp___negd

/* add two floats */
float __addsf3 (float a1, float a2)
{
  register long mant1, mant2;
  register union float_long fl1, fl2;
  register int exp1, exp2;
  int sign = 0;

  fl1.f = a1;
  fl2.f = a2;

  /* check for zero args */
  if (!fl1.l) {
      fl1.f = fl2.f;
      goto test_done;
  }
  if (!fl2.l)
      goto test_done;

  exp1 = EXP (fl1.l);
  exp2 = EXP (fl2.l);

  if (exp1 > exp2 + 25)
      goto test_done;
  if (exp2 > exp1 + 25) {
      fl1.f = fl2.f;
      goto test_done;
  }

  /* do everything in excess precision so's we can round later */
  mant1 = MANT (fl1.l) << 6;
  mant2 = MANT (fl2.l) << 6;

  if (SIGN (fl1.l))
    mant1 = -mant1;
  if (SIGN (fl2.l))
    mant2 = -mant2;

  if (exp1 > exp2)
    {
      mant2 >>= exp1 - exp2;
    }
  else
    {
      mant1 >>= exp2 - exp1;
      exp1 = exp2;
    }
  mant1 += mant2;

  if (mant1 < 0)
    {
      mant1 = -mant1;
      sign = SIGNBIT;
    }
  else if (!mant1) {
      fl1.f = 0;
      goto test_done;
  }

  /* normalize up */
  while (!(mant1 & 0xE0000000))
    {
      mant1 <<= 1;
      exp1--;
    }

  /* normalize down? */
  if (mant1 & (1 << 30))
    {
      mant1 >>= 1;
      exp1++;
    }

  /* round to even */
  mant1 += (mant1 & 0x40) ? 0x20 : 0x1F;

  /* normalize down? */
  if (mant1 & (1 << 30))
    {
      mant1 >>= 1;
      exp1++;
    }

  /* lose extra precision */
  mant1 >>= 6;

  /* turn off hidden bit */
  mant1 &= ~HIDDEN;

  /* pack up and go home */
  fl1.l = PACK (sign, exp1, mant1);
test_done:
  return (fl1.f);
}

/* subtract two floats */
float __subsf3 (float a1, float a2)
{
  register union float_long fl1, fl2;

  fl1.f = a1;
  fl2.f = a2;

  /* check for zero args */
  if (!fl2.l)
    return (fl1.f);
  if (!fl1.l)
    return (-fl2.f);

  /* twiddle sign bit and add */
  fl2.l ^= SIGNBIT;
  return __addsf3 (a1, fl2.f);
}

/* compare two floats */
long __cmpsf2 (float a1, float a2)
{
  register union float_long fl1, fl2;

  fl1.f = a1;
  fl2.f = a2;

  if (SIGN (fl1.l) && SIGN (fl2.l))
    {
      fl1.l ^= SIGNBIT;
      fl2.l ^= SIGNBIT;
    }
  if (fl1.l < fl2.l)
    return (-1);
  if (fl1.l > fl2.l)
    return (1);
  return (0);
}

/* multiply two floats */
float __mulsf3 (float a1, float a2)
{
  register union float_long fl1, fl2;
  register unsigned long result;
  register int exp;
  int sign;

  fl1.f = a1;
  fl2.f = a2;

  if (!fl1.l || !fl2.l) {
      fl1.f = 0;
      goto test_done;
  }

  /* compute sign and exponent */
  sign = SIGN (fl1.l) ^ SIGN (fl2.l);
  exp = EXP (fl1.l) - EXCESS;
  exp += EXP (fl2.l);

  fl1.l = MANT (fl1.l);
  fl2.l = MANT (fl2.l);

  /* the multiply is done as one 16x16 multiply and two 16x8 multiples */
  result = (fl1.l >> 8) * (fl2.l >> 8);
  result += ((fl1.l & 0xFF) * (fl2.l >> 8)) >> 8;
  result += ((fl2.l & 0xFF) * (fl1.l >> 8)) >> 8;

  result >>= 2;
  if (result & 0x20000000)
    {
      /* round */
      result += 0x20;
      result >>= 6;
    }
  else
    {
      /* round */
      result += 0x10;
      result >>= 5;
      exp--;
    }
  if (result & (HIDDEN<<1)) {
    result >>= 1;
    exp++;
  }

  result &= ~HIDDEN;

  /* pack up and go home */
  fl1.l = PACK (sign, exp, result);
test_done:
  return (fl1.f);
}

/* divide two floats */
float __divsf3 (float a1, float a2)
{
  register union float_long fl1, fl2;
  register int result;
  register int mask;
  register int exp, sign;

  fl1.f = a1;
  fl2.f = a2;

  /* subtract exponents */
  exp = EXP (fl1.l) - EXP (fl2.l) + EXCESS;

  /* compute sign */
  sign = SIGN (fl1.l) ^ SIGN (fl2.l);

  /* divide by zero??? */
  if (!fl2.l)
    /* return NaN or -NaN */
    return (sign ? 0xFFFFFFFF : 0x7FFFFFFF);

  /* numerator zero??? */
  if (!fl1.l)
    return (0);

  /* now get mantissas */
  fl1.l = MANT (fl1.l);
  fl2.l = MANT (fl2.l);

  /* this assures we have 25 bits of precision in the end */
  if (fl1.l < fl2.l)
    {
      fl1.l <<= 1;
      exp--;
    }

  /* now we perform repeated subtraction of fl2.l from fl1.l */
  mask = 0x1000000;
  result = 0;
  while (mask)
    {
      if (fl1.l >= fl2.l)
	{
	  result |= mask;
	  fl1.l -= fl2.l;
	}
      fl1.l <<= 1;
      mask >>= 1;
    }

  /* round */
  result += 1;

  /* normalize down */
  exp++;
  result >>= 1;

  result &= ~HIDDEN;

  /* pack up and go home */
  fl1.l = PACK (sign, exp, result);
  return (fl1.f);
}

/* convert int to double */
double __floatsidf (register long a1)
{
  register int sign = 0, exp = 31 + EXCESSD;
  union double_long dl;

  if (!a1)
    {
      dl.l.upper = dl.l.lower = 0;
      return (dl.d);
    }

  if (a1 < 0)
    {
      sign = SIGNBIT;
      a1 = -a1;
    }

  while (a1 < 0x1000000)
    {
      a1 <<= 4;
      exp -= 4;
    }

  while (a1 < 0x40000000)
    {
      a1 <<= 1;
      exp--;
    }

  /* pack up and go home */
  dl.l.upper = sign;
  dl.l.upper |= exp << 20;
  dl.l.upper |= (a1 >> 10) & ~HIDDEND;
  dl.l.lower = a1 << 22;

  return (dl.d);
}
/* convert int64 to double */
double __floatdidf (register INT64 a1)
{
    register int exp = 63 + EXCESSD;
    union double_long dl;

    dl.l.upper = dl.l.lower = 0;
    if (a1 == 0)
	return (dl.d);

    if (a1 < 0) {
	dl.l.upper = SIGNBIT;
	a1 = -a1;
    }

    while (a1 < (INT64)1<<54) {
	a1 <<= 8;
	exp -= 8;
    }
    while (a1 < (INT64)1<<62) {
	a1 <<= 1;
	exp -= 1;
    }

  /* pack up and go home */
    dl.ll |= (a1 >> 10) & ~HIDDEND_LL;
    dl.l.upper |= exp << 20;

    return (dl.d);
}

/* convert long to float */
float __floatsisf (register long a1)
{
	// lilin change , has a warn-2001.12.29-begin
    //(float)__floatsidf(a1);  //origin
	return (float)__floatsidf(a1);
	// lilin change , has a warn-2001.12.29-end
}

/* convert unsigned long to float */
float __floatusisf (register unsigned long a1)
{
    // lilin change , has a warn-2001.12.29-begin
	//(float)__floatdidf(a1);
	return (float)__floatdidf(a1);
	// lilin change , has a warn-2001.12.29-end
}

/* convert int64 to float */
float __floatdisf (register INT64 a1)
{
    // lilin change , has a warn-2001.12.29-begin
	//(float)__floatdidf(a1);
	return (float)__floatdidf(a1);
	// lilin change , has a warn-2001.12.29-end
}

/* negate a float */
float __negsf2 (float a1)
{
  register union float_long fl1;