fbtcmain.h

针对ti c6713 dsk的flashburn烧写程序

/*******************************************************************************
 * Copyright 2004-2005 - Software Design Solutions, Inc.  All rights reserved.
 *
 * Portions of this work have been provided under license with Texas 
 * Instruments Inc.
 * 
 * $RCSfile: FBTCMain.h,v $
 * $Revision: 1.8 $
 * 
 * FlashBurn Target Component main routine, implementing the host/target 
 * interface
 ******************************************************************************/

#ifndef _FBTCMAIN_H
#define _FBTCMAIN_H

#include "type.h"
#include "TargetConfig.h"


/**
 * Comm. Protocol Version in force when this FBTC was created. 
 * Increment if the protocol changes, even if this software did not change.
 * For Protocol Version ID, see the Exchange Communications Protocol document.
 * v1 - original version
 * v2 - added the Query Edit Flash Permission command
 *      and expanded msg data buffer to 768 8-bit bytes.
 * v3 - added the Query Max Data Buffer Bytes command.
 *      and revised the comm. scheme to eliminate RTDX.
 * v4 - SDS Inc. product release.  Added FBTC_GET_ERASE_ESTIMATE and
 *      FBTC_GET_FLASH_ADDRS.
 *      C55x now gets and sets base address as words, not bytes
 */
#define COMMPROTOCOLVERSION  0x4


/**
 * Indexes to and sizes of various parts of a command in this version of the 
 * protocol
 */
/* Size of the command */
#define CMDSIZEBYTES       2                 
/* Size of arguments */
#define ARGSIZEBYTES      30                 
/* Index of command */
#define CMDINDEX           0                 
/* Index of the first argument - cmd takes 2 bytes */
#define ARGINDEX           (2 / BYTESPERMAU) 
/* Index of the first data item */
#define DATAINDEX          (ARGINDEX + ARGSIZEBYTES / BYTESPERMAU) 


/**
 * Predefined Status Codes for returning to Host processor.
 */
#define CMDOK              0x0
#define UNEXP_DATA_LENGTH  0x1
#define ILL_DATA_VAL       0x2       
#define CMD_NOT_DONE       0x3


/** 
 * FlashBurn command IDs
 */
typedef enum
{
    FBTC_NOP                      = 0x0000,
    FBTC_GET_PROTOCOL_VERSION     = 0x0001,
    FBTC_GET_STATUS               = 0x0002,
    FBTC_ERASE                    = 0x0003,
    FBTC_GET_BASE_ADDR            = 0x0004,
    FBTC_READ                     = 0x0005,
    FBTC_READ_BLOCK               = 0x0006,
    FBTC_WRITE_BEGIN              = 0x0007,
    FBTC_WRITE_CONTINUE           = 0x0008,
    FBTC_GET_CHECKSUM             = 0x0009,
    FBTC_USER_DATA                = 0x000a,
    FBTC_GET_FLASHSIZE            = 0x000b,
    FBTC_SET_BASE_ADDR            = 0x000c,
    FBTC_SET_FLASHSIZE            = 0x000d,
    FBTC_GET_FBTC_VERSION         = 0x000e,
    FBTC_GET_FLASH_EDIT_PERM      = 0x000f,
    FBTC_GET_MAX_BLOCKSIZE        = 0x0010,
    FBTC_GET_ERASE_ESTIMATE       = 0x0011,
    FBTC_GET_FLASH_ADDRS          = 0x0012
} FBTC_COMMAND_TYPE;

/** 
 * External declaration for the global message buffer
 */
extern MSG_DATA_TYPE theMessage[];

/**
 * Commands for setting and getting portions of a message
 */

/**
 * Store a command ID into the command buffer
 * 
 * @param [in] cmd - Command ID to store
 *
 * @post - The command ID is stored in the buffer
 */
void SetCmd(u16 cmd);


/**
 * Get a command ID from the command buffer
 *
 * @return - The command ID from the command buffer
 */
u16 GetCmd(void);


/**
 * Set an argument in the command buffer
 *
 * @param [in] index - Argument index, 0..15
 * @param [in] val   - Value for the argument
 *
 * @post - Command buffer contains the given argument
 */
void SetArg(int index, u16 val);


/**
 * Get an argument value from the command buffer
 *
 * @param [in] index - Index of the argument value to retrieve, 0..15
 * 
 * @return - The argument value
 */
u16 GetArg(int index);


/**
 * Get a pointer to the entire command message buffer
 *
 * @return - Pointer to the command message buffer
 */
MSG_DATA_TYPE *GetMessagePtr(void);


/**
 * Get a pointer to the data portion of the message
 *
 * @return - Pointer to the data portion of the command message buffer
 */
MSG_DATA_TYPE *GetDataPtr(void);


/**
 * Get the data item at the given index within the data
 *
 * @param [in] index - Zero based index within the data portion of the command
 * 
 * @return - Data at the given index
 */
MSG_DATA_TYPE GetData(int index);


/**
 * Set the data item at the given index within the data
 *
 * @param [in] index - Zero based index within the data portion of the command
 * @param [in] val   - Value for the data to set
 * 
 * @post - Data at the given index is set
 */
void SetData(int index, MSG_DATA_TYPE val);


/**
 * Create a U32 value from two U16 values
 *
 * @param [in] hi    - U16 value for MSB
 * @param [in] lo    - U16 value for LSB
 *
 * @return The 32 bit value
 */
u32 U16toU32(u16 lo, u16 hi);


#endif   /* FBTCMAIN_H */