audiospeaker.map

STM32F103 USB例子程序包括大容量存储、USB转串口

ARM Linker, RVCT3.1 [Build 914] for uVision [Standard]

================================================================================

Section Cross References

    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_DeInit) for RCC_DeInit
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_HSEConfig) for RCC_HSEConfig
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_WaitForHSEStartUp) for RCC_WaitForHSEStartUp
    hw_config.o(i.Set_System) refers to stm32f10x_flash.o(i.FLASH_PrefetchBufferCmd) for FLASH_PrefetchBufferCmd
    hw_config.o(i.Set_System) refers to stm32f10x_flash.o(i.FLASH_SetLatency) for FLASH_SetLatency
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_HCLKConfig) for RCC_HCLKConfig
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_PCLK2Config) for RCC_PCLK2Config
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_PCLK1Config) for RCC_PCLK1Config
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_PLLConfig) for RCC_PLLConfig
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_PLLCmd) for RCC_PLLCmd
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_GetFlagStatus) for RCC_GetFlagStatus
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_SYSCLKConfig) for RCC_SYSCLKConfig
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_GetSYSCLKSource) for RCC_GetSYSCLKSource
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_APB2PeriphClockCmd) for RCC_APB2PeriphClockCmd
    hw_config.o(i.Set_System) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphClockCmd) for RCC_APB1PeriphClockCmd
    hw_config.o(i.Set_System) refers to stm32f10x_gpio.o(i.GPIO_Init) for GPIO_Init
    hw_config.o(i.Set_System) refers to hw_config.o(.data) for .data
    hw_config.o(i.Set_USBClock) refers to stm32f10x_rcc.o(i.RCC_USBCLKConfig) for RCC_USBCLKConfig
    hw_config.o(i.Set_USBClock) refers to stm32f10x_rcc.o(i.RCC_APB1PeriphClockCmd) for RCC_APB1PeriphClockCmd
    hw_config.o(i.USB_Interrupts_Config) refers to stm32f10x_nvic.o(i.NVIC_SetVectorTable) for NVIC_SetVectorTable
    hw_config.o(i.USB_Interrupts_Config) refers to stm32f10x_nvic.o(i.NVIC_PriorityGroupConfig) for NVIC_PriorityGroupConfig
    hw_config.o(i.USB_Interrupts_Config) refers to stm32f10x_nvic.o(i.NVIC_Init) for NVIC_Init
    hw_config.o(i.USB_Cable_Config) refers to stm32f10x_gpio.o(i.GPIO_ResetBits) for GPIO_ResetBits
    hw_config.o(i.USB_Cable_Config) refers to stm32f10x_gpio.o(i.GPIO_SetBits) for GPIO_SetBits
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_gpio.o(i.GPIO_Init) for GPIO_Init
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_TimeBaseInit) for TIM_TimeBaseInit
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_OCInit) for TIM_OCInit
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_OC3PreloadConfig) for TIM_OC3PreloadConfig
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_OC1PreloadConfig) for TIM_OC1PreloadConfig
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_Cmd) for TIM_Cmd
    hw_config.o(i.Speaker_Timer_Config) refers to stm32f10x_tim.o(i.TIM_ITConfig) for TIM_ITConfig
    main.o(i.main) refers to hw_config.o(i.Set_System) for Set_System
    main.o(i.main) refers to hw_config.o(i.Set_USBClock) for Set_USBClock
    main.o(i.main) refers to hw_config.o(i.USB_Interrupts_Config) for USB_Interrupts_Config
    main.o(i.main) refers to usb_init.o(i.USB_Init) for USB_Init
    stm32f10x_it.o(i.USB_HP_CAN_TX_IRQHandler) refers to usb_int.o(i.CTR_HP) for CTR_HP
    stm32f10x_it.o(i.USB_LP_CAN_RX0_IRQHandler) refers to usb_istr.o(i.USB_Istr) for USB_Istr
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to stm32f10x_tim.o(i.TIM_GetITStatus) for TIM_GetITStatus
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to stm32f10x_tim.o(i.TIM_ClearITPendingBit) for TIM_ClearITPendingBit
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to stm32f10x_tim.o(i.TIM_SetCompare3) for TIM_SetCompare3
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to stm32f10x_it.o(.data) for .data
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to usb_endp.o(.data) for In_Data_Offset
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to usb_prop.o(.data) for MUTE_DATA
    stm32f10x_it.o(i.TIM2_IRQHandler) refers to usb_endp.o(.bss) for Stream_Buff
    usb_istr.o(i.SOF_Callback) refers to usb_endp.o(.data) for In_Data_Offset
    usb_istr.o(i.SOF_Callback) refers to stm32f10x_it.o(.data) for Out_Data_Offset
    usb_istr.o(i.USB_Istr) refers to usb_istr.o(i.SOF_Callback) for SOF_Callback
    usb_istr.o(i.USB_Istr) refers to usb_int.o(i.CTR_LP) for CTR_LP
    usb_istr.o(i.USB_Istr) refers to usb_istr.o(.data) for .data
    usb_istr.o(i.USB_Istr) refers to usb_init.o(.data) for wInterrupt_Mask
    usb_istr.o(i.USB_Istr) refers to usb_prop.o(.data) for Device_Property
    usb_istr.o(.data) refers to usb_core.o(i.NOP_Process) for NOP_Process
    usb_istr.o(.data) refers to usb_endp.o(i.EP1_OUT_Callback) for EP1_OUT_Callback
    usb_istr.o(.data) refers to usb_core.o(i.NOP_Process) for NOP_Process
    usb_prop.o(i.Speaker_init) refers to usb_pwr.o(i.PowerOn) for PowerOn
    usb_prop.o(i.Speaker_init) refers to usb_core.o(i.NOP_Process) for NOP_Process
    usb_prop.o(i.Speaker_init) refers to usb_init.o(.data) for pInformation
    usb_prop.o(i.Speaker_init) refers to usb_init.o(.data) for wInterrupt_Mask
    usb_prop.o(i.Speaker_init) refers to usb_desc.o(.constdata) for Speaker_ConfigDescriptor
    usb_prop.o(i.Speaker_init) refers to usb_pwr.o(.data) for bDeviceState
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetBTABLE) for SetBTABLE
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPType) for SetEPType
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPTxStatus) for SetEPTxStatus
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPRxAddr) for SetEPRxAddr
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPRxCount) for SetEPRxCount
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPTxAddr) for SetEPTxAddr
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.Clear_Status_Out) for Clear_Status_Out
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPRxValid) for SetEPRxValid
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPDblBuffAddr) for SetEPDblBuffAddr
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPDblBuffCount) for SetEPDblBuffCount
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.ClearDTOG_RX) for ClearDTOG_RX
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.ClearDTOG_TX) for ClearDTOG_TX
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.ToggleDTOG_TX) for ToggleDTOG_TX
    usb_prop.o(i.Speaker_Reset) refers to usb_regs.o(i.SetEPRxStatus) for SetEPRxStatus
    usb_prop.o(i.Speaker_Reset) refers to usb_core.o(i.SetDeviceAddress) for SetDeviceAddress
    usb_prop.o(i.Speaker_Reset) refers to hw_config.o(i.Speaker_Timer_Config) for Speaker_Timer_Config
    usb_prop.o(i.Speaker_Reset) refers to usb_init.o(.data) for pInformation
    usb_prop.o(i.Speaker_Reset) refers to usb_prop.o(.data) for .data
    usb_prop.o(i.Speaker_Reset) refers to usb_endp.o(.data) for In_Data_Offset
    usb_prop.o(i.Speaker_Reset) refers to stm32f10x_it.o(.data) for Out_Data_Offset
    usb_prop.o(i.Mute_Command) refers to usb_init.o(.data) for pInformation
    usb_prop.o(i.Mute_Command) refers to usb_prop.o(.data) for .data
    usb_prop.o(i.Speaker_Data_Setup) refers to usb_prop.o(i.Mute_Command) for Mute_Command
    usb_prop.o(i.Speaker_Data_Setup) refers to usb_init.o(.data) for pInformation
    usb_prop.o(i.Speaker_GetDeviceDescriptor) refers to usb_core.o(i.Standard_GetDescriptorData) for Standard_GetDescriptorData
    usb_prop.o(i.Speaker_GetDeviceDescriptor) refers to usb_prop.o(.data) for .data
    usb_prop.o(i.Speaker_GetConfigDescriptor) refers to usb_core.o(i.Standard_GetDescriptorData) for Standard_GetDescriptorData
    usb_prop.o(i.Speaker_GetConfigDescriptor) refers to usb_prop.o(.data) for .data
    usb_prop.o(i.Speaker_GetStringDescriptor) refers to usb_core.o(i.Standard_GetDescriptorData) for Standard_GetDescriptorData
    usb_prop.o(i.Speaker_GetStringDescriptor) refers to usb_init.o(.data) for pInformation
    usb_prop.o(i.Speaker_GetStringDescriptor) refers to usb_prop.o(.data) for .data
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_DeviceDescriptor
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_ConfigDescriptor
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_init) for Speaker_init
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_Reset) for Speaker_Reset
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_Status_In) for Speaker_Status_In
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_Status_Out) for Speaker_Status_Out
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_Data_Setup) for Speaker_Data_Setup
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_NoData_Setup) for Speaker_NoData_Setup
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_Get_Interface_Setting) for Speaker_Get_Interface_Setting
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_GetDeviceDescriptor) for Speaker_GetDeviceDescriptor
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_GetConfigDescriptor) for Speaker_GetConfigDescriptor
    usb_prop.o(.data) refers to usb_prop.o(i.Speaker_GetStringDescriptor) for Speaker_GetStringDescriptor
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_StringLangID
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_StringVendor
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_StringProduct
    usb_prop.o(.data) refers to usb_desc.o(.constdata) for Speaker_StringSerial
    usb_prop.o(.data) refers to usb_core.o(i.NOP_Process) for NOP_Process
    usb_pwr.o(i.PowerOn) refers to hw_config.o(i.USB_Cable_Config) for USB_Cable_Config
    usb_pwr.o(i.PowerOn) refers to usb_init.o(.data) for wInterrupt_Mask
    usb_pwr.o(i.PowerOff) refers to hw_config.o(i.USB_Cable_Config) for USB_Cable_Config
    usb_pwr.o(i.Suspend) refers to hw_config.o(i.Enter_LowPowerMode) for Enter_LowPowerMode
    usb_pwr.o(i.Resume_Init) refers to hw_config.o(i.Leave_LowPowerMode) for Leave_LowPowerMode
    usb_pwr.o(i.Resume) refers to usb_pwr.o(i.Resume_Init) for Resume_Init
    usb_pwr.o(i.Resume) refers to usb_pwr.o(.data) for .data
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_regs.o(i.GetENDPOINT) for GetENDPOINT
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_regs.o(i.GetEPDblBuf0Count) for GetEPDblBuf0Count
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_regs.o(i.GetEPDblBuf1Count) for GetEPDblBuf1Count
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_mem.o(i.PMAToUserBufferCopy) for PMAToUserBufferCopy
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_regs.o(i.FreeUserBuffer) for FreeUserBuffer
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_endp.o(.bss) for .bss
    usb_endp.o(i.EP1_OUT_Callback) refers to usb_endp.o(.data) for .data
    usb_core.o(i.Standard_GetConfiguration) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_SetConfiguration) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_SetConfiguration) refers to usb_prop.o(.data) for Device_Table
    usb_core.o(i.Standard_GetInterface) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_SetInterface) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_GetStatus) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_GetStatus) refers to usb_core.o(.data) for .data
    usb_core.o(i.Standard_ClearFeature) refers to usb_regs.o(i.ClearDTOG_TX) for ClearDTOG_TX
    usb_core.o(i.Standard_ClearFeature) refers to usb_regs.o(i.SetEPTxStatus) for SetEPTxStatus
    usb_core.o(i.Standard_ClearFeature) refers to usb_regs.o(i.SetEPRxCount) for SetEPRxCount
    usb_core.o(i.Standard_ClearFeature) refers to usb_regs.o(i.ClearDTOG_RX) for ClearDTOG_RX
    usb_core.o(i.Standard_ClearFeature) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_ClearFeature) refers to usb_prop.o(.data) for Device_Table
    usb_core.o(i.Standard_ClearFeature) refers to usb_prop.o(.data) for Device_Property
    usb_core.o(i.Standard_SetEndPointFeature) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_SetEndPointFeature) refers to usb_prop.o(.data) for Device_Table
    usb_core.o(i.Standard_SetDeviceFeature) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.Standard_GetDescriptorData) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.DataStageIn) refers to usb_regs.o(i.GetEPTxAddr) for GetEPTxAddr
    usb_core.o(i.DataStageIn) refers to usb_mem.o(i.UserToPMABufferCopy) for UserToPMABufferCopy
    usb_core.o(i.DataStageIn) refers to usb_regs.o(i.SetEPTxCount) for SetEPTxCount
    usb_core.o(i.DataStageIn) refers to usb_init.o(.data) for pInformation
    usb_core.o(i.DataStageIn) refers to usb_int.o(.data) for SaveTState
    usb_core.o(i.NoData_Setup0) refers to usb_core.o(i.Standard_SetConfiguration) for Standard_SetConfiguration