step motor_opt.bak

这是一个简单的步进电机的程序,用C51编写,主要可以定时控制电机进行180度的旋转

### uVision2 Project, (C) Keil Software
### Do not modify !

 cExt (*.c)
 aExt (*.s*; *.src; *.a*)
 oExt (*.obj)
 lExt (*.lib)
 tExt (*.txt; *.h; *.inc)
 pExt (*.plm)
 CppX (*.cpp)
 DaveTm { 0,0,0,0,0,0,0,0 }

Target (Target 1), 0x0000 // Tools: 'MCS-51'
GRPOPT 1,(Source Group 1),1,0,0

OPTFFF 1,1,1,3,0,4,18,0,<.\display.c><display.c> { 44,0,0,0,2,0,0,0,3,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,0,0,0,0,0,0,0,0,186,2,0,0,28,1,0,0 }
OPTFFF 1,2,1,0,0,150,150,0,<.\main.c><main.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,31,0,0,0,37,0,0,0,199,2,0,0,47,1,0,0 }
OPTFFF 1,3,1,0,0,1,1,0,<.\run.c><run.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,66,0,0,0,66,0,0,0,190,2,0,0,202,1,0,0 }
OPTFFF 1,4,1,234881024,0,80,80,0,<.\set time.c><set time.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,44,0,0,0,44,0,0,0,98,3,0,0,180,1,0,0 }
OPTFFF 1,5,1,251658240,0,1,7,0,<.\step motor.c><step motor.c> { 44,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255,255,255,255,255,252,255,255,255,233,255,255,255,110,0,0,0,110,0,0,0,22,3,0,0,131,1,0,0 }


TARGOPT 1, (Target 1)
 CLK51=11059200
  OPTTT 1,1,1,0
  OPTHX 0,65535,0,0,0
  OPTLX 120,65,8,<.\>
  OPTOX 16
  OPTLT 1,1,1,0,1,1,0,1,0,0,0,0
  OPTXL 1,1,1,1,1,1,1,0,0
  OPTFL 1,0,1
  OPTBL 0,(Add on databooks)<DATASHTS\ADDBOOKS.PDF>
  OPTBL 1,(User Manual)<DATASHTS\SST\SST89F5x_UM.PDF>
  OPTBL 2,(Data Sheet)<DATASHTS\SST\SST89F5x_DS.PDF>
  OPTDL (S8051.DLL)()(DP51.DLL)(-pSSTF58)(S8051.DLL)()(TP51.DLL)(-pSSTF58)
  OPTDBG 44029,0,()()()()()()()()()() ()()()()
  OPTKEY 0,(DLGDP51)((98=-1,-1,-1,-1,0)(82=-1,-1,-1,-1,0)(83=-1,-1,-1,-1,0)(84=-1,-1,-1,-1,0)(85=-1,-1,-1,-1,0)(99=-1,-1,-1,-1,0)(91=-1,-1,-1,-1,0)(92=-1,-1,-1,-1,0)(93=-1,-1,-1,-1,0))
  OPTWA 0,1,(Time)
  OPTWA 1,1,(Time)
  OPTDF 0x86
  OPTLE <>
  OPTLC <>
EndOpt