📄 dso.c
字号:
/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/*
* dso.c -- DSO system function emulation for AIX
*
* This is *only* intended for AIX < 4.3.
*/
/*
* Based on libdl (dlfcn.c/dlfcn.h) which is
* Copyright (c) 1992,1993,1995,1996,1997,1988
* Jens-Uwe Mager, Helios Software GmbH, Hannover, Germany.
*
* Not derived from licensed software.
*
* Permission is granted to freely use, copy, modify, and redistribute
* this software, provided that the author is not construed to be liable
* for any results of using the software, alterations are clearly marked
* as such, and this notice is not modified.
*
* Changes marked with `--jwe' were made on April 7 1996 by
* John W. Eaton <jwe@bevo.che.wisc.edu> to support g++
*
* Bundled, stripped and adjusted on April 1998 as one single source file
* for inclusion into the Apache HTTP server by
* Ralf S. Engelschall <rse@apache.org>
*
* Added to APR by David Reid April 2000
*/
#include <stdio.h>
#include <errno.h>
#include <string.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/ldr.h>
#include <a.out.h>
#include "apr_arch_dso.h"
#include "apr_portable.h"
#if APR_HAS_DSO
#undef FREAD
#undef FWRITE
#include <ldfcn.h>
/*
* AIX 4.3 does remove some useful definitions from ldfcn.h. Define
* these here to compensate for that lossage.
*/
#ifndef BEGINNING
#define BEGINNING SEEK_SET
#endif
#ifndef FSEEK
#define FSEEK(ldptr,o,p) fseek(IOPTR(ldptr),(p==BEGINNING)?(OFFSET(ldptr) +o):o,p)
#endif
#ifndef FREAD
#define FREAD(p,s,n,ldptr) fread(p,s,n,IOPTR(ldptr))
#endif
/*
* Mode flags for the dlopen routine.
*/
#undef RTLD_LAZY
#define RTLD_LAZY 1 /* lazy function call binding */
#undef RTLD_NOW
#define RTLD_NOW 2 /* immediate function call binding */
#undef RTLD_GLOBAL
#define RTLD_GLOBAL 0x100 /* allow symbols to be global */
/*
* To be able to initialize, a library may provide a dl_info structure
* that contains functions to be called to initialize and terminate.
*/
struct dl_info {
void (*init) (void);
void (*fini) (void);
};
/* APR functions...
*
* As the AIX functions have been declared in the header file we just
* add the basic "wrappers" here.
*/
APR_DECLARE(apr_status_t) apr_os_dso_handle_put(apr_dso_handle_t **aprdso,
apr_os_dso_handle_t osdso,
apr_pool_t *pool)
{
*aprdso = apr_pcalloc(pool, sizeof **aprdso);
(*aprdso)->handle = osdso;
(*aprdso)->pool = pool;
return APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_os_dso_handle_get(apr_os_dso_handle_t *osdso,
apr_dso_handle_t *aprdso)
{
*osdso = aprdso->handle;
return APR_SUCCESS;
}
static apr_status_t dso_cleanup(void *thedso)
{
apr_dso_handle_t *dso = thedso;
if (dso->handle != NULL && dlclose(dso->handle) != 0)
return APR_EINIT;
dso->handle = NULL;
return APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_dso_load(apr_dso_handle_t **res_handle,
const char *path, apr_pool_t *ctx)
{
void *os_handle = dlopen((char *)path, RTLD_NOW | RTLD_GLOBAL);
*res_handle = apr_pcalloc(ctx, sizeof(*res_handle));
if(os_handle == NULL) {
(*res_handle)->errormsg = dlerror();
return APR_EDSOOPEN;
}
(*res_handle)->handle = (void*)os_handle;
(*res_handle)->pool = ctx;
(*res_handle)->errormsg = NULL;
apr_pool_cleanup_register(ctx, *res_handle, dso_cleanup, apr_pool_cleanup_null);
return APR_SUCCESS;
}
APR_DECLARE(apr_status_t) apr_dso_unload(apr_dso_handle_t *handle)
{
return apr_pool_cleanup_run(handle->pool, handle, dso_cleanup);
}
APR_DECLARE(apr_status_t) apr_dso_sym(apr_dso_handle_sym_t *ressym,
apr_dso_handle_t *handle,
const char *symname)
{
void *retval = dlsym(handle->handle, symname);
if (retval == NULL) {
handle->errormsg = dlerror();
return APR_ESYMNOTFOUND;
}
*ressym = retval;
return APR_SUCCESS;
}
APR_DECLARE(const char *) apr_dso_error(apr_dso_handle_t *dso, char *buffer, apr_size_t buflen)
{
if (dso->errormsg) {
apr_cpystrn(buffer, dso->errormsg, buflen);
return dso->errormsg;
}
return "No Error";
}
/*
* We simulate dlopen() et al. through a call to load. Because AIX has
* no call to find an exported symbol we read the loader section of the
* loaded module and build a list of exported symbols and their virtual
* address.
*/
typedef struct {
char *name; /* the symbols's name */
void *addr; /* its relocated virtual address */
} Export, *ExportPtr;
/*
* xlC uses the following structure to list its constructors and
* destructors. This is gleaned from the output of munch.
*/
typedef struct {
void (*init) (void); /* call static constructors */
void (*term) (void); /* call static destructors */
} Cdtor, *CdtorPtr;
typedef void (*GccCDtorPtr) (void);
/*
* The void * handle returned from dlopen is actually a ModulePtr.
*/
typedef struct Module {
struct Module *next;
char *name; /* module name for refcounting */
int refCnt; /* the number of references */
void *entry; /* entry point from load */
struct dl_info *info; /* optional init/terminate functions */
CdtorPtr cdtors; /* optional C++ constructors */
GccCDtorPtr gcc_ctor; /* g++ constructors --jwe */
GccCDtorPtr gcc_dtor; /* g++ destructors --jwe */
int nExports; /* the number of exports found */
ExportPtr exports; /* the array of exports */
} Module, *ModulePtr;
/*
* We keep a list of all loaded modules to be able to call the fini
* handlers and destructors at atexit() time.
*/
static ModulePtr modList;
/*
* The last error from one of the dl* routines is kept in static
* variables here. Each error is returned only once to the caller.
*/
static char errbuf[BUFSIZ];
static int errvalid;
/*
* The `fixed' gcc header files on AIX 3.2.5 provide a prototype for
* strdup(). --jwe
*/
extern char *strdup(const char *);
static void caterr(char *);
static int readExports(ModulePtr);
static void terminate(void);
static void *findMain(void);
void *dlopen(const char *path, int mode)
{
register ModulePtr mp;
static void *mainModule;
/*
* Upon the first call register a terminate handler that will
* close all libraries. Also get a reference to the main module
* for use with loadbind.
*/
if (!mainModule) {
if ((mainModule = findMain()) == NULL)
return NULL;
atexit(terminate);
}
/*
* Scan the list of modules if we have the module already loaded.
*/
for (mp = modList; mp; mp = mp->next)
if (strcmp(mp->name, path) == 0) {
mp->refCnt++;
return mp;
}
if ((mp = (ModulePtr) calloc(1, sizeof(*mp))) == NULL) {
errvalid++;
strcpy(errbuf, "calloc: ");
strcat(errbuf, strerror(errno));
return NULL;
}
if ((mp->name = strdup(path)) == NULL) {
errvalid++;
strcpy(errbuf, "strdup: ");
strcat(errbuf, strerror(errno));
free(mp);
return NULL;
}
/*
* load should be declared load(const char *...). Thus we
* cast the path to a normal char *. Ugly.
*/
if ((mp->entry = (void *) loadAndInit((char *) path, L_NOAUTODEFER, NULL)) == NULL) {
free(mp->name);
free(mp);
errvalid++;
strcpy(errbuf, "dlopen: ");
strcat(errbuf, path);
strcat(errbuf, ": ");
/*
* If AIX says the file is not executable, the error
* can be further described by querying the loader about
* the last error.
*/
if (errno == ENOEXEC) {
char *tmp[BUFSIZ / sizeof(char *)];
if (loadquery(L_GETMESSAGES, tmp, sizeof(tmp)) == -1)
strcpy(errbuf, strerror(errno));
else {
char **p;
for (p = tmp; *p; p++)
caterr(*p);
}
}
else
strcat(errbuf, strerror(errno));
return NULL;
}
mp->refCnt = 1;
mp->next = modList;
modList = mp;
if (loadbind(0, mainModule, mp->entry) == -1) {
dlclose(mp);
errvalid++;
strcpy(errbuf, "loadbind: ");
strcat(errbuf, strerror(errno));
return NULL;
}
/*
* If the user wants global binding, loadbind against all other
* loaded modules.
*/
if (mode & RTLD_GLOBAL) {
register ModulePtr mp1;
for (mp1 = mp->next; mp1; mp1 = mp1->next)
if (loadbind(0, mp1->entry, mp->entry) == -1) {
dlclose(mp);
errvalid++;
strcpy(errbuf, "loadbind: ");
strcat(errbuf, strerror(errno));
return NULL;
}
}
if (readExports(mp) == -1) {
dlclose(mp);
return NULL;
}
/*
* If there is a dl_info structure, call the init function.
*/
if (mp->info = (struct dl_info *) dlsym(mp, "dl_info")) {
if (mp->info->init)
(*mp->info->init) ();
}
else
errvalid = 0;
/*
* If the shared object was compiled using xlC we will need
* to call static constructors (and later on dlclose destructors).
*/
if (mp->cdtors = (CdtorPtr) dlsym(mp, "__cdtors")) {
CdtorPtr cp = mp->cdtors;
while (cp->init || cp->term) {
if (cp->init && cp->init != (void (*)(void)) 0xffffffff)
(*cp->init) ();
cp++;
}
/*
* If the shared object was compiled using g++, we will need
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -