embedded_systems_resume.htm

Samples are artificially generated and in no way represent particular individuals. Human names, comp

CA</STRONG><BR>Senior Consulting Embedded Engineer 
<UL>
  <LI>Designed and developed firmware for a PCS paging receiver, was 
  instrumental in the board bring-up, developed BIOS 
  <LI>Debugged hardware, installed a Real Time Operating System, debugged 
  Ethernet connection, wrote peripheral device drivers using C, C++ and assembly 

  <LI>Implemented user interface, ported TCP/IP stack, developed a Telnet 
  interface, an SNMP agent, TFTP flash-based in system re-programmable solution 
  </LI></UL><STRONG>December, 1997 to September, 1998<BR>ABG Condition Monitoring, 
Inc., San Diego, CA</STRONG><BR>Senior Consulting Embedded Engineer 
<UL>
  <LI>Designed C - based embedded firmware for a sophisticated hand - held 
  instrument 
  <LI>Designed and debugged hardware, developed kernel 
  <LI>Developed and implemented a communication protocol stack 
  <LI>Wrote device drivers for DOS, Windows and Lab-View. </LI></UL><STRONG>April, 
1998 to August, 1998 <BR>Abby Design Center, San Diego, CA</STRONG><BR>Senior 
Consulting Embedded Engineer 
<UL>
  <LI>Designed and implemented interrupt driven MPEG-2 A-V synchronization using 
  interrupts on RTOS (PSOS), C++ 
  <LI>Debugged hardware, installed RTOS and remote Ethernet-based debugging 
  <LI>Wrote video device drivers for PSOS running on RISC architecture 
  <LI>Successfully lead the debugging of the system </LI></UL><STRONG>September, 
1997 to December, 1997<BR>RTE, Inc., Denver, CO</STRONG><BR>Consulting Embedded 
Engineer 
<UL>
  <LI>Designed and developed a cable modem-based communication interface for an 
  interactive television set-top box. 
  <LI>Designed and debugged hardware, installed operating system, wrote drivers 
  for the peripherals in C and C++ </LI></UL><STRONG>March, 1996 to September, 
1996<BR>Softstream, Inc., Santa Cruz, CA</STRONG><BR>Consulting Senior Embedded 
Engineer 
<UL>
  <LI>Designed and implemented MPEG-2 video-audio synchronization into digital 
  set-top box. 
  <LI>Debugged and redesigned hardware, built RTOS into the product, (PSOS and 
  VxWorks device drivers) </LI></UL><STRONG>November, 1995 to January, 1996 
<BR>United Instrument, Inc., San Jose, CA</STRONG><BR>Consulting Senior Embedded 
Engineer 
<UL>
  <LI>Designed and implemented Built-in Self-Test (BIST) into the digital 
  television set-top box, installed a multitasking operating system 
  <LI>Installed a VxWorks operating system on a prototype platform (board 
  bring-up) 
  <LI>Tested, improved and redesigned digital hardware. 
  <LI>Wrote and debugged complex code in C++ , developed numerous device drivers 
  running under MMOS RTOS; running on RISC and CISC processors 
</LI></UL><STRONG>1990-1995<BR>Held engineering positions in the following 
companies:</STRONG><BR>
<UL>
  <LI>Fujitsu 
  <LI>M.L.Hightower, Inc. 
  <LI>Transworld, Inc. 
  <LI>Datron, Inc. 
  <LI>Deltec,Inc. </LI></UL>
<P align=right><A 
href="http://www.portnov.com/FreeResumeSample/EmbeddedSystemsResume.htm#Up">Up</A></P>
<HR>
<A name=5>
<H2 align=center>Resume 5</H2></A><B><FONT size=4>Harry Stanson 
</FONT></B><BR>737 Ocean Drive<BR>San Jose, CA 95133 
<P></P><STRONG>OBJECTIVE </STRONG>
<P>Seeking a challenging position in professional development with a technology 
related company and offering continuous growth opportunities. 
</P><STRONG>SUMMARY OF SKILLS </STRONG>
<UL>
  <LI>Languages: C++, Visual C++/MFC, C, Verilog, VHDL, Assembler, LabVIEW. 
  <LI>CPUs: PIC-16C/18C, 8051, 80186, 68HC11, Z-80, Verilog, HDLC, StrongArm, 
  IXP1200. 
  <LI>FPGA: Virtex-E XCV50E, Verilog, VHDL, FPGA Foundation ISE v3.1i 
  <LI>Operating Systems: UNIX/Linux, MS Windows/NT, DOS, VxWorks. 
  <LI>Network protocols: SNMP, TCP/IP, Win-Sockets. 
  <LI>ICEs &amp; BSP: ICE-2000/Microchip, EMUL51-68-PC/Nohau, ICE-186/Sophia, 
  IXP1200 BSP. 
  <LI>Tools: HP OpenView, EMANATE Subagent Development Kit, IXP1200 Developers 
  Workbench, Gnu-Make, gdb, Clearcase, Visual SourceSafe, Logic Analyzer, 
  Oscilloscope. </LI></UL><STRONG>ACCOMPLISHMENTS </STRONG>
<UL>
  <LI>Developed and designed SNMP proxy agents and MIB files to monitor the 
  managed objects and response the Cable Network Manager CNM requests in the HFC 
  network. The data from managed objects is measured by transponders and 
  transmitted to CNM using telemetry facilities. The SNMP manager-agent model is 
  a multi-threaded program, which runs in the Microsoft NT with Oracle Database, 
  and uses Microsoft DCOM to make connection and communication with other 
  programs. The software test used OpenView and Web browser. 
  <LI>HFC HeadEnd products software-firmware designed and developed from 
  software specification to product release: Forward Path Transmitter/Receiver, 
  Reverse Path Transmitter/Receiver, Redundant RPR, Power Supply, and EDFA. 
  Coded in C and assemblers PIC16/18 and 68HC11 . 
  <LI>Developed and designed a Fibre Channel 8b/10b en-decoder FPGA for Digital 
  Return Transmitter-Receiver. The RTL coding is Verilog and the FPGA device is 
  Xilinx XCV50. 
  <LI>Developed SNMP Agents on IXP1200 development platform with VxWorks: 
  Designed the collection of statistic of network management for Ethernet 
  interface. 
  <LI>Distortion Auto Test program for HeadEnd products: Performance test for 
  CNR, CSO, CTB, XMOD, and Spurious Noise. Using Matrix s CATV Equipment, 
  Network Analyzer, and Cable TV Spectrum Analyzer. 
  <LI>Laser s embedded system software: Developed and designed the power 
  management heater/compressor real-time control, energy saving sub-routine , 
  laser shutter control, shift register read/write, eeprom repair function, 
  power/current/diode mode control, external/internal RF driver control, laser 
  diode protection method in power mode, ADC/DAC/multiplexer/demultiplexer 
  control, and laser diode ages process. 
  <LI>Laser monitoring program: This program used ActiveX component/control to 
  handle the rs-232 communication problems, to process multiple Views terminal, 
  monitoring, and config with single document, and to store configuration data 
  into database-registry. 
  <LI>Remote control software: Programmed on PSD-311 chip, and control and 
  communication between 8051 microcontroller and laser power supply system 
  through RS-232. 
  <LI>Laser system performance auto test program: Graphic display on the screen 
  with power, current, temperature, min/max, time, and deviation. This program 
  also has the functions such as: sampling rate, delay time, auto timer, data 
  storage, data file restoring, and printing with any scale factor on x/y axis. 
  <LI>Developed and designed ALPS-3000 Automated Laser Pigtailing System for 
  rapid and reliable laser diode pigtailing with any package in a high volume 
  production environment. The system used a PC as the single control point for 
  the laser diode controller, optical power meter, YAG laser welder, joysticks, 
  vision system, and 3-dimensions motor motion controllers. 
  <LI>Designed the Plotting Statistical Analysis Software PSAS program to 
  support laser diode test system for mathematics graphic display on life test 
  curves, PVI curves, and pass/fail status report. PSAS is a MS Windows/MFC 
  program. 
  <LI>Designed and implemented the program of Automatic Components Test System 
  ACTS . ACTS software drives fiber optic switches and associated equipment 
  light sources, power meters, polarization controller, environment ovens to 
  carry out measurements of attenuation and back reflection on optical 
  components as they are stressed in environmental chambers. 
  <LI>Implemented the flash memory AMD Am28F512 program designed. Written in Z80 
  assembler. 
  <LI>Designed software and firmware for Polarization Controller and test 
  station. Coded in C and Z80 assembler. 
  <LI>Fiirmware designed for fiberoptic Switching System. Written in C and 8051 
  assembler. 
  <LI>Designed and developed PC X-Server Micro-X to support graphical 
  applications across networks to other computer systems, that support the X 
  Window System in UNIX environment. Written in C, X-Windows and with Win-socket 
  and TCP/IP protocols. 
  <LI>Firmware/software program designed and developed on MNP5/V.32/V.42bis 
  modems. Written in 80186 and 8051 assemblers. </LI></UL><STRONG>WORK HISTORY 
</STRONG>
<UL>
  <LI>Sr. Software Engineer, SomeCOR.net Corp., Oct. 1998 Nov. 2001 
  <LI>Sr. Software Engineer, Vectra-Physics, Inc., June 1996 Oct. 1998 
  <LI>Software Engineer, TDS Uniphase Corp., May 1994 June 1996 
  <LI>Software Engineer, Starlet Communications Corp., Jan. 1992 April 1994 
  <LI>Firmware Engineer, Micro Integrated Comm. Corp., Feb. 1990 Jan. 1992 
</LI></UL><STRONG>EDUCATION </STRONG>
<UL>
  <LI>Master Program of Computer Science, San Jose State University, CA. Sept. 
  1994 May 1995 
  <LI>MSEE, University of Memphis, Tennessee. Sept. 1988 Dec. 1989 
  <LI>BSEE, National Taiwan Ocean University, Sept. 1980 May. 1984 
</LI></UL><STRONG>PROFESSIONAL TRAINING </STRONG>
<UL>
  <LI>Tornado 2/VxWorks 5.4 Training Workshop, Wind River Systems, CA. 
  <LI>HP OpenView Network Node Manager on Unix, Hewlett-Packard, CA. 
  <LI>Introduction to VHDL with Foundation ISE, Xilinx Inc, CA. 
  <LI>FPGA Design, Xilinx Inc, CA. 
  <LI>Unified Modeling Language 
  <LI>Programming with Microsoft Foundation Class Libraries 
  <LI>Advanced Programming with MFC Library using Visual C++ 
  <LI>Microsoft Windows Debug Technique 
  <LI>Object-Oriented Analysis 
  <LI>Object-Oriented Programming Design. 
  <LI>OLE 2.0 Programming Using MFC and Visual C++ 
  <LI>Network Management Principles 
  <LI>Managing a UNIX TCP/IP Network 
  <LI>The TCP/IP Protocol Suite Network File System and Network Information 
  Service </LI></UL>CITIZENSHIP U.S. Citizen 
<P align=right><A 
href="http://www.portnov.com/FreeResumeSample/EmbeddedSystemsResume.htm#Up">Up</A></P>
<HR>
<A name=6>
<H2 align=center>Resume 6</H2></A><B><FONT size=4>Fred D. Ivy 
</FONT></B><BR><BR>
<P></P><STRONG>Seeking</STRONG> 
<P>A Director of Engineering or Architect position at a small product oriented 
company responsible for project management, resource management, strategic 
involvement in the corporate business and product development strategy, and an 
integral member of the management team. </P><STRONG>Introduction</STRONG> 
<P>My experience in the engineering field extends 15 years, most of this time at 
start-up/small companies. It is in this environment where my ability to grasp 
complex problems quickly and resolve them enables constant forward progress. I 
know how to set up an effective team, manage to the schedules and ship products. 
I have been called upon at many different companies to accomplish these tasks 
and have been successful every time.</P>
<P>In addition, my proven track record of building effective engineering teams 
using positive people centric mentoring and a hands-on, team oriented management 
style has ensured success. I am often approached by members of my previous teams 
who are looking to move forward. In fact, many of my direct reports have worked 
for me several times.</P>
<P>References from previous managers, colleagues and direct reports are 
available on request.</P><STRONG>Qualifications</STRONG> 
<UL>
  <LI>Strong people and project management skills. 
  <LI>Able to realistically judge project time and deliver on schedule. 
  <LI>Natural leader able to motivate others effectively. 
  <LI>Knowledge of real time and communications/network implementations. 
  <LI>Well-versed in negotiation techniques 
  <LI>Self motivating/starter requiring little resource overhead. 
  <LI>Adept at project cost analysis and customer relations. 
  <LI>Good organizational skills with emphasis on quality. 
</LI></UL><STRONG>Experience</STRONG> 
<P></P><STRONG>2001 - present<BR>Aishe Consulting Services, Los Colinas, 
California</STRONG><BR>Principle 
<P>Linux and Embedded design </P>
<UL>
  <LI>Created JPEG presentation display system for overhead projectors using 
  PCMCIA. 
  <LI>Added Hard disk and LCD screen to projector project for use as running 
  advertising. 
  <LI>Extensive Linux Kernel work in Multimedia drivers using PowerPC. 
  <LI>Working with small, to be named, start-up to raise first round funding and 
  establish core engineering team. </LI></UL><STRONG>2001 - present<BR>Digital New 
Technologies, Sacramento, California </STRONG><BR>Product Development 
<P>Linux and Embedded design consumer MP3 player </P>