📄 portmacro.h
字号:
/*
FreeRTOS.org V4.7.1 - Copyright (C) 2003-2008 Richard Barry.
This file is part of the FreeRTOS.org distribution.
FreeRTOS.org is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
FreeRTOS.org is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with FreeRTOS.org; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
A special exception to the GPL can be applied should you wish to distribute
a combined work that includes FreeRTOS.org, without being obliged to provide
the source code for any proprietary components. See the licensing section
of http://www.FreeRTOS.org for full details of how and when the exception
can be applied.
***************************************************************************
Please ensure to read the configuration and relevant port sections of the
online documentation.
+++ http://www.FreeRTOS.org +++
Documentation, latest information, license and contact details.
+++ http://www.SafeRTOS.com +++
A version that is certified for use in safety critical systems.
+++ http://www.OpenRTOS.com +++
Commercial support, development, porting, licensing and training services.
***************************************************************************
*/
/*
Changes from V3.2.3
+ Modified portENTER_SWITCHING_ISR() to allow use with GCC V4.0.1.
Changes from V3.2.4
+ Removed the use of the %0 parameter within the assembler macros and
replaced them with hard coded registers. This will ensure the
assembler does not select the link register as the temp register as
was occasionally happening previously.
+ The assembler statements are now included in a single asm block rather
than each line having its own asm block.
Changes from V4.5.0
+ Removed the portENTER_SWITCHING_ISR() and portEXIT_SWITCHING_ISR() macros
and replaced them with portYIELD_FROM_ISR() macro. Application code
should now make use of the portSAVE_CONTEXT() and portRESTORE_CONTEXT()
macros as per the V4.5.1 demo code.
*/
#ifndef PORTMACRO_H
#define PORTMACRO_H
#ifdef __cplusplus
extern "C" {
#endif
/*-----------------------------------------------------------
* Port specific definitions.
*
* The settings in this file configure FreeRTOS correctly for the
* given hardware and compiler.
*
* These settings should not be altered.
*-----------------------------------------------------------
*/
/* Type definitions. */
#define portCHAR char
#define portFLOAT float
#define portDOUBLE double
#define portLONG long
#define portSHORT short
#define portSTACK_TYPE unsigned portLONG
#define portBASE_TYPE portLONG
#if( configUSE_16_BIT_TICKS == 1 )
typedef unsigned portSHORT portTickType;
#define portMAX_DELAY ( portTickType ) 0xffff
#else
typedef unsigned portLONG portTickType;
#define portMAX_DELAY ( portTickType ) 0xffffffff
#endif
/*-----------------------------------------------------------*/
/* Architecture specifics. */
#define portSTACK_GROWTH (-1)
#define portTICK_RATE_MS ((portTickType)1000/configTICK_RATE_HZ)
#define portBYTE_ALIGNMENT 4
#define portNOP() asm volatile ("NOP");
/*-----------------------------------------------------------*/
/* Scheduler utilities. */
/*
* portRESTORE_CONTEXT, portRESTORE_CONTEXT, portENTER_SWITCHING_ISR
* and portEXIT_SWITCHING_ISR can only be called from ARM mode, but
* are included here for efficiency. An attempt to call one from
* THUMB mode code will result in a compile time error.
*/
#define portRESTORE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile unsigned portLONG ulCriticalNesting; \
\
/* Set the LR to the task stack. */ \
asm volatile ( \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"LDR LR, [R0] \n\t" \
\
/* The critical nesting depth is the first item on the stack. */ \
/* Load it into the ulCriticalNesting variable. */ \
"LDR R0, =ulCriticalNesting \n\t" \
"LDMFD LR!, {R1} \n\t" \
"STR R1, [R0] \n\t" \
\
/* Get the SPSR from the stack. */ \
"LDMFD LR!, {R0} \n\t" \
"MSR SPSR, R0 \n\t" \
\
/* Restore all system mode registers for the task. */ \
"LDMFD LR, {R0-R14}^ \n\t" \
"NOP \n\t" \
\
/* Restore the return address. */ \
"LDR LR, [LR, #+60] \n\t" \
\
/* And return - correcting the offset in the LR to obtain the */ \
/* correct address. */ \
"SUBS PC, LR, #4 \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
/*-----------------------------------------------------------*/
#define portSAVE_CONTEXT() \
{ \
extern volatile void * volatile pxCurrentTCB; \
extern volatile unsigned portLONG ulCriticalNesting; \
\
/* Push R0 as we are going to use the register. */ \
asm volatile ( \
"STMDB SP!, {R0} \n\t" \
\
/* Set R0 to point to the task stack pointer. */ \
"STMDB SP,{SP}^ \n\t" \
"NOP \n\t" \
"SUB SP, SP, #4 \n\t" \
"LDMIA SP!,{R0} \n\t" \
\
/* Push the return address onto the stack. */ \
"STMDB R0!, {LR} \n\t" \
\
/* Now we have saved LR we can use it instead of R0. */ \
"MOV LR, R0 \n\t" \
\
/* Pop R0 so we can save it onto the system mode stack. */ \
"LDMIA SP!, {R0} \n\t" \
\
/* Push all the system mode registers onto the task stack. */ \
"STMDB LR,{R0-LR}^ \n\t" \
"NOP \n\t" \
"SUB LR, LR, #60 \n\t" \
\
/* Push the SPSR onto the task stack. */ \
"MRS R0, SPSR \n\t" \
"STMDB LR!, {R0} \n\t" \
\
"LDR R0, =ulCriticalNesting \n\t" \
"LDR R0, [R0] \n\t" \
"STMDB LR!, {R0} \n\t" \
\
/* Store the new top of stack for the task. */ \
"LDR R0, =pxCurrentTCB \n\t" \
"LDR R0, [R0] \n\t" \
"STR LR, [R0] \n\t" \
); \
( void ) ulCriticalNesting; \
( void ) pxCurrentTCB; \
}
#define portYIELD_FROM_ISR() vTaskSwitchContext()
#define portYIELD() asm volatile ( "SWI" )
/*-----------------------------------------------------------*/
/* Critical section management. */
/*
* The interrupt management utilities can only be called from ARM mode. When
* THUMB_INTERWORK is defined the utilities are defined as functions in
* portISR.c to ensure a switch to ARM mode. When THUMB_INTERWORK is not
* defined then the utilities are defined as macros here - as per other ports.
*/
#ifdef THUMB_INTERWORK
extern void vPortDisableInterruptsFromThumb( void ) __attribute__ ((naked));
extern void vPortEnableInterruptsFromThumb( void ) __attribute__ ((naked));
#define portDISABLE_INTERRUPTS() vPortDisableInterruptsFromThumb()
#define portENABLE_INTERRUPTS() vPortEnableInterruptsFromThumb()
#else
#define portDISABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"ORR R0, R0, #0xC0 \n\t" /* Disable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#define portENABLE_INTERRUPTS() \
asm volatile ( \
"STMDB SP!, {R0} \n\t" /* Push R0. */ \
"MRS R0, CPSR \n\t" /* Get CPSR. */ \
"BIC R0, R0, #0xC0 \n\t" /* Enable IRQ, FIQ. */ \
"MSR CPSR, R0 \n\t" /* Write back modified value. */ \
"LDMIA SP!, {R0} " ) /* Pop R0. */
#endif /* THUMB_INTERWORK */
extern void vPortEnterCritical( void );
extern void vPortExitCritical( void );
#define portENTER_CRITICAL() vPortEnterCritical();
#define portEXIT_CRITICAL() vPortExitCritical();
/*-----------------------------------------------------------*/
/* Task function macros as described on the FreeRTOS.org WEB site. */
#define portTASK_FUNCTION_PROTO( vFunction, pvParameters ) void vFunction( void *pvParameters )
#define portTASK_FUNCTION( vFunction, pvParameters ) void vFunction( void *pvParameters )
#ifdef __cplusplus
}
#endif
#endif /* PORTMACRO_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -