patch-2.4.19-rmk7

GCC3.2.1-GLIBC2.2.5-LINUX2.4.19-RMK7-PXA2交叉编译脚本

diff -urN orig/CREDITS linux/CREDITS
--- orig/CREDITS	Mon Aug  5 13:29:38 2002
+++ linux/CREDITS	Mon Aug  5 13:41:06 2002
@@ -2215,6 +2215,15 @@
 S: Potsdam, New York 13676
 S: USA
 
+N: Dave Neuer
+E: [e-mail]
+E: [e-mail]
+D: Helped implement support for Compaq's H31xx series iPAQs
+D: Other mostly minor tweaks & bugfixes
+S: 325 E. Main St., Suite 3
+S: Carnegie, PA 15105
+S: USA
+
 N: Michael Neuffer
 E: [e-mail]
 E: [e-mail]
diff -urN orig/Documentation/Configure.help linux/Documentation/Configure.help
--- orig/Documentation/Configure.help	Mon Aug  5 13:29:39 2002
+++ linux/Documentation/Configure.help	Thu Feb 27 23:20:12 2003
@@ -4090,6 +4090,13 @@
   Say Y to enable support for Permedia2 AGP frame buffer card from
   3Dlabs (aka `Graphic Blaster Exxtreme') on the PCI bus.
 
+Permedia3 support (EXPERIMENTAL)
+CONFIG_FB_PM3
+  This is the frame buffer device driver for the 3DLabs Permedia3
+  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+  and maybe other boards.
+
 Phase5 CVisionPPC/BVisionPPC support
 CONFIG_FB_PM2_CVPPC
   Say Y to enable support for the Amiga Phase 5 CVisionPPC BVisionPPC
@@ -9558,7 +9565,7 @@
   whenever you want).  If you want to compile it as a module, say M
   here and read <file:Documentation/modules.txt>.
 
-CSZ packet scheduler
+CSZ packet scheduler (experimental)
 CONFIG_NET_SCH_CSZ
   Say Y here if you want to use the Clark-Shenker-Zhang (CSZ) packet
   scheduling algorithm for some of your network devices.  At the
@@ -11648,6 +11655,17 @@
   The module will be called tmspci.o. If you want to compile it
   as a module, say M here and read <file:Documentation/modules.txt>.
 
+Altera ether00 support
+CONFIG_ETHER00
+  This is the driver for Altera's ether00 ethernet mac IP core. Say
+  Y here if you want to build support for this into the kernel. It
+  is also available as a module (say M here) that can be inserted/
+  removed from the kernel at the same time as the PLD is configured. 
+  If this driver is running on an epxa10 development board then it 
+  will generate a suitable hw address based on the board serial 
+  number (MTD support is required for this). Otherwise you will 
+  need to set a suitable hw address using ifconfig.
+
 Generic TMS380 ISA support
 CONFIG_TMSISA
   This tms380 module supports generic TMS380-based ISA cards.
@@ -11680,6 +11698,7 @@
   The module will be called madgemc.o. If you want to compile it
   as a module, say M here and read <file:Documentation/modules.txt>.
 
+
 SMC ISA/MCA Token Ring adapter support
 CONFIG_SMCTR
   This is support for the ISA and MCA SMC Token Ring cards,
@@ -13278,6 +13297,16 @@
   support" be compiled as a module for this driver to be used
   properly.
 
+Altera's uart00 serial driver
+CONFIG_SERIAL_UART00
+  Say Y here if you want to use the hard logic uart on Excalibur. This 
+  driver also supports soft logic implentations of this uart core.
+
+Serial console on uart00 
+CONFIG_SERIAL_UART00_CONSOLE
+  Say Y here if you want to support a serial console on an Excalibur
+  hard logic uart or uart00 IP core.
+
 USB ConnectTech WhiteHEAT Serial Driver
 CONFIG_USB_SERIAL_WHITEHEAT
   Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
@@ -16841,6 +16870,20 @@
   <file:Documentation/modules.txt>.
   The module will be called i2c-velleman.o.
 
+Guide GPIO adapter
+CONFIG_I2C_GUIDE
+  This supports the Iders GUIDE I2C bit-bashing adapter.  If you have
+  selected the GUIDE A07 as your ARM system type, you cannot deselect
+  this option, as it is required for proper operation of the GUIDE.
+
+  This interface uses /dev/i2c-0 (major 89, minor 0).
+
+  Say Y if you own such an adapter.
+
+  This driver is also available as a module. If you want to compile
+  it as a module, say M here and read Documentation/modules.txt. The
+  module will be called i2c-guide.o.
+
 I2C PCF 8584 interfaces
 CONFIG_I2C_ALGOPCF
   This allows you to use a range of I2C adapters called PCF adapters.
@@ -17893,6 +17936,17 @@
   <file:Documentation/modules.txt>. The module will be called
    softdog.o.
 
+SA1100 Internal Watchdog
+CONFIG_SA1100_WATCHDOG
+  Watchdog timer embedded into SA11x0 chips. This will reboot your
+  system when timeout is reached.
+  NOTE, that once enabled, this timer cannot be disabled.
+
+  This driver is also available as a module ( = code which can be
+  inserted in and removed from the running kernel whenever you want).
+  If you want to compile it as a module, say M here and read
+  Documentation/modules.txt. The module will be called sa1100_wdt.o.
+
 Berkshire Products PC Watchdog
 CONFIG_PCWATCHDOG
   This is the driver for the Berkshire Products PC Watchdog card.
@@ -19480,6 +19534,30 @@
   from RME. If you want to acess advanced features of the card, read
   Documentation/sound/rme96xx.
 
+Assabet audio (UDA1341) support
+CONFIG_SOUND_ASSABET_UDA1341
+  Say Y or M if you have an Intel Assabet evaluation board and want to
+  use the Philips UDA 1341 audio chip (the one that drives the stereo
+  audio output) on the SA1100 SSP port.
+
+Compaq iPAQ audio support
+CONFIG_SOUND_H3600_UDA1341
+  Say Y or M if you have a Compaq iPaq handheld computer and want to
+  use its Philips UDA 1341 audio chip.
+
+Audio support for SA1111/UDA1341
+CONFIG_SOUND_SA1111_UDA1341
+  Say Y or M if you have an SA11x0 system with a Philips UDA 1341
+  connected to the SA11x1. An example of such a system is the Intel
+  Assabet evaluation board connected to a Neponset expansion board.
+
+Generic DAC on the SA11x0 SSP port
+CONFIG_SOUND_SA1100SSP
+  Say Y or M if you have an SA-11x0 system with a DAC on the SSP port.
+  The LART has an Burr-Brown PCM 1710 digital to analog convertor on
+  the SSP port, so you want to say Y or M for the LART. It might work
+  on other SA-1100 platforms, too, but this is not tested.
+
 Are you using a crosscompiler
 CONFIG_CROSSCOMPILE
   Say Y here if you are compiling the kernel on a different
@@ -22834,6 +22912,20 @@
   Say Y if configuring for a Pangolin.
   Say N otherwise.
 
+Shannon
+CONFIG_SA1100_SHANNON
+  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
+  limited edition webphone produced by Philips. The Shannon is a SA1100
+  platform with a 640x480 LCD, touchscreen, CIR keyboard, PCMCIA slots,
+  and a telco interface.
+
+Simputer
+CONFIG_SA1100_SIMPUTER
+  Say Y here if you are using an Intel(R) StrongARM(R) SA-1110
+  based Simputer.  See http://www.simputer.org/ for information
+  on the Simputer. The Simputer software is actively maintained
+  by PicoPeta Simputers Pvt. Ltd. (http://www.picopeta.com)
+
 Victor
 CONFIG_SA1100_VICTOR
   Say Y here if you are using a Visu Aide Intel(R) StrongARM(R)
@@ -22841,6 +22933,14 @@
   <http://www.visuaide.com/pagevictor.en.html> for information on
   this system.
 
+Radisys Corp. Tulsa
+CONFIG_SA1100_PFS168
+  The Radisys Corp. PFS-168 (aka Tulsa) is an Intel