led屏.c

LED.rar LED.rar

#include <at89x52.h>
#include <absacc.h>


xdata unsigned char DATA1[8] _at_ 0x0100;
xdata unsigned char DATA2[8] _at_ 0x0200;
xdata unsigned char COM0 _at_ 0x0300;
xdata unsigned char COM1 _at_ 0x0301;
xdata unsigned char COM2 _at_ 0x0302;
xdata unsigned char COM3 _at_ 0x0303;
code Con[]={0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f};
code unsigned hz[]={
/*--  文字:  Ｌ  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x1E,0x00,0x0C,0x00,0x0C,0x00,0x0C,0x00,0x0C,0x00,
0x0C,0x00,0x0C,0x00,0x0C,0x20,0x0C,0x40,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  Ｅ  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xE0,0x08,0x20,0x08,0x10,0x08,0x80,0x08,0x80,
0x0F,0x80,0x08,0x80,0x08,0x80,0x08,0x10,0x1F,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  Ｄ  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0x80,0x08,0x60,0x08,0x20,0x08,0x30,0x08,0x30,
0x08,0x10,0x08,0x30,0x08,0x20,0x08,0x60,0x1F,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  显  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xE0,0x10,0x20,0x1F,0xE0,0x10,0x20,0x14,0xA0,
0x1F,0xF0,0x14,0xB0,0x34,0xA0,0x14,0xC0,0x14,0x88,0xFF,0xFC,0x00,0x00,0x00,0x00,

/*--  文字:  示  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0xF0,0x00,0x00,0x00,0x18,0x3F,0xFC,
0x11,0x00,0x0D,0x40,0x19,0x20,0x31,0x10,0x21,0x18,0x45,0x08,0x03,0x00,0x00,0x00,

/*--  文字:  试  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x40,0x30,0x70,0x10,0x50,0x10,0x48,0x2F,0xFC,0xF0,0x40,
0x27,0xC0,0x22,0x40,0x22,0x20,0x2A,0x24,0x33,0x24,0x2C,0x18,0x20,0x08,0x00,0x00,

/*--  文字:  验  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x80,0xF8,0xC0,0x59,0xC0,0x51,0x20,0x52,0x18,0x54,0x30,
0x7F,0xF0,0x06,0xB0,0x05,0x60,0xE5,0x60,0x05,0x48,0x3B,0xF8,0x18,0x00,0x00,0x00,

/*--  文字:  ！  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x38,0x00,0x30,0x00,0x10,0x00,0x10,0x00,0x10,0x00,
0x10,0x00,0x10,0x00,0x00,0x00,0x10,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  ＜  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x01,0xC0,0x0E,0x00,
0x30,0x00,0x18,0x00,0x07,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  ＜  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x01,0xC0,0x0E,0x00,
0x30,0x00,0x18,0x00,0x07,0x00,0x00,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  欢  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x01,0x90,0x7D,0xF8,0x0D,0x10,0x4A,0xE0,
0x2C,0xC0,0x18,0xC0,0x19,0xA0,0x19,0x20,0x25,0x30,0x46,0x18,0x88,0x00,0x00,0x00,

/*--  文字:  迎  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x01,0x00,0x21,0x80,0x16,0x78,0x14,0x48,0x14,0x48,0x7C,0x48,
0x14,0x48,0x16,0x48,0x1C,0x78,0x10,0x40,0x10,0x40,0x6F,0x3C,0x03,0xF8,0x00,0x00,

/*--  文字:  使  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x80,0x18,0x90,0x17,0xF8,0x14,0x90,0x37,0xF0,
0x54,0x90,0x17,0xF0,0x12,0x90,0x12,0x80,0x11,0x00,0x11,0xC0,0x1E,0x30,0x00,0x00,

/*--  文字:  用  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x1F,0xF0,0x11,0x10,0x11,0x10,0x1F,0xF0,0x11,0x10,
0x11,0x10,0x1F,0xF0,0x11,0x10,0x11,0x10,0x11,0x10,0x21,0x50,0x21,0x30,0x00,0x00,

/*--  文字:  ＞  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x0E,0x00,0x01,0xC0,
0x00,0x30,0x00,0x60,0x03,0x80,0x1C,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,

/*--  文字:  ＞  --*/
/*--  华文中宋11;  此字体下对应的点阵为：宽x高=14x16   --*/
/*--  宽度不是8的倍数，现调整为：宽度x高度=16x16  --*/
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x00,0x0E,0x00,0x01,0xC0,
0x00,0x30,0x00,0x60,0x03,0x80,0x1C,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,


};
void delay(unsigned char n)
{
while(--n) ;
}
main()
{
	unsigned int i,k=0,a,b;
	while(1)
	{
		COM2=COM3=0xff;
		 for(k=0;k<16;k++)
		 {
		 	 for(i=0;i<8;i++){ DATA1[i]=0;DATA2[i]=0;}
			 if(k<8){COM0=Con[k];COM1=0xff;}else{COM1=Con[k-8];COM0=0xff;}
			 for(i=0;i<4;i++)
			 {
			 	a=k*2;b=i*32;
			 	DATA1[i*2]=  hz[a+b];
				DATA1[i*2+1]=hz[a+1+b];
				DATA2[i*2]=  hz[a+b+4*32];
				DATA2[i*2+1]=hz[a+1+b+4*32];
			}
			 delay(125);
		 }   
		  COM0=COM1=0xff;  
		 for(k=0;k<16;k++)
		 {
		 	 for(i=0;i<8;i++){ DATA1[i]=0;DATA2[i]=0;}
			 if(k<8){COM2=Con[k];COM3=0xff;}else{COM3=Con[k-8];COM2=0xff;}
			 for(i=0;i<4;i++)
			 {
			 	a=k*2;b=i*32;
			 	DATA1[i*2]=  hz[a+b+8*32];
				DATA1[i*2+1]=hz[a+1+b+8*32];
				DATA2[i*2]=  hz[a+b+12*32];
				DATA2[i*2+1]=hz[a+1+b+12*32];
			}
			 delay(125);	
		 }
	}  
}