rj45.txt

这可是一个重量级工具

Распиновка разъема RG-45 в UFS-3 Tornado Flasher:
8 = Подается 5V питание для прошивок (переключается программно) 
7 = GND (общий) 
6 = Mbus/C-bus 
5 = TX (передача, данные к телефону) 
4 = RX (прием, данные из телефона) 
3 = IBI (не поддерживается) 
2 = P3v - Питание (3 volt) (постоянное напряжение) 
1 = P5v - Питание (5 volt) (постоянное напряжение)

Raspinovka of joint Rg-45 in Ufs-3 Tornado Flasher:
8 = will be given 5V nourishment for the piercings (it is switched by program)
7 = GND (general)
6 = Mbus/C-bus
5 = TX (transfer, the data to the telephone)
4 = RX (method, the data from the telephone)
3 = IBI (it is not supported)
2 = P3v - nourishment (3 volt) (constant stress)
1 = P5v - nourishment (5 volt) (constant stress) 

Raspinovka RG-45 connector in the UFS-3 Tornado Flasher : 
Served 8 = 5V power for proshivok (software switches)
7 = GND (total)
6 = Mbus/C-bus 
5 = TX (transfer of data to your phone)
4 = RX (receive data from the phone)
3 = IBI (not available) 
2 = P3v-eat (3 volt) (constant voltage)
1 = P5v-eat (5 volt) (constant voltage)