usb_kbd_enum.c

at89c5132,at89c51snd1的usb与keyboard驱动程序。

          pbuffer = &(usb_serial_number.bLength);
          break;
        }
        default:
        {
          Usb_clear_rx_setup();
          Usb_set_stall_request(); 
          while ((!(Usb_stall_sent())) && (Usb_setup_received()));
          Usb_clear_stalled();
          Usb_clear_stall_request();
          Usb_clear_DIR();
          return;
        }
      }
      break;
    }

    default:
    {
      Usb_clear_rx_setup();
      Usb_set_stall_request();
      while ((!(Usb_stall_sent())) && (Usb_setup_received()));
      Usb_clear_stalled();
      Usb_clear_stall_request();
      Usb_clear_DIR();
      return;
    }
  }

  ACC = Usb_read_byte();                    /* don't care of wIndex field */
  ACC = Usb_read_byte();
  ((Uchar*)&wLength)[1] = Usb_read_byte();   /* read wLength */
  ((Uchar*)&wLength)[0] = Usb_read_byte();
  if (wLength > data_to_transfer)
  {
    if ((data_to_transfer % EP_CONTROL_LENGTH) == 0) { zlp = TRUE; }
    else { zlp = FALSE; }                        /* no need of zero length packet */
  }
  else
  {
    data_to_transfer = (Uchar)wLength;       /* send only requested number of data */
  }
  Usb_clear_rx_setup() ;                     /* clear the receive setup flag */
  Usb_set_DIR();                            /* set out on EP0 */

  while (data_to_transfer > EP_CONTROL_LENGTH)
  {
    pbuffer = usb_send_ep0_packet(pbuffer, EP_CONTROL_LENGTH);
    data_to_transfer -= EP_CONTROL_LENGTH;

    while ((!(Usb_rx_complete())) && (!(Usb_tx_complete())));
    Usb_clear_tx_complete();
    if ((Usb_rx_complete()))                /* if cancel from USB Host */
    {
      Usb_clear_tx_ready();
      Usb_clear_rx();
      return;
    }
  }
  /* send last data packet */
  pbuffer = usb_send_ep0_packet(pbuffer, data_to_transfer);
  data_to_transfer = 0;
  while ((!(Usb_rx_complete())) && (!(Usb_tx_complete())));
  Usb_clear_tx_complete();
  if ((Usb_rx_complete()))                  /* if cancel from USB Host */
  {
    Usb_clear_tx_ready();
    Usb_clear_rx();
    return;
  }

  if (zlp == TRUE)
  {
    usb_send_ep0_packet(pbuffer, 0);
    while ((!(Usb_rx_complete())) && (!(Usb_tx_complete())));
    Usb_clear_tx_complete();
    if ((Usb_rx_complete()))              /* if cancel from USB Host */
    {
      Usb_clear_tx_ready();
      Usb_clear_rx();
      return;
    }

  }
  while ((!(Usb_rx_complete())) && (!(Usb_setup_received())));
  if (Usb_setup_received())
  {
    return;
  }

  if (Usb_rx_complete())
  {
    Usb_clear_DIR();                        /* set in on EP0 */
    Usb_clear_rx();
  }
}


/*F**************************************************************************
* NAME: usb_get_configuration
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the GET_CONFIGURATION request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_get_configuration (void)
{
  Usb_clear_rx_setup();
  Usb_set_DIR();

/*  if (Usb_get_usb_configured()) { Usb_write_byte(1); }
  else { Usb_write_byte(0); }
*/
  Usb_write_byte(usb_configuration_nb);

  Usb_set_tx_ready();
  while (!(Usb_tx_complete()));
  Usb_clear_tx_complete();
  while (!(Usb_rx_complete()));
  Usb_clear_rx();
  Usb_clear_DIR();
}

/*F**************************************************************************
* NAME: usb_get_interface
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the GET_INTERFACE request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_get_interface (void)
{
  Usb_clear_rx_setup();
  Usb_set_DIR();
  Usb_set_stall_request();
  while (!Usb_stall_sent());
  Usb_clear_stall_request();
  Usb_clear_stalled();
  Usb_clear_DIR();
}


/*F**************************************************************************
* NAME: usb_get_status
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the GET_STATUS request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_get_status (void)
{
Uchar wIndex;

  ACC = Usb_read_byte();                    /* dummy read */
  ACC = Usb_read_byte();                    /* dummy read */
  wIndex = Usb_read_byte();
  Usb_clear_rx_setup();
  Usb_set_DIR();
  switch(bmRequestType) 
  {
    case REQUEST_DEVICE_STATUS:    Usb_write_byte(SELF_POWERED);  break;
    
    case REQUEST_INTERFACE_STATUS: Usb_write_byte(0x00);          break;
    
    case REQUEST_ENDPOINT_STATUS:  wIndex = wIndex & MSK_EP_DIR;
                                   Usb_write_byte(endpoint_status[wIndex]);
                                   break;
  }
  Usb_write_byte(0x00);

  Usb_set_tx_ready();
  while ((!(Usb_tx_complete())) || (Usb_setup_received()));
  Usb_clear_tx_complete();
  while ((!(Usb_rx_complete())) || (Usb_setup_received()));
  Usb_clear_rx();
  Usb_clear_DIR();
}


/*F**************************************************************************
* NAME: usb_set_feature
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the SET_FEATURE request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_set_feature (void)
{
  if (bmRequestType == ZERO_TYPE)
  {
    Usb_clear_rx_setup();
    Usb_set_stall_request();
    while (!(Usb_stall_sent()));
    Usb_clear_stall_request();
  }
  if (bmRequestType == INTERFACE_TYPE)
  {
    Usb_clear_rx_setup();
    Usb_set_stall_request();
    while (!(Usb_stall_sent()));
    Usb_clear_stall_request();
  }
  if (bmRequestType == ENDPOINT_TYPE)
  {
    if (Usb_read_byte() == 0x00)
    {
      ACC = Usb_read_byte();                /* dummy read */
      switch (Usb_read_byte())              /* check wIndex */
      {
        case ENDPOINT_1:
        {
          Usb_select_ep(EP_IN);
          Usb_set_stall_request();
          Usb_select_ep(EP_CONTROL);
          endpoint_status[EP_IN] = 0x01;
          Usb_clear_rx_setup();
          Usb_set_tx_ready();
          while (!(Usb_tx_complete()));
          Usb_clear_tx_complete();
          break;
        }
        default:
        {
          Usb_clear_rx_setup();
          Usb_set_stall_request();
          while (!(Usb_stall_sent()));
          Usb_clear_stall_request();
          Usb_clear_stalled();
          break;
        }
      }
    }
  }
}


/*F**************************************************************************
* NAME: usb_clear_feature
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the SET_FEATURE request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_clear_feature (void)
{
  if (bmRequestType == ZERO_TYPE)
  {
    Usb_clear_rx_setup();
    Usb_set_stall_request();
    while (!(Usb_stall_sent()));
    Usb_clear_stall_request();
  }
  if (bmRequestType == INTERFACE_TYPE)
  {
    Usb_clear_rx_setup();
    Usb_set_stall_request();
    while (!(Usb_stall_sent()));
    Usb_clear_stall_request();
  }
  if (bmRequestType == ENDPOINT_TYPE)
  {
    if (Usb_read_byte() == 0x00)
    {
      ACC = Usb_read_byte();                /* dummy read */
      switch (Usb_read_byte())              /* check wIndex */
      {
        case ENDPOINT_1:
        {
          Usb_select_ep(EP_IN);
          Usb_clear_stall_request();
          usb_reset_endpoint(EP_IN);
          Usb_select_ep(EP_CONTROL);
          endpoint_status[EP_IN] = 0x00;
          Usb_clear_rx_setup();
          Usb_set_tx_ready();
          while (!(Usb_tx_complete()));
          Usb_clear_tx_complete();
          break;
        }
        case ENDPOINT_0:
        {
          Usb_clear_rx_setup();
          Usb_set_tx_ready();
          while (!(Usb_tx_complete()));
          Usb_clear_tx_complete();
          break;
        }
        default:
        {
          Usb_clear_rx_setup();
          Usb_set_stall_request();
          while (!(Usb_stall_sent()));
          Usb_clear_stall_request();
          break;
        }
      }
    }
  }
}
/*F**************************************************************************
* NAME: usb_hid_set_report
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the SET_REPORT request (HID Class)
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_hid_set_report (void)
{
  Usb_clear_rx_setup();
  
  while(!Usb_rx_complete() );
  Usb_clear_rx();
  Usb_set_tx_ready();                          /* send a ZLP for STATUS phase */
  while(!(Usb_tx_complete()));
  Usb_clear_tx_complete();
}



/*F**************************************************************************
* NAME: usb_hid_set_idle
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the HID_SET_IDLE request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_hid_set_idle (void)
{
  ACC = Usb_read_byte();
  hid_idle_duration = Usb_read_byte();      /* wValue contains the duration */
  Usb_clear_rx_setup();

  Usb_set_tx_ready();                          /* send a ZLP for STATUS phase */
  while(!(Usb_tx_complete()));
  Usb_clear_tx_complete();
}

/*F**************************************************************************
* NAME: usb_hid_get_idle
*----------------------------------------------------------------------------
* PARAMS:
*
* return:
*----------------------------------------------------------------------------
* PURPOSE: 
* This function manages the GET_IDLE request.
*----------------------------------------------------------------------------
* EXAMPLE:
*----------------------------------------------------------------------------
* NOTE:
*----------------------------------------------------------------------------
* REQUIREMENTS: 
*****************************************************************************/
void usb_hid_get_idle (void)
{
  Usb_clear_rx_setup();
  Usb_set_DIR();
  Usb_write_byte(hid_idle_duration);
  Usb_set_tx_ready();                          /* send a ZLP for STATUS phase */
  while(!(Usb_tx_complete()));
  Usb_clear_tx_complete();
  
  while (!(Usb_rx_complete()));
  Usb_clear_rx();
  Usb_clear_DIR();
}

/*_____ E N D  O F  F I L E  _________________________________________________*/