⭐ 欢迎来到虫虫下载站！ | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站
📤 上传资源

📄 platform.reg

📁 freescale i.mx31 BSP CE5.0全部源码
💻 REG
📖 第 1 页 / 共 3 页
字号:
🔍
123 
   "IoBase"=dword:43F90000
   "IoLen"=dword:D4
   "Prefix"="COM"
   "Dll"="csp_serial.dll"
   "Index"=dword:1
   "Order"=dword:9
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM1\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
   "FriendlyName"="MX31 COM1 UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF  ; BSP_SERIAL_UART1

IF BSP_SERIAL_UART3
    IF BSP_SERIAL_UART4 !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM2]
   "DeviceArrayIndex"=dword:0
   "IoBase"=dword:5000C000
   "IoLen"=dword:D4
   "Prefix"="COM"
   "Dll"="csp_serial.dll"
   "Index"=dword:2
   "Order"=dword:9
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM2\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
   "FriendlyName"="MX31 COM2 UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
   ENDIF ; !BSP_SERIAL_UART4
ENDIF  ; BSP_SERIAL_UART3

IF BSP_SERIAL_UART4
    IF BSP_SERIAL_UART3 !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM5]
   "DeviceArrayIndex"=dword:0
   "IoBase"=dword:43FB0000
   "IoLen"=dword:D4
   "Prefix"="COM"
   "Dll"="csp_serial.dll"
   "Index"=dword:5
   "Order"=dword:9
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM5\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
   "FriendlyName"="MX31 COM5 UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
   ENDIF ; BSP_SERIAL_UART3
ENDIF  ; BSP_SERIAL_UART4

IF BSP_SERIAL_UART5
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM6]
   "DeviceArrayIndex"=dword:0
   "IoBase"=dword:43FB4000
   "IoLen"=dword:D4
   "Prefix"="COM"
   "Dll"="csp_serial.dll"
   "Index"=dword:6
   "Order"=dword:9
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\COM6\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:0
   "FriendlyName"="MX31 COM6 UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 05,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
ENDIF  ; BSP_SERIAL_UART5
; @CESYSGEN ENDIF CE_MODULES_SERIAL

; @CESYSGEN IF CE_MODULES_IRDASTK && CE_MODULES_SERIAL
IF BSP_SIR_UART2 
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SIR]
   "DeviceArrayIndex"=dword:1
   "IoBase"=dword:43F94000
   "IoLen"=dword:D4
   "Prefix"="COM"
   "Dll"="csp_serial.dll"
   "Index"=dword:4
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SIR\Unimodem]
   "Tsp"="Unimodem.dll"
   "DeviceType"=dword:6
   "FriendlyName"="MX31 SIR UNIMODEM"
   "DevConfig"=hex: 10,00, 00,00, 02,00,00,00, 10,01,00,00, 00,4B,00,00, 00,00, 08, 00, 00, 00,00,00,00
[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
    "Bind"=multi_sz:"Irsir1"
[HKEY_LOCAL_MACHINE\Comm\Irsir]
   "DisplayName"="MX31 SIR Driver"
   "Group"="NDIS"
   "ImagePath"="irsir.dll"
[HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
   "Route"=multi_sz:"Irsir1"
[HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:0
   "Port"=dword:4
   ; 0 = Use external dongle, 1 = Use internal IR
   "IntIR"=dword:0
   ; 0 - internal transceiver, 1 - Extended Systems JetEye dongle.
   "TransceiverType"=dword:1
   "DisablePowerManagement"=dword:1
ENDIF ; BSP_SIR_UART2

; @CESYSGEN ENDIF CE_MODULES_IRDASTK && CE_MODULES_SERIAL

IF BSP_FIR
[HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
    "Bind"=multi_sz:"Irfir1"
[HKEY_LOCAL_MACHINE\Comm\Irfir]
   "DisplayName"="MX31 FIR Driver"
   "Group"="NDIS"
   "ImagePath"="irfir.dll"
[HKEY_LOCAL_MACHINE\Comm\Irfir\Linkage]
   "Route"=multi_sz:"Irfir1"
[HKEY_LOCAL_MACHINE\Comm\Irfir1\Parms]
   "BusNumber"=dword:0
   "BusType"=dword:0
ENDIF ; BSP_FIR


; ADS only has 1 ethernet port, so only can choose either NDIS or Debug driver
; Cs8900a NDIS driver will be included if KITL is not enabled.
IF BSP_ETHER_CS8900
                 IF IMGNOKITL !
                                IF BSP_NOSHAREETH !
[HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
    "Bind"=multi_sz:"VMINI1"
[HKEY_LOCAL_MACHINE\Comm\VMini]
    "DisplayName"="Null Ethernet Miniport Driver"
    "Group"="NDIS"
    "ImagePath"="VMini.dll"
[HKEY_LOCAL_MACHINE\Comm\VMini\Linkage]
    "Route"=multi_sz:"VMINI1"
[HKEY_LOCAL_MACHINE\Comm\VMINI1]
    "DisplayName"="Null Ethernet Miniport Driver"
    "Group"="NDIS"
    "ImagePath"="VMini.dll"
[HKEY_LOCAL_MACHINE\Comm\VMINI1\Parms]
    "BusNumber"=dword:0
    "BusType"=dword:05
    "Interrupt"=dword:05
    "IOAddress"=dword:0300
[HKEY_LOCAL_MACHINE\Comm\VMINI1\Parms\TcpIp]
    "EnableDHCP"=dword:1
    ;This should be MULTI_SZ
    "DefaultGateway"=""
    ;Use zero as the broadcast address (or 255.255.255.255)
    "UseZeroBroadcast"=dword:0
    ;This should be MULTI_SZ, the IP address list
    "IpAddress"="0.0.0.0"
    ;This should be MULTI_SZ, the subnet masks for the IP addresses above
    "Subnetmask"="0.0.0.0"
    ;DHCP will keep retrying
    "DhcpMaxRetry"=dword:ffffffff
    ;INIT delay, RFC2131 recommends 10 seconds
    "DhcpInitDelayInterval"=dword:2710
    ;Number of retries before the dialogue box comes up
    "DhcpRetryDialogue"=dword:ffffffff
[HKEY_LOCAL_MACHINE\Comm\VMINI1\Parms]
    "DefaultGateway"=dword:1
    "DefaultLineStatus"=dword:1
                                ENDIF ;BSP_NOSHAREETH !
                 ELSE
                               #include "$(_TARGETPLATROOT)\src\drivers\cs8900\ends4isa.reg"
                 ENDIF ;IMGNOKITL
ENDIF ;BSP_ETHER_CS8900


IF BSP_NOAUDIO !
; @CESYSGEN IF CE_MODULES_WAVEAPI

IF BSP_PMIC_MC13783
IF BSP_AUDIO_MC13783
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio]
   "Prefix"="WAV"
   "Dll"="wavedev_mc13783.dll"
   "Index"=dword:1
   "Order"=dword:10
   ; publish mixer interface
   "IClass"=multi_sz:"{37168569-61C4-45fd-BD54-9442C7DBA46F}"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\Playback]
   "LeftChannel"=dword:40
   "RightChannel"=dword:80
   "Description"="Stereo headset jack J8 (LeftChannel=0x40, RightChannel=0x80)"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\Recording]
   "LeftChannel"=dword:1
   "RightChannel"=dword:2
   "Description"="Stereo input jack J4 (LeftChannel=1, RightChannel=2)"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\MicBias1]
   "Enable"=dword:0
   "Description"="Microphone bias circuit 1 disabled (0) or enabled (1)"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\MicBias2]
   "Enable"=dword:1
   "Description"="Microphone bias circuit 2 disabled (0) or enabled (1)"

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\InputAmp]
   "Mode"=dword:1
   "Mode Description"="Voltage-to-Voltage (1) or Current-to-Voltage (2)"
   "Gain"=dword:8
   "Gain Description"="-8 dB (0) to 23 dB (31 or 0x1F) in 1 dB steps."

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio\PMIC\Config\HeadsetDetect]
   "Enable"=dword:0
   "Description"="Disabled (0) or enabled (1)"

ELSE IF PLAT_PMC
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio]
   "Prefix"="WAV"
   "Dll"="dummywav.dll"
   "Index"=dword:1
   "Order"=dword:10
   ; publish mixer interface
   "IClass"=multi_sz:"{37168569-61C4-45fd-BD54-9442C7DBA46F}"
ENDIF
ENDIF

; Override wave API load order to follow audio driver
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WAPIMAN]
   "Order"=dword:11
   
; @CESYSGEN ENDIF CE_MODULES_WAVEAPI
ENDIF BSP_NOAUDIO !

;
; Notification LED
;
IF BSP_NONLED !
; @CESYSGEN IF CE_MODULES_NLEDDRVR
#include "$(_TARGETPLATROOT)\SRC\DRIVERS\NLEDDRVR\nleddrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_NLEDDRVR
ENDIF

; NOR FMD driver
; HIVE BOOT SECTION
IF BSP_NOR_FMD
#include "$(_TARGETPLATROOT)\SRC\DRIVERS\BLOCK\NORFMD\DLL\norfmd.reg"
ENDIF
; END HIVE BOOT SECTION

IF BSP_TCLED
[HKEY_LOCAL_MACHINE\Drivers\TCL]
   "Prefix"="TCL"
IF BSP_PMIC_MC13783
   "Dll"="tcled_mc13783.dll"
ENDIF
   "Index"=dword:1
ENDIF


; @CESYSGEN IF CE_MODULES_SCARD
[HKEY_LOCAL_MACHINE\Services\SmartCardDriver]
    "Start"=dword:2
    "Type"=dword:1
    "Group"="Smart Card Reader"
    "ErrorControl"=dword:1

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SmartCard]
    "Prefix"="SCA"
    "Dll"="scard.dll"
    "Index"=dword:1
    "Order"=dword:10

IF BSP_SMARTCARD_SIM0
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SIM]
    "Prefix"="SCR"
    "Dll"="sim.dll"
    "Index"=dword:1
    "Order"=dword:11
    "IOBase"=dword:50018000
    "AlternateIOBase"=dword:0
ENDIF   ;BSP_SMARTCARD_SIM0

IF BSP_SMARTCARD_SIM1
IF BSP_SMARTCARD_SIM0!
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\SIM]
    "Prefix"="SCR"
    "Dll"="sim.dll"
    "Index"=dword:2
    "Order"=dword:11
    "IOBase"=dword:50018000
    "AlternateIOBase"=dword:0
ENDIF;  BSP_SMARTCARD_SIM0!
ENDIF;  BSP_SMARTCARD_SIM1
; @CESYSGEN ENDIF CE_MODULES_SCARD

IF BSP_USB
IF BSP_USB_HSOTG_XVC
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\XVC]
    "Dll" = "imx_xvc.Dll"
    "Prefix" = "XVC"
    "Order" = dword:25
    "MemBase"=dword:43F88000
    "MemLen"=dword:00001000
    "Irq"= dword:25
    "FriendlyName" = "XVC Driver"
; @CESYSGEN IF CE_MODULES_USBHOST
    "OTGSupport" = dword:1
; @CESYSGEN ELSE
    "OTGSupport" = dword:0
; @CESYSGEN ENDIF CE_MODULES_USBHOST
    "OTGGroup"="01"
ENDIF; BSP_USB_HSOTG_XVC

IF BSP_USB_HSOTG_CLIENT
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UFN]
    "Prefix"="UFN"
    "Dll"="usbfn.dll"
    "Index"=dword:1
    "Order"=dword:20
    "MemBase"=dword:43F88000
    "MemLen"=dword:00001000
    "Irq"=dword:25
IF BSP_USB_HSOTG_XVC
; @CESYSGEN IF CE_MODULES_USBHOST
    "OTGSupport" = dword:1
; @CESYSGEN ELSE
    "OTGSupport" = dword:0
; @CESYSGEN ENDIF CE_MODULES_USBHOST
ELSE
    "OTGSupport" = dword:0
ENDIF ; BSP_USB_HSOTG_XVC
    "OTGGroup"="01"
    "BusIoctl"=dword:2a0048
    "IClass"= multi_sz:"{E2BDC372-598F-4619-BC50-54B3F7848D35}=%b","{6F40791D-300E-44E4-BC38-E0E63CA8375C}=%b"
ENDIF ; BSP_USB_HSOTG_CLIENT

;Active Sync over USB Settings

[HKEY_CURRENT_USER\ControlPanel\Comm]
"Cnct"="USB"
"AutoCnct"=dword:00000001

[HKEY_CURRENT_USER]

[HKEY_CURRENT_USER\Comm]

[HKEY_CURRENT_USER\Comm\RasBook]

[HKEY_CURRENT_USER\Comm\RasBook\USB]
"DevCfg"=hex:\
      30,00,00,00,78,00,00,00,00,01,00,00,00,c2,01,00,00,00,08,00,00,00,00,00,00,\
123

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -