📄 cs8900a.h.svn-base
字号:
#ifndef CS8900A_H
#define CS8900A_H
#include "board.h"
#define RTdata REGW(CS8900_BASE, 0x00)/*rw*/
#define TxCMD REGW(CS8900_BASE, 0x04)/*wo*/
#define TxLength REGW(CS8900_BASE, 0x06)/*wo*/
#define ISQ REGW(CS8900_BASE, 0x08)/*ro*/
#define PPP REGW(CS8900_BASE, 0x0a)/*rw*/
#define PPdata REGW(CS8900_BASE, 0x0c)/*rw*/
/**** Transmit Configuration ****/
#define PP_TxCFG 0x0106
#define TxCFG_Loss_of_CRSiE (1<<6)
#define TxCFG_SQErroriE (1<<7)
#define TxCFG_TxOKiE (1<<8)
#define TxCFG_Out_of_windowiE (1<<9)
#define TxCFG_JabberiE (1<<10)
#define TxCFG_AnycolliE (1<<11)
#define TxCFG_T16colliE (1<<15)
/**** Transmit event ****/
#define PP_TxEvent 0x0128
#define TxEvent_Loss_of_CRS (1<<6)
#define TxEvent_SQEerror (1<<7)
#define TxEvent_TxOK (1<<8)
#define TxEvent_Out_of_window (1<<9)
#define TxEvent_Jabber (1<<10)
#define TxEvent_NumCollisions (0xf<<11)
#define TxEvent_T16Collisions (1<<15)
/***** Transmit Command Request****/
#define PP_TxCmd_Req 0x0144
/**** Transmit Command Status ****/
#define PP_TxCMD_Sta 0x0108
#define TxStart_After5 0x0
#define TxStart_After381 (1<<6)
#define TxStart_After1021 (1<<7)
#define TxStart_All (3<<6)
#define TxCMD_Force (1<<8)
#define TxCMD_Onecoll (1<<9)
#define TxCMD_InhibitCRC (1<<12)
#define TxCMD_TxpadDis (1<<13)
/**** Buffer Configuration ****/
#define PP_BufCFG 0x010A
#define BufCFG_SWint_X (1<<6)
#define BufCFG_RxDMAiE (1<<7)
#define BufCFG_Rdy4TxiE (1<<8)
#define BufCFG_TxUnderruniE (1<<9)
#define BufCFG_RxMissiE (1<<10)
#define BufCFG_Rx128iE (1<<11)
#define BufCFG_TxColOvfiE (1<<12)
#define BufCFG_MissOvfloiE (1<<13)
#define BufCFG_RxDestiE (1<<15)
/**** Buffer event ****/
#define PP_BufEvent 0x012C
#define BufEvent_SWint (1<<6)
#define BufEvent_RxDMAFrame (1<<7)
#define BufEvent_Rdy4Tx (1<<8)
#define BufEvent_TxUnderrun (1<<9)
#define BufEvent_RxMiss (1<<10)
#define BufEvent_Rx128 (1<<11)
#define BufEvent_RxDest (1<<15)
/**** Line Control ****/
#define PP_LineCTL 0x0112
#define LineCTL_SerRxON (1<<6)
#define LineCTL_SerTxON (1<<7)
#define LineCTL_AUIonly (1<<8)
#define LineCTL_AutoAUI_10BT (1<<9)
#define LineCTL_ModBackoffE (1<<11)
#define LineCTL_PolarityDis (1<<12)
#define LineCTL_L2_partDefDis (1<<13)
#define LineCTL_LoRxSquelch (1<<14)
/**** Receiver configuration ****/
#define PP_RxCFG 0x0102
#define RxCFG_Skip_1 (1<<6)
#define RxCFG_StreamE (1<<7)
#define RxCFG_RxOKiE (1<<8)
#define RxCFG_RxDMAonly (1<<9)
#define RxCFG_AutoRxDMAE (1<<10)
#define RxCFG_BufferCRC (1<<11)
#define RxCFG_CRCerroriE (1<<12)
#define RxCFG_RuntiE (1<<13)
#define RxCFG_ExtradataiE (1<<14)
/**** Receiver Control ****/
#define PP_RxCTL 0x0104
#define RxCTL_IAHashA (1<<6)
#define RxCTL_PromiscuousA (1<<7)
#define RxCTL_RxOKA (1<<8)
#define RxCTL_MulticastA (1<<9)
#define RxCTL_IndividualA (1<<10)
#define RxCTL_BroadcastA (1<<11)
#define RxCTL_CRCerrorA (1<<12)
#define RxCTL_RuntA (1<<13)
#define RxCTL_ExtradataA (1<<14)
/****Receive Event****/
#define RxEvent 0x0124
#define IAHash (1<<6)
#define Dribbblebits (1<<7)
#define RxOK (1<< 8)
#define Hashed (1<< 9)
#define IndividualAdr (1<<1)
#define Broadcast (1<<11)
#define CRCerror (1<<12)
#define Runt (1<<13)
#define Extradata (1<<14)
/**** Bus status ****/
#define PP_BusST 0x0138
#define BusST_TxBidErr (1<<7)
#define BusST_Rdy4Tx (1<<8)
/**** Bus Control ****/
#define PP_BusCTL 0x0116
#define BusCTL_ResetRxDMA (1<<6)
#define BusCTL_DMAextend (1<<8)
#define BusCTL_UseSA (1<<9)
#define BusCTL_MemoryE (1<<10)
#define BusCTL_DMABurst (1<<11)
#define BusCTL_IOCHRDYE (1<<12)
#define BusCTL_RxDMAsize (1<<13)
#define BusCTL_EnableRQ (1<<15)
/**** Chip self status ****/
#define PP_SelfSTAT 0x0136
#define SelfST_T3VActive (1<<6)
#define SelfST_INITD (1<<7)
#define SelfST_SIBUSY (1<<8)
#define SelfST_EEPROMpresent (1<<9)
#define SelfST_EEPROMOK (1<<10)
#define SelfST_ELpresent (1<<11)
#define SelfST_EEsize (1<<12)
/**** Self Control ****/
#define PP_SelfCTL 0x0114
#define SelfCTL_RESET (1<<6)
#define SelfCTL_SWSuspend (1<<8)
#define SelfCTL_HWSleepE (1<<9)
#define SelfCTL_HWStandbyE (1<<10)
#define SelfCTL_HC0E (1<<12)
#define SelfCTL_HC1E (1<<13)
#define SelfCTL_HCB0 (1<<14)
#define SelfCTL_HCB1 (1<<15)
/***** Receive event ****/
#define PP_RER 0x0124
#define RER_IAHash (1<<6)
#define RER_Dribble (1<<7)
#define RER_RxOK (1<<8)
#define RER_Hashed (1<<9)
#define RER_IA (1<<10)
#define RER_Broadcast (1<<11)
#define RER_CRC (1<<12)
#define RER_RUNT (1<<13)
#define RER_EXTRA (1<<14)
/***** Interrupt Status Queue ****/
#define PP_ISQ 0x0120
#define ISQ_RxEvent 0x04
#define ISQ_TxEvent 0x08
#define ISQ_BufEvent 0x0C
#define ISQ_RxMissEvent 0x10
#define ISQ_TxColEvent 0x12
#define ISQ_EventMask 0x3F
/***** Line Status ****/
#define PP_LineST 0x0134
#define LineST_LinkOK (1<<7)
#define LineST_AUI (1<<8)
#define LineST_10BT (1<<9)
#define LineST_PolarityOK (1<<12)
#define LineST_CRS (1<<14)
/***** Test control ****/
#define PP_TestCTL 0x0118
#define TestCTL_DisableLT (1<<7)
#define TestCTL_ENDECloop (1<<9)
#define TestCTL_AUIloop (1<<10)
#define TestCTL_DisBackoff (1<<11)
#define TestCTL_FDX (1<<15)
/***** Interrupt Number ****/
#define PP_IntRegNum 0x0022
#define IntRegNum_INTRQ0 0x0000
#define IntRegNum_INTRQ1 0x0001
#define IntRegNum_INTRQ2 0x0002
#define IntRegNum_INTRQ3 0x0003
/***** Product Identification Code ******/
#define PP_ChipID 0x0000
#define PP_ChipRev 0x0002
//***** I/O Base Address *****/
#define PP_IOBASE 0x0020
/***** Receiver miss counter *****/
#define PP_RxMiss 0x0130
/***** AUI Time Domain Reflectometer *****/
#define PP_TDR 0x013C
/***** Tx Length *****/
#define PP_TxLength 0x0146
/***** Logical address filter *****/
#define PP_LAF 0x0150
/***** Individual address (MAC) *****/
#define PP_IA 0x0158
/******Transmit Collision Counter****/
#define PP_TxCOL 0x0132
/*******Receive Frame Byte Counter*****/
#define FrameBCounter 0x0050
#endif //CS8900A_H⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -