at91sam9260.tcl

来自「最新版IAR FOR ARM（EWARM）5.11中的代码例子」· TCL 代码 · 共 1,163 行 · 第 1/5 页

set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x68) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x6c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]
# -------- SMC_SETUP : (SMC Offset: 0x70) Setup Register for CS x -------- 
set AT91C_SMC_NWESETUP    [expr 0x3F <<  0 ]
set AT91C_SMC_NCSSETUPWR  [expr 0x3F <<  8 ]
set AT91C_SMC_NRDSETUP    [expr 0x3F << 16 ]
set AT91C_SMC_NCSSETUPRD  [expr 0x3F << 24 ]
# -------- SMC_PULSE : (SMC Offset: 0x74) Pulse Register for CS x -------- 
set AT91C_SMC_NWEPULSE    [expr 0x7F <<  0 ]
set AT91C_SMC_NCSPULSEWR  [expr 0x7F <<  8 ]
set AT91C_SMC_NRDPULSE    [expr 0x7F << 16 ]
set AT91C_SMC_NCSPULSERD  [expr 0x7F << 24 ]
# -------- SMC_CYC : (SMC Offset: 0x78) Cycle Register for CS x -------- 
set AT91C_SMC_NWECYCLE    [expr 0x1FF <<  0 ]
set AT91C_SMC_NRDCYCLE    [expr 0x1FF << 16 ]
# -------- SMC_CTRL : (SMC Offset: 0x7c) Control Register for CS x -------- 
set AT91C_SMC_READMODE    [expr 0x1 <<  0 ]
set AT91C_SMC_WRITEMODE   [expr 0x1 <<  1 ]
set AT91C_SMC_NWAITM      [expr 0x3 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_DISABLE        [expr 0x0 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_FROZEN  [expr 0x2 <<  5 ]
set 	AT91C_SMC_NWAITM_NWAIT_ENABLE_READY   [expr 0x3 <<  5 ]
set AT91C_SMC_BAT         [expr 0x1 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_SELECT          [expr 0x0 <<  8 ]
set 	AT91C_SMC_BAT_BYTE_WRITE           [expr 0x1 <<  8 ]
set AT91C_SMC_DBW         [expr 0x3 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_EIGTH_BITS     [expr 0x0 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS   [expr 0x1 << 12 ]
set 	AT91C_SMC_DBW_WIDTH_THIRTY_TWO_BITS [expr 0x2 << 12 ]
set AT91C_SMC_TDF         [expr 0xF << 16 ]
set AT91C_SMC_TDFEN       [expr 0x1 << 20 ]
set AT91C_SMC_PMEN        [expr 0x1 << 24 ]
set AT91C_SMC_PS          [expr 0x3 << 28 ]
set 	AT91C_SMC_PS_SIZE_FOUR_BYTES      [expr 0x0 << 28 ]
set 	AT91C_SMC_PS_SIZE_EIGHT_BYTES     [expr 0x1 << 28 ]
set 	AT91C_SMC_PS_SIZE_SIXTEEN_BYTES   [expr 0x2 << 28 ]
set 	AT91C_SMC_PS_SIZE_THIRTY_TWO_BYTES [expr 0x3 << 28 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR AHB Matrix Interface
# *****************************************************************************
# -------- MATRIX_SCFG0 : (MATRIX Offset: 0x40) Slave Configuration Register 0 -------- 
set AT91C_MATRIX_SLOT_CYCLE [expr 0xFF <<  0 ]
set AT91C_MATRIX_DEFMSTR_TYPE [expr 0x3 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           [expr 0x0 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         [expr 0x1 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        [expr 0x2 << 16 ]
set AT91C_MATRIX_FIXED_DEFMSTR0 [expr 0x7 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR0_ARM926I              [expr 0x0 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR0_ARM926D              [expr 0x1 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR0_HPDC3                [expr 0x2 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR0_LCDC                 [expr 0x3 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR0_DMA                  [expr 0x4 << 18 ]
# -------- MATRIX_SCFG1 : (MATRIX Offset: 0x44) Slave Configuration Register 1 -------- 
set AT91C_MATRIX_SLOT_CYCLE [expr 0xFF <<  0 ]
set AT91C_MATRIX_DEFMSTR_TYPE [expr 0x3 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           [expr 0x0 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         [expr 0x1 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        [expr 0x2 << 16 ]
set AT91C_MATRIX_FIXED_DEFMSTR1 [expr 0x7 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR1_ARM926I              [expr 0x0 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR1_ARM926D              [expr 0x1 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR1_HPDC3                [expr 0x2 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR1_LCDC                 [expr 0x3 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR1_DMA                  [expr 0x4 << 18 ]
# -------- MATRIX_SCFG2 : (MATRIX Offset: 0x48) Slave Configuration Register 2 -------- 
set AT91C_MATRIX_SLOT_CYCLE [expr 0xFF <<  0 ]
set AT91C_MATRIX_DEFMSTR_TYPE [expr 0x3 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           [expr 0x0 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         [expr 0x1 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        [expr 0x2 << 16 ]
set AT91C_MATRIX_FIXED_DEFMSTR2 [expr 0x1 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR2_ARM926I              [expr 0x0 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR2_ARM926D              [expr 0x1 << 18 ]
# -------- MATRIX_SCFG3 : (MATRIX Offset: 0x4c) Slave Configuration Register 3 -------- 
set AT91C_MATRIX_SLOT_CYCLE [expr 0xFF <<  0 ]
set AT91C_MATRIX_DEFMSTR_TYPE [expr 0x3 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           [expr 0x0 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         [expr 0x1 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        [expr 0x2 << 16 ]
set AT91C_MATRIX_FIXED_DEFMSTR3 [expr 0x7 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR3_ARM926I              [expr 0x0 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR3_ARM926D              [expr 0x1 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR3_HPDC3                [expr 0x2 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR3_LCDC                 [expr 0x3 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR3_DMA                  [expr 0x4 << 18 ]
# -------- MATRIX_SCFG4 : (MATRIX Offset: 0x50) Slave Configuration Register 4 -------- 
set AT91C_MATRIX_SLOT_CYCLE [expr 0xFF <<  0 ]
set AT91C_MATRIX_DEFMSTR_TYPE [expr 0x3 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_NO_DEFMSTR           [expr 0x0 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_LAST_DEFMSTR         [expr 0x1 << 16 ]
set 	AT91C_MATRIX_DEFMSTR_TYPE_FIXED_DEFMSTR        [expr 0x2 << 16 ]
set AT91C_MATRIX_FIXED_DEFMSTR4 [expr 0x3 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR4_ARM926I              [expr 0x0 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR4_ARM926D              [expr 0x1 << 18 ]
set 	AT91C_MATRIX_FIXED_DEFMSTR4_HPDC3                [expr 0x2 << 18 ]
# -------- MATRIX_MRCR : (MATRIX Offset: 0x100) MRCR Register -------- 
set AT91C_MATRIX_RCA926I  [expr 0x1 <<  0 ]
set AT91C_MATRIX_RCA926D  [expr 0x1 <<  1 ]
# -------- MATRIX_EBI : (MATRIX Offset: 0x11c) EBI (Slave 3) Special Function Register -------- 
set AT91C_MATRIX_CS1A     [expr 0x1 <<  1 ]
set 	AT91C_MATRIX_CS1A_SMC                  [expr 0x0 <<  1 ]
set 	AT91C_MATRIX_CS1A_SDRAMC               [expr 0x1 <<  1 ]
set AT91C_MATRIX_CS3A     [expr 0x1 <<  3 ]
set 	AT91C_MATRIX_CS3A_SMC                  [expr 0x0 <<  3 ]
set 	AT91C_MATRIX_CS3A_SM                   [expr 0x1 <<  3 ]
set AT91C_MATRIX_CS4A     [expr 0x1 <<  4 ]
set 	AT91C_MATRIX_CS4A_SMC                  [expr 0x0 <<  4 ]
set 	AT91C_MATRIX_CS4A_CF                   [expr 0x1 <<  4 ]
set AT91C_MATRIX_CS5A     [expr 0x1 <<  5 ]
set 	AT91C_MATRIX_CS5A_SMC                  [expr 0x0 <<  5 ]
set 	AT91C_MATRIX_CS5A_CF                   [expr 0x1 <<  5 ]
set AT91C_MATRIX_DBPUC    [expr 0x1 <<  8 ]
# -------- MATRIX_TEAKCFG : (MATRIX Offset: 0x12c) Slave 7 Special Function Register -------- 
set AT91C_TEAK_PROGRAM_ACCESS [expr 0x1 <<  0 ]
set 	AT91C_TEAK_PROGRAM_ACCESS_DISABLED             0x0
set 	AT91C_TEAK_PROGRAM_ACCESS_ENABLED              0x1
set AT91C_TEAK_BOOT       [expr 0x1 <<  1 ]
set 	AT91C_TEAK_BOOT_DISABLED             [expr 0x0 <<  1 ]
set 	AT91C_TEAK_BOOT_ENABLED              [expr 0x1 <<  1 ]
set AT91C_TEAK_NRESET     [expr 0x1 <<  2 ]
set 	AT91C_TEAK_NRESET_ENABLED              [expr 0x0 <<  2 ]
set 	AT91C_TEAK_NRESET_DISABLED             [expr 0x1 <<  2 ]
set AT91C_TEAK_LVECTORP   [expr 0x3FFFF << 14 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Chip Configuration Registers
# *****************************************************************************
# -------- CCFG_EBICSA : (CCFG Offset: 0xc) EBI Chip Select Assignement Register -------- 
set AT91C_EBI_CS1A        [expr 0x1 <<  1 ]
set 	AT91C_EBI_CS1A_SMC                  [expr 0x0 <<  1 ]
set 	AT91C_EBI_CS1A_SDRAMC               [expr 0x1 <<  1 ]
set AT91C_EBI_CS3A        [expr 0x1 <<  3 ]
set 	AT91C_EBI_CS3A_SMC                  [expr 0x0 <<  3 ]
set 	AT91C_EBI_CS3A_SM                   [expr 0x1 <<  3 ]
set AT91C_EBI_CS4A        [expr 0x1 <<  4 ]
set 	AT91C_EBI_CS4A_SMC                  [expr 0x0 <<  4 ]
set 	AT91C_EBI_CS4A_CF                   [expr 0x1 <<  4 ]
set AT91C_EBI_CS5A        [expr 0x1 <<  5 ]
set 	AT91C_EBI_CS5A_SMC                  [expr 0x0 <<  5 ]
set 	AT91C_EBI_CS5A_CF                   [expr 0x1 <<  5 ]
set AT91C_EBI_DBPUC       [expr 0x1 <<  8 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Peripheral DMA Controller
# *****************************************************************************
# -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- 
set AT91C_PDC_RXTEN       [expr 0x1 <<  0 ]
set AT91C_PDC_RXTDIS      [expr 0x1 <<  1 ]
set AT91C_PDC_TXTEN       [expr 0x1 <<  8 ]
set AT91C_PDC_TXTDIS      [expr 0x1 <<  9 ]
# -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- 
set AT91C_PDC_RXTEN       [expr 0x1 <<  0 ]
set AT91C_PDC_TXTEN       [expr 0x1 <<  8 ]

# *****************************************************************************
#              SOFTWARE API DEFINITION  FOR Debug Unit
# *****************************************************************************
# -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- 
set AT91C_US_RSTRX        [expr 0x1 <<  2 ]
set AT91C_US_RSTTX        [expr 0x1 <<  3 ]
set AT91C_US_RXEN         [expr 0x1 <<  4 ]
set AT91C_US_RXDIS        [expr 0x1 <<  5 ]
set AT91C_US_TXEN         [expr 0x1 <<  6 ]
set AT91C_US_TXDIS        [expr 0x1 <<  7 ]
set AT91C_US_RSTSTA       [expr 0x1 <<  8 ]
# -------- DBGU_MR : (DBGU Offset: 0x4) Debug Unit Mode Register -------- 
set AT91C_US_PAR          [expr 0x7 <<  9 ]
set 	AT91C_US_PAR_EVEN                 [expr 0x0 <<  9 ]
set 	AT91C_US_PAR_ODD                  [expr 0x1 <<  9 ]
set 	AT91C_US_PAR_SPACE                [expr 0x2 <<  9 ]
set 	AT91C_US_PAR_MARK                 [expr 0x3 <<  9 ]
set 	AT91C_US_PAR_NONE                 [expr 0x4 <<  9 ]
set 	AT91C_US_PAR_MULTI_DROP           [expr 0x6 <<  9 ]
set AT91C_US_CHMODE       [expr 0x3 << 14 ]
set 	AT91C_US_CHMODE_NORMAL               [expr 0x0 << 14 ]
set 	AT91C_US_CHMODE_AUTO                 [expr 0x1 << 14 ]
set 	AT91C_US_CHMODE_LOCAL                [expr 0x2 << 14 ]
set 	AT91C_US_CHMODE_REMOTE               [expr 0x3 << 14 ]
# -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- 
set AT91C_US_RXRDY        [expr 0x1 <<  0 ]
set AT91C_US_TXRDY        [expr 0x1 <<  1 ]
set AT91C_US_ENDRX        [expr 0x1 <<  3 ]
set AT91C_US_ENDTX        [expr 0x1 <<  4 ]
set AT91C_US_OVRE         [expr 0x1 <<  5 ]
set AT91C_US_FRAME        [expr 0x1 <<  6 ]
set AT91C_US_PARE         [expr 0x1 <<  7 ]
set AT91C_US_TXEMPTY      [expr 0x1 <<  9 ]
set AT91C_US_TXBUFE       [expr 0x1 << 11 ]
set AT91C_US_RXBUFF       [expr 0x1 << 12 ]
set AT91C_US_COMM_TX      [expr 0x1 << 30 ]
set AT91C_US_COMM_RX      [expr 0x1 << 31 ]
# -------- DBGU_IDR : (DBGU Offset: 0xc) Debug Unit Interrupt Disable Register -------- 
set AT91C_US_RXRDY        [expr 0x1 <<  0 ]
set AT91C_US_TXRDY        [expr 0x1 <<  1 ]
set AT91C_US_ENDRX        [expr 0x1 <<  3 ]
set AT91C_US_ENDTX        [expr 0x1 <<  4 ]
set AT91C_US_OVRE         [expr 0x1 <<  5 ]
set AT91C_US_FRAME        [expr 0x1 <<  6 ]
set AT91C_US_PARE         [expr 0x1 <<  7 ]
set AT91C_US_TXEMPTY      [expr 0x1 <<  9 ]
set AT91C_US_TXBUFE       [expr 0x1 << 11 ]
set AT91C_US_RXBUFF       [expr 0x1 << 12 ]
set AT91C_US_COMM_TX      [expr 0x1 << 30 ]
set AT91C_US_COMM_RX      [expr 0x1 << 31 ]
# -------- DBGU_IMR : (DBGU Offset: 0x10) Debug Unit Interrupt Mask Register --------