main.c

LT-1B msp430 程序原理图集合

//******************************************************************************
//  MSP-FET430P140 Demo - Basic Clock, LPM3 Using WDT ISR, 32kHz ACLK
//
//  Description: This program operates MSP430 normally in LPM3, pulsing P3.4
//  at 4 second intervals. WDT ISR used to wake-up system. All I/O configured
//  as low outputs to eliminate floating inputs. Current consumption does
//  increase when LED is powered on P3.4. Demo for measuring LPM3 current.
//  ACLK= LFXT1/4= 32768/4, MCLK= SMCLK= default DCO
//  //* External watch crystal on XIN XOUT is required for ACLK *//	
//
//
//           MSP430F149
//         ---------------
//     /|\|            XIN|-
//      | |               | 32kHz
//      --|RST        XOUT|-
//        |               |
//        |           P3.5|-->LED
//
//  Dasheng
//  LiTian Electronic Inc.
//  Feb 2008
//  Built with IAR Embedded Workbench Version: 3.42A
//******************************************************************************

#include  <msp430x14x.h>
#include  "BoardConfig.h"

void main(void)
{
  BoardConfig(0xb8);
  BCSCTL1 |= DIVA_2;                        // ACLK/4
  WDTCTL = WDT_ADLY_1000;                   // WDT 1s/4 interval timer
  IE1 |= WDTIE;                             // Enable WDT interrupt

  P1DIR = 0xFF;                             // All P1.x outputs
  P1OUT = 0;                                // All P1.x reset
  P2DIR = 0xFF;                             // All P2.x outputs
  P2OUT = 0;                                // All P2.x reset
  P3DIR = 0xFF;                             // All P3.x outputs
  P3OUT = 0x30;                             // All P3.x reset
  P4DIR = 0xFF;                             // All P4.x outputs
  P4OUT = 0;                                // All P4.x reset
  P5DIR = 0xFF;                             // All P5.x outputs
  P5OUT = 0;                                // All P5.x reset
  P6DIR = 0xFF;                             // All P6.x outputs
  P6OUT = 0x80;                             // All P6.x reset

  while(1)
  {
    uint i;
    LPM3;               // Enter LPM3
    P3OUT &= ~BIT5;                          // Set P3.5 LED on
    for (i = 18000; i>0; i--);               // Delay
    P3OUT |= BIT5;                         // Clear P3.5 LED off
  }
}

#pragma vector=WDT_VECTOR
__interrupt void watchdog_timer (void)
{
    LPM3_EXIT;                 // Clear LPM3 bits from 0(SR)
}