📄 zdbwnl.c

📁 万年历+温度+闹钟.dan单片机应用上的一些小代码。
💻 C
📖 第 1 页 / 共 3 页
字号:
12 3 下一页
/******************************************************************************/
/*  Name:  LCD12864(KS0108+KS0107)+DS1302+DS18B20+S52                         */
/*                                                                            */
/*  Designed by : 李 海 群                                                    */
/*                                                                            */
/*  http://www.mculover.net                                                   */   
/*  http://www.mculover.net/whoami                Date : 2005/12/13           */
/******************************************************************************/
#include <reg51.h>

sbit Bell_Out  = P3 ^ 7;//闹钟管脚输出。低电平有效
sbit Bak_Light = P2 ^ 0;//LCD背光控制，低电平有效 

sbit DQ        = P3 ^ 5;//ds1820data
sbit clock_clk = P1 ^ 3;//ds1302_clk
sbit clock_dat = P1 ^ 4;//ds1302_dat
sbit clock_Rst = P1 ^ 5;//ds1302_Rst

#define Disp_On     0x3f //定义12864管脚的指令值
#define Disp_Off    0x3e
#define Col_Add     0x40
#define Page_Add    0xb8
#define Start_Line  0xc0

#define Lcd_Bus     P0  //定义12864数据口

sbit Mcs    =   P2 ^ 7;  //12864CS1
sbit Scs    =   P2 ^ 6;  //CS2
sbit Enable =   P1 ^ 2; //Enable
sbit Di     =   P1 ^ 0;  //di
sbit RW     =   P1 ^ 1;  //rw
sbit Lcd_Rst=   P2 ^ 5; //rst

//键盘扫描
sbit Add_Key  = P1 ^ 6;//加1键，S1
sbit Dec_Key  = P1 ^ 7;//减1键，S2
sbit OK_Key   = P3 ^ 2;//确定键，S3
sbit Rst_Key  = P3 ^ 3;//系统复位键，S4

//为了编程方便定义的位变量
sbit a0   = ACC ^ 0;
sbit a1   = ACC ^ 1;
sbit a2   = ACC ^ 2;
sbit a3   = ACC ^ 3;
sbit a4   = ACC ^ 4;
sbit a5   = ACC ^ 5;
sbit a6   = ACC ^ 6;
sbit a7   = ACC ^ 7;

bit flag, Bell_Swh,Hourb,Minb,Secb,Kgb;//闹钟调时闪烁标志位
bit sec=0,min=0,hour=0,year=0,mon=0,day=0,weekk=0; //闪烁标志位
bit flag_min = 0,flag_sec = 0;//整点报警标志位
unsigned char id,id2,d,e,S_1302,H_1302,H_Bell,S_Bell; //

//Function Definition　函数声明 
void Delay(int num);
void Init_DS18B20(void);
unsigned char ReadOneChar(void);
void WriteOneChar(unsigned char dat);
unsigned int ReadTemperature(void);
void clock_out(unsigned char dd);
unsigned char clock_in(void);
unsigned char read_clock(unsigned char ord);
void write_clock(unsigned char ord, unsigned char dd);
void Disp(void);
void id_case1_key(void);
void id_case2_key(void);
void Set_time(unsigned char sel,bit sel_1);
void Timer0_Init(void);
void Init_1302(void);
void Set_Bell(unsigned char sel, bit sel_1);
void Beep(void);

//12864
void Delay12864(unsigned int t);
void write_com(unsigned char cmdcode);
void write_data(unsigned char Dispdata);
void frame(void);
void Clr_Scr(void);
void Disp_Img(unsigned char code *img);
void Disp_Digit(unsigned char pag,unsigned char col, unsigned char code *hzk);
void Disp_Chinese(unsigned char pag,unsigned char col, unsigned char code *hzk);
void Init_lcd(void);

//汉字库及数字符号库
unsigned char code nao[32]={0x00,0x00,0xF9,0x12,0x90,0x92,0x96,0xFA,0x92,0x92,0x92,0x12,0x02,0xFE,0x00,0x00,
0x00,0x00,0xFF,0x00,0x1F,0x00,0x00,0x7F,0x00,0x08,0x1F,0x40,0x80,0x7F,0x00,0x00};/*--  文字:  闹  --*/

unsigned char code zhong[32]={0x40,0x30,0x2C,0xEB,0x28,0x28,0x00,0xF8,0x08,0x08,0xFF,0x08,0x08,0xF8,0x00,0x00,
0x01,0x01,0x01,0xFF,0x41,0x21,0x00,0x01,0x01,0x01,0xFF,0x01,0x01,0x01,0x00,0x00};/*--  文字:  钟  --*/

unsigned char code she[32]={0x40,0x41,0xCE,0x04,0x00,0x80,0x40,0xBE,0x82,0x82,0x82,0xBE,0xC0,0x40,0x40,0x00,
0x00,0x00,0x7F,0x20,0x90,0x80,0x40,0x43,0x2C,0x10,0x10,0x2C,0x43,0xC0,0x40,0x00};/*--  文字:  设  --*/

unsigned char code ding[32]={0x00,0x10,0x0C,0xA4,0x24,0x24,0x25,0xE6,0x24,0x24,0x24,0x24,0x14,0x0C,0x04,0x00,
0x40,0x20,0x18,0x07,0x08,0x10,0x20,0x7F,0x42,0x42,0x42,0x42,0x40,0x40,0x00,0x00};/*--  文字:  定  --*/

unsigned char code kai[32]={0x40,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0xFE,0x42,0x42,0x42,0x42,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x00,0x7F,0x00,0x00,0x00,0x00,0x00};/*--  文字:  开  --*/

unsigned char code guan[32]={0x00,0x10,0x10,0x10,0x11,0x1E,0x14,0xF0,0x10,0x18,0x17,0x12,0x18,0x10,0x00,0x00,
0x01,0x81,0x41,0x21,0x11,0x09,0x05,0x03,0x05,0x09,0x31,0x61,0xC1,0x41,0x01,0x00};/*--  文字:  关  --*/

unsigned char code shit[32]={0x00,0xFC,0x44,0x44,0x44,0xFC,0x10,0x90,0x10,0x10,0x10,0xFF,0x10,0x10,0x10,0x00,
0x00,0x07,0x04,0x04,0x04,0x07,0x00,0x00,0x03,0x40,0x80,0x7F,0x00,0x00,0x00,0x00};/*--  文字:  时  --*/
unsigned char code jian[32]={0x00,0xF8,0x01,0x06,0x00,0xF0,0x92,0x92,0x92,0x92,0xF2,0x02,0x02,0xFE,0x00,0x00,
0x00,0xFF,0x00,0x00,0x00,0x07,0x04,0x04,0x04,0x04,0x07,0x40,0x80,0x7F,0x00,0x00};/*--  文字:  间  --*/
unsigned char code dao[32]={0x00,0x22,0x72,0x2A,0x26,0xE2,0x2A,0x72,0x22,0x00,0xF8,0x00,0x00,0xFF,0x00,0x00,
0x00,0x42,0xC2,0x42,0x22,0x3F,0x22,0x12,0x12,0x00,0x0F,0x40,0x80,0x7F,0x00,0x00};/*--  文字:  到  --*/

unsigned char code shi[32]={0x00,0x10,0x2C,0x24,0xA4,0x64,0x25,0x26,0x24,0x24,0xA4,0x24,0x34,0x2C,0x04,0x00,
0x40,0x40,0x48,0x49,0x49,0x49,0x49,0x7F,0x49,0x49,0x49,0x4B,0x48,0x40,0x40,0x00};//室
unsigned char code wen[32]={0x10,0x21,0x86,0x70,0x00,0x7E,0x4A,0x4A,0x4A,0x4A,0x4A,0x7E,0x00,0x00,0x00,0x00,
0x02,0xFE,0x01,0x40,0x7F,0x41,0x41,0x7F,0x41,0x41,0x7F,0x41,0x41,0x7F,0x40,0x00};//温
unsigned char code zero[16]={0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00};//0
unsigned char code one[16]={0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00};//1
unsigned char code two[16]={0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00};//2
unsigned char code three[16]={0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00};//3
unsigned char code four[16]={0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00};//4
unsigned char code five[16]={0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00};//5
unsigned char code six[16]={0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00};//6
unsigned char code seven[16]={0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00};//7
unsigned char code eight[16]={0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00};//8
unsigned char code nine[16]={0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00};//9
unsigned char code point[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00};//小数点
unsigned char code maohao[16]={0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00};//冒号
unsigned char code space[16]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};//空白
unsigned char code fh[16]={0x00,0x00,0x00,0xFC,0xFC,0x00,0x00,0x00,0x00,0x00,0x00,0x6F,0x6F,0x00,0x00,0x00};//!感叹号

unsigned char code nian[32]={0x40,0x20,0x10,0x0C,0xE3,0x22,0x22,0x22,0xFE,0x22,0x22,0x22,0x22,0x02,0x00,0x00,
0x04,0x04,0x04,0x04,0x07,0x04,0x04,0x04,0xFF,0x04,0x04,0x04,0x04,0x04,0x04,0x00};//年
unsigned char code yue[32]={0x00,0x00,0x00,0x00,0x00,0xFF,0x11,0x11,0x11,0x11,0x11,0xFF,0x00,0x00,0x00,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x01,0x01,0x01,0x21,0x41,0x3F,0x00,0x00,0x00,0x00};//月
unsigned char code xing[32]={0x00,0x00,0x00,0xBE,0x2A,0x2A,0x2A,0xEA,0x2A,0x2A,0x2A,0x2A,0x3E,0x00,0x00,0x00,
0x00,0x48,0x46,0x41,0x49,0x49,0x49,0x7F,0x49,0x49,0x49,0x49,0x49,0x41,0x40,0x00};//星
unsigned char code qi[32]={0x00,0x04,0xFF,0x54,0x54,0x54,0xFF,0x04,0x00,0xFE,0x22,0x22,0x22,0xFE,0x00,0x00,
0x42,0x22,0x1B,0x02,0x02,0x0A,0x33,0x62,0x18,0x07,0x02,0x22,0x42,0x3F,0x00,0x00};//期
unsigned char code cone[32]={0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0xC0,0x80,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};//一
unsigned char code ctwo[32]={0x00,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x06,0x04,0x00,0x00,0x00,
0x00,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x18,0x10,0x00};//二
unsigned char code cthree[32]={0x00,0x04,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x84,0x04,0x00,0x00,
0x00,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x20,0x00};//三
unsigned char code cfour[32]={0x00,0xFE,0x02,0x02,0x02,0xFE,0x02,0x02,0xFE,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,
0x00,0x7F,0x28,0x24,0x23,0x20,0x20,0x20,0x21,0x22,0x22,0x22,0x22,0x7F,0x00,0x00};//四
unsigned char code cfive[32]={0x00,0x02,0x82,0x82,0x82,0x82,0xFE,0x82,0x82,0x82,0xC2,0x82,0x02,0x00,0x00,0x00,
0x20,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x20,0x20,0x3F,0x20,0x20,0x30,0x20,0x00};//五
unsigned char code csix[32]={0x10,0x10,0x10,0x10,0x10,0x91,0x12,0x1E,0x94,0x10,0x10,0x10,0x10,0x10,0x10,0x00,
0x00,0x40,0x20,0x10,0x0C,0x03,0x01,0x00,0x00,0x01,0x02,0x0C,0x78,0x30,0x00,0x00};//六
unsigned char code ri[32]={0x00,0x00,0x00,0xFE,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0xFE,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x3F,0x10,0x10,0x10,0x10,0x10,0x10,0x10,0x3F,0x00,0x00,0x00,0x00};//日
unsigned char code sheshidu[32]={0x00,0x02,0x05,0xE2,0x18,0x04,0x02,0x02,0x02,0x02,0x02,0x02,0x04,0x1E,0x00,0x00,
0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x40,0x40,0x40,0x40,0x40,0x20,0x18,0x00,0x00};//摄氏度的符号
unsigned char code spaces[32]={0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};//汉字空格
unsigned char code biaozhi[32]={0x00,0x00,0x00,0x00,0xE0,0xF8,0xFC,0xFC,0xFC,0xFC,0xF8,0xE0,0x00,0x00,0x00,0x00,
0x00,0x10,0x18,0x3E,0x3F,0x7F,0x5F,0x9F,0x9F,0x5F,0x7F,0x3F,0x3E,0x18,0x10,0x00};//闹钟的图标
unsigned char code logo[]={                                     //开机画面-----湘灵电子工作室
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0xF0,0xF8,
0x38,0x18,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0xC0,0xC0,
0xC0,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0xFF,0x03,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0E,0x07,0x03,0x01,0x01,0x01,
0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x81,0x83,0xFF,0x3F,0x07,0x02,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x7E,0xFF,0x78,0xF0,0xC0,0xC0,0x80,0x00,0x80,0xC0,0xE0,0xFF,0xFF,0xE0,
0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0xE0,0xF0,0x08,0x00,0x38,0x0C,0x02,
0x00,0x0C,0x87,0x81,0xC0,0xC0,0xC0,0xE0,0xE0,0xE0,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,
0xF0,0xE0,0xE0,0xE0,0xC0,0xC0,0x80,0x00,0x00,0x80,0x87,0x83,0x82,0x83,0x83,0x83,
0x81,0x81,0x81,0x81,0x81,0x80,0x80,0x80,0xC1,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0xE0,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x03,0x03,0xFF,0xFF,0xFF,0x01,
0x01,0x00,0x00,0x00,0xC0,0xF0,0x7C,0x0E,0x03,0x04,0xC0,0xE0,0xF0,0x78,0x3C,0x3E,
0x9F,0xCF,0xF7,0xF3,0xFF,0xFD,0xFD,0xFD,0xFC,0x9C,0xBC,0xFC,0xFC,0xFC,0xF8,0x00,
0x00,0x00,0x01,0x81,0xFF,0xFF,0xFF,0x7F,0x1C,0x01,0x01,0xC1,0x01,0x01,0x01,0x03,
0xFF,0xFF,0x03,0x01,0x01,0x01,0x01,0x81,0xC1,0x01,0x00,0x00,0x00,0x00,0x80,0xC0,
0x60,0x20,0x30,0x30,0x30,0x30,0x30,0x30,0x30,0x60,0xC0,0x00,0x00,0x00,0x00,0x80,
0x80,0x80,0x80,0x00,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xF8,0x1C,0x07,
0x03,0x06,0x06,0x0C,0x0C,0x06,0x06,0x0C,0x78,0xF0,0x80,0x00,0x00,0x00,0x00,0x00,
0x00,0x02,0x3F,0x0F,0x07,0x06,0x06,0xC2,0xE6,0x78,0x1C,0x0F,0x07,0xFF,0x3F,0x04,
0x00,0x00,0x00,0x3F,0x4F,0x00,0x00,0xF0,0xFC,0x1F,0x07,0x03,0x00,0x00,0x00,0x0E,
0x3F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0x7F,0xBF,0xDF,0xDF,0xEF,0xE7,0x77,0x31,0x38,
0x1C,0x0E,0x0F,0x07,0x83,0x81,0x00,0x00,0x18,0x0E,0x0F,0x07,0x0C,0x0C,0x10,0x00,
0xEF,0xFF,0x70,0xE0,0xC0,0x00,0x07,0x03,0x00,0x00,0x08,0x3E,0x63,0x41,0x41,0x60,
0x20,0x60,0xC0,0x00,0x00,0x00,0xF8,0xCC,0x04,0x07,0x03,0x00,0x00,0xF0,0xFF,0x01,
0x00,0x31,0xFF,0x80,0xC0,0x7E,0x03,0x01,0x0F,0x0C,0x0C,0xFC,0x7F,0x63,0xE0,0x3E,
0x03,0x03,0x43,0x66,0x46,0x04,0x0C,0x88,0xF8,0x60,0x01,0x83,0xEE,0x38,0x00,0x00,
0x00,0x00,0x00,0x80,0xC0,0xE0,0x70,0x31,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0x3F,0x7C,0xF0,0xE2,0xC2,0xC4,0x84,0x84,
0x84,0x86,0x06,0x06,0x86,0x87,0x83,0x83,0x81,0xC1,0xC1,0xE0,0x60,0x70,0x30,0x18,
0x0C,0x04,0x06,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x60,0x38,
0x0F,0x01,0x00,0x00,0x01,0x07,0x0E,0x1C,0x38,0x70,0xE0,0x80,0x00,0x00,0x00,0x00,
0x70,0xF0,0x11,0x1F,0x1C,0x00,0x00,0x07,0x1C,0x18,0x08,0x18,0xF0,0x80,0x01,0x07,
0xFC,0x00,0x00,0xFF,0xFF,0x00,0x00,0xE1,0x31,0x21,0x33,0xCF,0x3C,0x27,0x63,0x26,
0x06,0x00,0x60,0x64,0x24,0x64,0xFC,0x1F,0x03,0x01,0x01,0x01,0x00,0x00,0x00,0x00,
0x00,0x00,0x3F,0xFF,0xFF,0x3F,0x00,0x00,0x00,0x00,0x00,0x00,0x78,0xFF,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x03,0x03,
0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x01,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x30,0x30,0x18,0x18,0x08,0x0C,0x04,0x06,0x03,0x01,0x01,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00,0x00,
0x00,0x01,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x03,0x01,0x00,0x00,0x00,
0x01,0x03,0x03,0x01,0x01,0x03,0x03,0x01,0x00,0x00,0x00,0x03,0x03,0x02,0x02,0x02,
0x02,0x02,0x02,0x02,0x02,0x03,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
};

/******************************************************************************/
void Delay(int num)//延时函数
{
	while(num--) ;
}

/*12864driver.c*/
/******************************************************************************/
void Delay12864(unsigned int t)//
{
	unsigned int i,j;
	for(i=0;i<t;i++)
	{
		for(j=0;j<10;j++);
	}
}

/******************************************************************************/
void write_com(unsigned char cmdcode)//写命令到LCD
{
	Di = 0;
	RW = 0;

	Lcd_Bus = cmdcode;
    Delay12864(0);
	Enable = 1;
	Delay12864(0);
	Enable = 0;
}

/******************************************************************************/
void write_data(unsigned char Dispdata)//写数据到LCD
{
	Di = 1;
	RW = 0;

	Lcd_Bus = Dispdata;
	Delay12864(0);
	Enable = 1;
	Delay12864(0);
	Enable = 0;
}

/*******************************************************************************/
void frame(void)//显示边框
{
	unsigned char i;
	Mcs = 1;
	Scs = 1;
 	write_com(Page_Add+0);
 	write_com(Col_Add+0);
	for(i=0;i<64;i++) 
	{
		write_data(0x01);
	}
	write_com(Page_Add+7);
	write_com(Col_Add+0);
	for(i=0;i<64;i++)
 	{
		write_data(0x80);
	}
	for(i=0;i<8;i++)
	{
		Mcs=0;
		Scs=1;
		write_com(Page_Add+i);
		write_com(Col_Add+63);
		write_data(0xff);
		Mcs=1;
		Scs=0;
		write_com(Page_Add+i);
		write_com(Col_Add+0);
		write_data(0xff);
	}
}

/******************************************************************************/
void Clr_Scr(void)//清除内存
{
	unsigned char j,k;
	Mcs=1;Scs=1;
 	write_com(Page_Add+0);
 	write_com(Col_Add+0);

 	for(k=0;k<8;k++)
	{
		write_com(Page_Add+k);
		for(j=0;j<64;j++)
		{
			write_data(0x00);
		}
 	}
}

/*******************************************************************************/
void Disp_Img(unsigned char code *img)//显示12864图片
{
	unsigned char j,k;
 	for(k=0;k<8;k++)
	{
  		Mcs=1;
		Scs=0;
		Delay(10);
  		write_com(Page_Add+k);
  		write_com(Col_Add+0);
  		for(j=0;j<64;j++) 
		{
			write_data(img[k*128+j]);
		}
  		Mcs=0;
		Scs=1;
	 	Delay(10);
  		write_com(Page_Add+k);
  		write_com(Col_Add+0);
  		for(j=64;j<128;j++)
	    {
			write_data(img[k*128+j]);
		}
 	}
}

/*******************************************************************************/
void Disp_Chinese(unsigned char pag,unsigned char col,  char code *hzk)
{   //指定位置显示汉字16*16
	unsigned char j=0,i=0;

	for(j=0;j<2;j++)
	{
		write_com(Page_Add+pag+j);
		write_com(Col_Add+col);
		for(i=0;i<16;i++) 
		{
			write_data(hzk[16*j+i]);
		}
	}
}

/*******************************************************************************/
void Disp_Digit(unsigned char pag,unsigned char col, unsigned char code *hzk)
{   //指定位置显示字母或数字8*16
	unsigned char j=0, i=0;

	for(j=0;j<2;j++)
	{
		write_com(Page_Add+pag+j);
		write_com(Col_Add+col);
		for(i=0;i<8;i++) 
		{
			write_data(hzk[8*j+i]);
		}
	}
}

/********************************************************************************/
void Init_lcd(void)//初始化LCD屏
{
	Lcd_Rst=0;
	Delay12864(100);
	Lcd_Rst=1;
	Delay12864(100);

	Mcs=1;	Scs=1;

	Delay12864(100);
	write_com(Disp_Off);
	write_com(Page_Add+0);
	write_com(Start_Line+0);
	write_com(Col_Add+0);
	write_com(Disp_On);
}
	
/*******************************************************************************/
void Init_DS18B20(void)//初始化ds1820
{
	unsigned char x=0;
	DQ = 1;    //DQ复位
	Delay(8);  //稍做延时
	DQ = 0;    //单片机将DQ拉低
	Delay(80); //精确延时 大于 480us
	DQ = 1;    //拉高总线
	Delay(14);
	x=DQ;      //稍做延时后 如果x=0则初始化成功 x=1则初始化失败
	Delay(20);
}

/******************************************************************************/
unsigned char ReadOneChar(void)//读一个字节
{
12 3 下一页
💿 文件大小 70 K
👤 上传用户 lxwcqq
📂 所属分类单片机开发
🏷️ 相关标签

#dan #万年历 #温度 #单片机应用
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -