lang_nat.h

eybuild-x86-arm920t-2.6.7.tar 很好的嵌入式WEB开发环境

/* nat */
    EB_MULTI_LANG_BEGIN(NULL, NULL) {
    /* log */
    //	EB_LANG_ADD("inputipleft", "请输入IP地址（", "Please input IP address ("),
    //	EB_LANG_ADD("inputipright", "）！", 	")!"),
    //	EB_LANG_ADD("reinput", "IP地址输入错误，请重新输入（", "Please input gateway"),
        EB_LANG_ADD("retryinput", "IP地址输入错误，请重新输入！", "IP address invalid, please reinput."),
        EB_LANG_ADD("dmz", "DMZ主机", "DMZ Host"),
        EB_LANG_ADD("dmzdesc", 
                "在正常情况下，NAT路由器是禁止广域网直接访问局域网里的计算机的。但是，有些时候我们又需要将局域网内的某台计算机开放给广域网，以实现双向通信，此时只要把该计算机设置为DMZ主机就可以实现了。", 
                "You can configure the static route in this page"),
        EB_LANG_ADD("dmznote", 
                "( 注意:设置DMZ主机之后，与该IP相关的防火墙设置将不起作用。)", 
                "( Notice: After setup DMZ, firewall will be affet for this IP.)"),
        EB_LANG_ADD("dmzip", "DMZ主机IP地址", "DMZ host IP"),
  	
    /* upnp */
        EB_LANG_ADD("upnp", "UPnP设置", "UPnP Setting"),
        EB_LANG_ADD("upnpdesc", 
                "本页设置/显示UPnP的设置以及工作状态。", 
                "You can configure the UPnP in this page"),
        EB_LANG_ADD("upnpstat", "当前UPnP状态：", "UPnP STATUS"),
        EB_LANG_ADD("upnplist", "当前UPnP设置列表", "Current UPnP List"),
        EB_LANG_ADD("appdesc", "应用描述", "APP Desc"),
        EB_LANG_ADD("externport", "外部端口", "Extern Port"),
        EB_LANG_ADD("protocoltype", "协议类型", "protocol type"),
        EB_LANG_ADD("internalport", "内部端口", "internal port"),
        EB_LANG_ADD("delall", "删除所有", "Delete All"),
    
    /* special app */
        EB_LANG_ADD("limitports", "只能输入5个开放端口号段！", "You can input at most 5 port"),
        EB_LANG_ADD("inputtrigerport", "请输入触发端口号！", "Please input triger port"),
        EB_LANG_ADD("inputport", "请输入开放端口号！", "Please input open port"),
        EB_LANG_ADD("illegalinput", 
                "端口输入中含有非法字符，请重新输入！", 
                "Include illegal character, please input again"),
        EB_LANG_ADD("spapp", "特殊应用程序", "UPnP STATUS"),
        EB_LANG_ADD("spdesc", 
                "某些特殊的应用，比如视频会议，Internet游戏，网络电话等，可能无法在简单的NAT路由器下正常工作。但是，通过本页的正确设置之后，就可以弥补以上的这些缺憾，使得这些应用能够正常工作。", 
                "For some special application, such as video conference, internet game, ...."),
        EB_LANG_ADD("trigerport", "触发端口", "Triger Port"),
        EB_LANG_ADD("trigerprotocol", "触发协议", "Triger Protocol"),
        EB_LANG_ADD("openport", "开放端口", "Open Port"),
        EB_LANG_ADD("openprotocol", "开放协议", "Open Protocol"),
        EB_LANG_ADD("genaralapp", "常用应用程序：", "General Application"),
        EB_LANG_ADD("fillto", "填空到", "Fill to"),
    
    /* special app */
        EB_LANG_ADD("noport", "端口号不能为空或为零!", "Protocol port can not be blank or zero!"),
        EB_LANG_ADD("porterr", "端口号含有非法字符，请重新输入！", "Port include illegal character, please input again"),
        EB_LANG_ADD("iperr", "IP地址错误！请重新输入！", "IP include illegal character, please input again"),
        EB_LANG_ADD("virtualserver", "虚拟服务器", "UPnP STATUS"),
        EB_LANG_ADD("vsdesc", 
                "虚拟服务器，简单地说，您可以做这么样的指定：对路由器任何一个或一段协议端口的访问（从WAN口进来的访问），都可以重定位到局域网内某一台指定的网络服务器。", 
                "Virtual Server, in one words, it can hep you map a range of protocol port (from WAN) to a specifical host in LAN."),
        EB_LANG_ADD("serviceport", "服务端口", "Service Port"),
    
        EB_LANG_ADD(NULL, NULL, NULL)
    };