zl5011xcpq.c

Zalink50114----TDMoIP芯片驱动源码

/*******************************************************************************
*
*  File name:              zl5011xCpq.c
*
*  Version:                21
*
*  Author:                 LCW
*
*  Date created:           11/04/2002
*
*  Copyright 2002, 2003, 2004, 2005, Zarlink Semiconductor Limited.
*  All rights reserved.
*
*  Module Description:
*  This file contains all the functions that will initialise and control
*  the CPQ block.
*
*  Revision History:
*
*  Rev:  Date:       Author:  Comments:
*  1     15/04/2002  LCW      Created
*  2     15/04/2002  LCW      Minor mods
*  3     19/04/2002  LCW      Prepared for code review
*  4     19/04/2002  LCW      Minor mods
*  5     19/04/2002  LCW      Minor mods
*  6     19/04/2002  LCW      Minor mods
*  7     01/05/2002  LCW      Minor mods
*  8     07/05/2002  LCW      Minor mods
*  9     07/05/2002  LCW      Minor mods
*  10    08/05/2002  LCW      Minor mods
*  11    16/05/2002  LCW      Minor mods
*  12    16/05/2002  LCW      Minor mods
*  13    12/06/2002  MRC      Update
*  14    12/07/2002  MRC      Rationalised the 2 enums for CPU queues
*  15    19/09/2002  MRC      Tidied up register addresses
*  16    01/10/2002  DJA      ZL5011X_TRACE messages fixed up
*  17    18/10/2002  PJE      interruptEnable/Disable updated
*  18    31/10/2002  MRC      Added variants + minor fixes
*  19    07/04/2003  ARW      Added new function zl5011xCpqPacketsToReceive
*  20    07/04/2003  ARW      Fixed bug found in zl5011xCpqSetOverrunMode
*  21    15/02/2005  MRC      Corrected a few comments
*
*******************************************************************************/

/*****************   INCLUDE FILES   ******************************************/

#include "zl5011x.h"
#include "zl5011xCpqMap.h"
#include "zl5011xCpq.h"
#include "zl5011xRdWr.h"
#include "zl5011xUtilLib.h"

/*****************   # DEFINES   **********************************************/

/*****************   STATIC FUNCTION DECLARATIONS   ***************************/

/*****************   STATIC GLOBAL VARIABLES   ********************************/

/*****************   EXPORTED GLOBAL VARIABLES   ******************************/

/*****************   FUNCTION DEFINTIONS   ************************************/

/*******************************************************************************

 Function:
   zl5011xCpqInit

 Description:
   Initialises the CPQ block.

 Inputs:
    zl5011xParams           Pointer to the structure for this device instance

 Outputs:
   None

 Returns:
  zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xCpqInit(zl5011xParamsS *zl5011xParams)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T loop;

   ZL5011X_TRACE(ZL5011X_CPQ_FN_ID, "zl5011xCpqInit:", 0, 0, 0, 0, 0, 0);

   /* set up defaults for the queue depths */
   for (loop = 0; loop < ZL5011X_CPQ_QUEUES; loop++)
   {
      status = zl5011xCpqConfigureQueue(zl5011xParams, (zl5011xQueueE)loop,
            ZL5011X_CPQ_DEFAULT_GRAN_THLD, ZL5011X_CPQ_DEFAULT_PACKET_DROP_MODE);
   }

   /* set a default for the maximum number of grnaules to be used in the
      CPU queues */
   if(status == ZL5011X_OK)
   {
      status = zl5011xCpqSetGranuleUsage(zl5011xParams, ZL5011X_CPQ_DEFAULT_GRAN_THLD);
   }

   return status;
}

/*******************************************************************************

 Function:
   zl5011xCpqConfigureQueue

 Description:
   Sets the queue overrun threshold and maximum queue size. If the queue is
   configured to drop packets when the threshold is reached, then the maximum
   size in terms of granules will never be reached.

 Inputs:
   zl5011xParams       Pointer to the structure for this device instance
   queue              The queue on which to set the threshold
   overrunThld        Overrun threshold
   enablePacketDrop   Enables/disables packet dropping mode
   maxGranUsage       Sets the maximum number of granules to be held in the
                      queue

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xCpqConfigureQueue(zl5011xParamsS *zl5011xParams,
                                  zl5011xQueueE queue, Uint32T overrunThld,
                                  zl5011xBooleanE enablePacketDrop)
{

   zlStatusE status = ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_CPQ_FN_ID, "zl5011xCpqConfigureQueue: Queue %d, Threshold %d, Drop Mode %d",
         queue, overrunThld, enablePacketDrop, 0, 0, 0);

   /* Check enum parameter is within range */
   status = ZL5011X_CHECK_QUEUE_NUMBER(queue);

   if(status == ZL5011X_OK)
   {
      status = ZL5011X_CHECK_BOOLEAN(enablePacketDrop);
   }

   if(status == ZL5011X_OK)
   {
     /* Set overrun threshold */
     status = zl5011xCpqSetOverrunThreshold(zl5011xParams, queue,
         overrunThld);
   }

   if(status == ZL5011X_OK)
   {
      /* Set packet dropping mode */
      status = zl5011xCpqSetOverrunMode(zl5011xParams, queue, enablePacketDrop);
   }

   return status;
}

/*******************************************************************************

 Function:
   zl5011xCpqSetOverrunThreshold

 Description:
   Sets the overrun threshold.

 Inputs:
   zl5011xParams     Pointer to the structure for this device instance
   queue            The queue to be configured
   overrunThld      QoS parameter used to limit the capacity of queues

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xCpqSetOverrunThreshold(zl5011xParamsS *zl5011xParams,
                                       zl5011xQueueE queue, Uint32T overrunThld)
{
   zlStatusE status = ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_CPQ_FN_ID,"zl5011xCpqSetOverrunThreshold: Queue %d,Threshold %d",
         queue, overrunThld, 0, 0, 0, 0);

   /* Check queue number is within range */
   status = ZL5011X_CHECK_QUEUE_NUMBER(queue);

   /* Check parameter for illegal value */
   if (status == ZL5011X_OK)
   {
      if ((overrunThld & ~ZL5011X_CPQ_OVERRUN_THLD_CHECK) != 0)
      {
         status = ZL5011X_PARAMETER_INVALID;
      }
   }

   if (status == ZL5011X_OK)
   {
      /* Set overrun threshold to a queue */
      status = zl5011xWrite(zl5011xParams,
            ZL5011X_CPQ_OVERFLOW + (queue * sizeof(Uint32T)), overrunThld);

      /* Record parameters to device structure */
      zl5011xParams->cpuIf.overrunThreshold[queue] = overrunThld;
   }

   return status;
}

/*******************************************************************************

 Function:
   zl5011xCpqSetOverrunMode

 Description:
   Enables or disables packet dropping. When in enabled mode, packets will
   be dropped when overrun threshold is exceeded.

 Inputs:
   zl5011xParams         Pointer to the structure for this device instance
   queue                The queue on which to set overrun mode
   enablePacketDrop     ZL5011X_TRUE to drop packets when the threshold is
                        exceeded or ZL5011X_FALSE to continue

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xCpqSetOverrunMode(zl5011xParamsS *zl5011xParams,
                                  zl5011xQueueE queue, zl5011xBooleanE enablePacketDrop)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T bits, bitMask;

   ZL5011X_TRACE(ZL5011X_CPQ_FN_ID, "zl5011xCpqSetOverrunMode: Queue %d, Mode %d",
         queue, enablePacketDrop, 0, 0, 0, 0);

   /* Check enum parameter is within range */
   status = ZL5011X_CHECK_QUEUE_NUMBER(queue);

   if(status == ZL5011X_OK)
   {
      status = ZL5011X_CHECK_BOOLEAN(enablePacketDrop);
   }

   /* Set packet dropping */
   if (status == ZL5011X_OK)
   {
      bitMask = ZL5011X_1BIT_MASK << (queue +ZL5011X_CPQ_ENABLE_THRES_DROP0);

      if (enablePacketDrop == ZL5011X_TRUE)
      {
         bits = bitMask;
      }
      else
      {
         bits = 0;
      }

      status = zl5011xReadModWrite(zl5011xParams, ZL5011X_CPQ_CONTROL,
            bits, bitMask);

      /* Record parameters in device structure */
      zl5011xParams -> cpuIf.enablePacketDrop[queue] = enablePacketDrop;
   }

   return status;
}

/*******************************************************************************

 Function:
   zl5011xCpqSetGranuleUsage

 Description:
   Controls the maximum number of granules that can be used by the CPQ.

 Inputs:
   zl5011xParams          Pointer to the structure for this device instance
   maxNumberOfGranules   Maximum number of granules used by CPQ.