zl5011xptx.c

Zalink50114----TDMoIP芯片驱动源码

/*******************************************************************************
*
*  File name:              zl5011xPtx.c
*
*  Version:                16
*
*  Author:                 MRC
*
*  Date created:           11/04/2002
*
*  Copyright 2002, 2003, 2004, 2005, Zarlink Semiconductor Limited.
*  All rights reserved.
*
*  Module Description:
*
*  This file contains all the functions that will initialise and control
*  the Ptx block. The Ptx can manage the headers for all of the contexts
*  plus a further 16 for host flows.
*  For context data flows, the PTX adds a header, which is nominally the
*  ethernet and IP headers (provides features to control the length and
*  checksum).
*  A further 16 MPID's are required for host to Lan packet transmission
*  (one for each port / queue combination), and the header is not
*  attached for these.
*
*  Revision History:
*
*  Rev:  Date:       Author:  Comments:
*  1     11/04/2002  MRC      Creation
*  2     22/04/2002  MRC      The table base address register needed the value
*                             in 64 bit fields, that is divided by 8.
*  3     22/04/2002  MRC      Fixed address problem in loop in set header fn
*  4     22/04/2002  MRC      Initialised the host table entries
*  5     24/04/2002  MRC      the number of context headers and the size of
*                             headers are now parameters to configure.
*  6     26/04/2002  MRC      Changed some data names in response to comments
*                             from Thomas, regarding the MIB interface.
*  7     29/04/2002  MRC      Changes following code review.
*  8     07/05/2002  MRC      Changed enum to use uppercase
*                             P(acketTxHeaderModeE).
*  9     19/06/2002  MRC      Updated following block change
*  10    20/06/2002  MRC      Updated
*  11    31/07/2002  MRC      Changed the return code for header size error in
*                             set header fn
*  12    31/10/2002  MRC      Added variants + minor fixes
*  13    03/04/2003  MRC      When a header is disabled, the length field is
*                             also cleared out.
*  14    09/06/2003  DJA      Performed pre-audit actions
*  15    04/05/2005  APL      Clear header descriptors on initialisation.
*                             Added zl5011xPtxEnableSrcMacOverwrite function.
*  16    06/05/2005  APL      Minor fix to initialisation in zl5011xPtxConfigure
*
*******************************************************************************/

/*****************   INCLUDE FILES                *****************************/

#include "zl5011x.h"
#include "zl5011xPtx.h"
#include "zl5011xPtxMap.h"
#include "zl5011xUtilLib.h"

/*****************   EXPORTED GLOBAL VARIABLES    *****************************/

/*****************   STATIC GLOBAL VARIABLES      *****************************/

/*******************************************************************************

 Function:
    zl5011xPtxInit

 Description:
    This function initialises the Ptx block and data structure.

 Inputs:
    zl5011xParams      Pointer to the structure for this device instance

 Outputs:
    None

 Returns:
   zlStatusE

 Remarks:
    None

*******************************************************************************/

zlStatusE zl5011xPtxInit(zl5011xParamsS *zl5011xParams)
{
   zlStatusE status = ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_PTX_FN_ID, "zl5011xPtxInit:", 0, 0, 0, 0, 0, 0);

   /* The PTX block itself needs no initialisation */

   return(status);
}

/*******************************************************************************

 Function:
    zl5011xPtxConfigure

 Description:
    This function initialises the header descriptors. This disables header
    attachment and source MAC overwrite for all normal and host contexts

 Inputs:
   zl5011xParams   Pointer to the structure for this device instance

 Outputs:
    None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xPtxConfigure(zl5011xParamsS *zl5011xParams)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T ptxCtrlAddress;
   Uint32T *ptxCtrlPtr;
   Uint32T loop;

   ZL5011X_TRACE(ZL5011X_PTX_FN_ID,
         "zl5011xPtxConfigure:",
         0, 0, 0, 0, 0, 0);

   /* Get the address of the first header descriptor */
   status = zl5011xPtxGetTableAddress(zl5011xParams, 0, &ptxCtrlAddress);

   ptxCtrlPtr = (Uint32T*)ptxCtrlAddress;

   for (loop = 0; loop < (ZL5011X_PKT_TX_NUM_CONTEXT_HEADERS + ZL5011X_PKT_TX_NUM_HOST_HEADERS) &&
                         (status == ZL5011X_OK); loop++)
   {
      /* Zero the memory using 32-bit writes.
         Each descriptor is 8 bytes long so two writes required */
      if (status == ZL5011X_OK)
      {
         status = zl5011xWrite(zl5011xParams, (Uint32T)ptxCtrlPtr, 0x00);
         ptxCtrlPtr++;
      }
      if (status == ZL5011X_OK)
      {
         status = zl5011xWrite(zl5011xParams, (Uint32T)ptxCtrlPtr, 0x00);
         ptxCtrlPtr++;
      }
   }

   return(status);
}

/*******************************************************************************

 Function:
    zl5011xPtxEnableHeaderInsertion

 Description:
    Controls whether the PTX attaches a header to the data or not.

 Inputs:
    zl5011xParams     Pointer to the structure for this device instance
    tableEntry       entry in the table to disable header insertion for
    enable           ZL5011X_TRUE to allow the PTX to add the header
                     ZL5011X_FALSE to pass the data through without adding a header

 Outputs:
    None

 Returns:
   zlStatusE

 Remarks:
   This function will not normally be used as header insertion is controlled
   using zl5011xPtxSetHeader function but is retained for backward compatibility

*******************************************************************************/

zlStatusE zl5011xPtxEnableHeaderInsertion(zl5011xParamsS *zl5011xParams,
      Uint32T tableEntry, zl5011xBooleanE enable)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T tableAddr, bits, bitMask;

   ZL5011X_TRACE(ZL5011X_PTX_FN_ID,
         "zl5011xPtxEnableHeaderInsertion: entry %3d, enable %d",
         tableEntry, enable, 0, 0, 0, 0);

   /* check that the table entry is a valid number. Note host contexts do not support header insertion */
   if (tableEntry >= ZL5011X_PKT_TX_NUM_CONTEXT_HEADERS)
   {
      status = ZL5011X_PARAMETER_INVALID;
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPtxGetTableAddress(zl5011xParams, tableEntry, &tableAddr);
   }

   if (status == ZL5011X_OK)
   {
      /* set the bit to enable the header to be attached */
      if (enable == ZL5011X_TRUE)
      {
         bitMask = ZL5011X_1BIT_MASK << ZL5011X_PTX_ENABLE_HEADER_BIT;
         bits = bitMask;
      }
      else
      {
         /* must also clear out the length field to allow packet to be sent
            without a header attached */
         bits = 0;
         bitMask = (ZL5011X_1BIT_MASK << ZL5011X_PTX_ENABLE_HEADER_BIT) |
               (ZL5011X_PTX_HEADER_LENGTH_MASK << ZL5011X_PTX_HEADER_LENGTH_BITS);
      }

      status = zl5011xReadModWrite(zl5011xParams, tableAddr, bits, bitMask);
   }

   return(status);
}

/*******************************************************************************

 Function:
    zl5011xPtxEnableSrcMacOverwrite

 Description:
    Controls whether the PTX overwrites the outgoing packet source MAC address
    with the device MAC address.

 Inputs:
    zl5011xParams     Pointer to the structure for this device instance
    context          Context number for the header to control
    enable           ZL5011X_TRUE to make the PTX overwrite the source MAC
                     ZL5011X_FALSE to pass the data through with the source MAC
                        unchanged

 Outputs:
    None

 Returns:
   zlStatusE

 Remarks:
   Will normally be used only for host contexts as normal contexts are controlled
   using zl5011xPtxSetHeader function

*******************************************************************************/

zlStatusE zl5011xPtxEnableSrcMacOverwrite(zl5011xParamsS *zl5011xParams,
      Uint32T context, zl5011xBooleanE enable)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T descriptorAddr, bits, bitMask;

   ZL5011X_TRACE(ZL5011X_PTX_FN_ID,
         "zl5011xPtxEnableSrcMacOverwrite: context %3d, enable %d",
         context, enable, 0, 0, 0, 0);

   /* check that the context is a valid normal or host context number */
   if (context >= (ZL5011X_PKT_TX_NUM_CONTEXT_HEADERS + ZL5011X_PKT_TX_NUM_HOST_HEADERS))
   {
      status = ZL5011X_PARAMETER_INVALID;
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPtxGetTableAddress(zl5011xParams, context, &descriptorAddr);
   }

   if (status == ZL5011X_OK)
   {
      bitMask = ZL5011X_1BIT_MASK << ZL5011X_PTX_SRC_ADDR_FROM_MAC_BIT;
      if (enable == ZL5011X_TRUE)
      {  /* set the bit to enable the MAC address to be overwritten */
         bits = bitMask;
      }
      else
      {  /* clear the bit */
         bits = 0;
      }

      status = zl5011xReadModWrite(zl5011xParams, descriptorAddr, bits, bitMask);
   }

   return(status);
}

/*******************************************************************************

 Function:
    zl5011xPtxGetTableAddress

 Description:
   Returns the base address of the control header for the required context.