zl5011xpkq.c

Zalink50114----TDMoIP芯片驱动源码

/*******************************************************************************
*
*  File name:              zl5011xPkq.c
*
*  Version:                23
*
*  Author:                 LCW
*
*  Date created:           16/04/2002
*
*  Copyright 2002, 2003, 2004, 2005, Zarlink Semiconductor Limited.
*  All rights reserved.
*
*  Module Description:
*  This file contains all the functions that will initialise and control
*  the PKQ block.
*
*  Revision History:
*
*  Rev:  Date:       Author:  Comments:
*  1     16/04/2002  LCW      Creation.
*  2     17/04/2002  LCW      Minor mods.
*  3     09/05/2002  LCW      Minor mods.
*  4     14/05/2002  LCW      Minor mods.
*  5     16/05/2002  LCW      Minor mods.
*  6     16/05/2002  LCW      Minor mods.
*  7     05/06/2002  MRC      Update
*  8     05/06/2002  MRC      Fixed a few ZL5011X_TRACE statements
*  9     19/05/2002  MRC      Uses defines from addrmap for number of entries
*                             in the context table
*  10    26/06/2002  LCW      Update
*  11    28/06/2002  LCW      Code review actions
*  12    26/07/2002  MRC      Changed queue weighting. Sum of weights no longer
*                             has to add to add to 64.
*  13    22/10/2002  MRC      zl5011xPkqSetMpidConnection now records port and
*                             queue settings in the device structure
*  14    31/10/2002  MRC      Added variants + minor fixes
*  15    29/01/2003  MRC      Added check for the total granule threshold param
*  16    22/05/2003  MRC      Changed size of arrays for Lan Tx port / queue
*  17    09/06/2003  DJA      Performed pre-audit actions
*  18    23/06/2004  APL      Corrected an array index into internal current
*                             state structure and removed duplicate write.
*                             Validated port parameter for zl5011xPkqConfigureQueue
*  19    29/07/2004  MRC      Fixed some compiler warnings
*  20    17/09/2004  MRC      Added check for the queue granule threshold
*  21    17/09/2004  MRC      Changed default for queue granule threshold
*  22    27/09/2004  MRC      Added function to return port / queue for an mpid
*  23    21/07/2005  MRC      Reduced default number of granules for discard port
*
*******************************************************************************/

/*****************   INCLUDE FILES   ******************************************/
#include "zl5011x.h"
#include "zl5011xPkqMap.h"
#include "zl5011xPkq.h"
#include "zl5011xUtilLib.h"
#include "zl5011xRdWr.h"

/*******************************************************************************
 Function:
    zl5011xPkqInit

 Description:
   Called at initialisation time. Enables packet dropping when the total granule
   usage threshold is exceeded. Initialises the MPID connection table.

 Inputs:
    zl5011xParams      Pointer to the structure for this device instance

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None
*******************************************************************************/
zlStatusE  zl5011xPkqInit(zl5011xParamsS *zl5011xParams)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T i,tempGranules;
   Uint8T portNumber;
   Uint8T queueNumber;

   ZL5011X_TRACE(ZL5011X_PKQ_FN_ID, "zl5011xPkqInit:", 0, 0, 0, 0, 0, 0);

   /* initialise the PKQ mode and total threshold limit for the queues */
   status = zl5011xPkqSetTotalThresholdMode(zl5011xParams,
         ZL5011X_PKQ_DEFAULT_PACKET_DROP_MODE);

   if (status == ZL5011X_OK)
   {
      status = zl5011xPkqSetTotalGranuleThreshold(zl5011xParams,
            ZL5011X_PKQ_DEFAULT_TOTAL_GRAN_THLD);
   }

   /* Set granule threshold for all queues */
   for (portNumber = 0; portNumber < ZL5011X_PKQ_NUMBER_OF_PORTS; portNumber++)
   {
      if (portNumber == zl5011xParams->devLimits.lanDiscardPort)
      {
         tempGranules = ZL5011X_PKQ_DEFAULT_DISCARD_GRAN_THLD;
      }
      else
      {
         tempGranules = ZL5011X_PKQ_DEFAULT_QUEUE_GRAN_THLD;
      }

      for (queueNumber = 0; queueNumber < ZL5011X_PKQ_QUEUES_PER_PORT; queueNumber++)
      {
         if (status != ZL5011X_OK)
         {
            break;
         }

         status = zl5011xPkqSetGranuleThreshold(zl5011xParams, portNumber,
               queueNumber, tempGranules);
      }
   }

   /* Enable packet dropping mode for all queues */
   for (portNumber = 0; portNumber < ZL5011X_PKQ_NUMBER_OF_PORTS; portNumber++)
   {
      for (queueNumber = 0; queueNumber < ZL5011X_PKQ_QUEUES_PER_PORT; queueNumber++)
      {
         if (status != ZL5011X_OK)
         {
            break;
         }
         status = zl5011xPkqSetThresholdMode(zl5011xParams, portNumber,
               queueNumber, ZL5011X_PKQ_DEFAULT_PACKET_DROP_MODE);
      }
   }

   /* initialise the queues to be strict priority */
   for (portNumber = 0; portNumber < ZL5011X_PKQ_NUMBER_OF_PORTS; portNumber++)
   {
      if (status != ZL5011X_OK)
      {
         break;
      }
      status = zl5011xPkqSetQueuePriority(zl5011xParams, portNumber, ZL5011X_WFQ_NONE);
   }

   /* setup the context table. The first entries are for MPID associated
      data flows, and the next 16 are for host flows (where there is one for
      each port and queue combination) */
   for (i = 0; i < ZL5011X_PKT_TX_NUM_CONTEXT_HEADERS; i++)
   {
      if (status != ZL5011X_OK)
      {
         break;
      }
      /* initialise data flows to use a default Lan port and queue */
      status = zl5011xPkqSetMpidConnection(zl5011xParams, i,
            ZL5011X_PKQ_DEFAULT_PORT, ZL5011X_PKQ_DEFAULT_QUEUE);
   }

   /* Add further MPIDs for use by host Tx */
   for (i = 0; i < ZL5011X_PKT_TX_NUM_HOST_HEADERS; i++)
   {
      if (status != ZL5011X_OK)
      {
         break;
      }
      queueNumber = (Uint8T)(i % ZL5011X_PKQ_QUEUES_PER_PORT);

      portNumber = (Uint8T)((i / ZL5011X_PKQ_QUEUES_PER_PORT) % ZL5011X_PKQ_NUMBER_OF_PORTS);

      status = zl5011xPkqSetMpidConnection(zl5011xParams,
            ZL5011X_PKT_TX_NUM_CONTEXT_HEADERS + i,
            portNumber, queueNumber);
   }

   return (status);
}

/*******************************************************************************
 Function:
    zl5011xPkqSetQueuePriority

 Description:
   Implements a quality of service feature by setting the queue priority for a
   particular port. A queue will be allocated strict priority or weighted fair
   queueing status.
   When queues are in strict priority mode the highest priority queue is emptied
   first.
   For WFQ, each queue has its own weight to determine the amount of bandwidth
   that will be allocated for its queue.

 Inputs:
   zl5011xParams       Pointer to the structure for this device instance
   portNumber         LAN port number
   priorityMode       Priority mode of port can take the following values:

 Outputs:
   None

 Returns:
  zlStatusE

 Remarks:
   None
*******************************************************************************/

zlStatusE  zl5011xPkqSetQueuePriority(zl5011xParamsS *zl5011xParams,
                                    Uint8T portNumber,
                                    zl5011xPacketQueuePriorityModeE priorityMode)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T queueWeighting = 0, mask = 0;

   ZL5011X_TRACE(ZL5011X_PKQ_FN_ID, "zl5011xPkqSetQueuePriority: Port %ld,Prioity Mode %ld",
         portNumber, priorityMode, 0, 0, 0, 0);

   /* Check priority mode is valid */
   if (status == ZL5011X_OK)
   {
      status = ZL5011X_CHECK_WFQ(priorityMode);
   }

   if (status == ZL5011X_OK)
   {
      queueWeighting = priorityMode << (portNumber * ZL5011X_PKQ_NUMBER_OF_WFQ_BITS);
      mask = ZL5011X_2BIT_MASK << (portNumber * ZL5011X_PKQ_NUMBER_OF_WFQ_BITS);

      status = zl5011xReadModWrite(zl5011xParams, ZL5011X_PKQ_LMR, queueWeighting,
            mask);

     /* Record port priority mode in device structure */
      zl5011xParams -> pkq.priorityMode[portNumber] = priorityMode;
   }

   return (status);
}
/*******************************************************************************
 Function:
    zl5011xPkqSetWeighting

 Description:
   Sets weighting for queue

 Inputs:
   zl5011xParams       Pointer to the structure for this device instance
   portNumber         LAN port number
   queue0Weighting    Weighting of queue 0
   queue1Weighting    Weighting of queue 1
   queue2Weighting    Weighting of queue 2
   queue3Weighting    Weighting of queue 3

 Outputs:
   None

 Returns:
  zlStatusE

 Remarks:
   None
*******************************************************************************/

zlStatusE  zl5011xPkqSetWeighting(zl5011xParamsS *zl5011xParams,
                              Uint8T portNumber,
                              Uint32T queue0Weighting,
                              Uint32T queue1Weighting,
                              Uint32T queue2Weighting,
                              Uint32T queue3Weighting)
{
   zlStatusE status = ZL5011X_OK;
   Uint32T gpBuffer = 0, i, registerAddress;
   Uint32T queueWeights[ZL5011X_PKQ_NUM_QUEUES];

   ZL5011X_TRACE(ZL5011X_PKQ_FN_ID,
         "zl5011xPkqSetWeighting: Port %ld, Q0 %ld, Q1 %ld, Q2 %ld,  Q3 %ld",
         portNumber, queue0Weighting, queue1Weighting, queue2Weighting,
         queue3Weighting, 0);

   queueWeights[0] = queue0Weighting;
   queueWeights[1] = queue1Weighting;
   queueWeights[2] = queue2Weighting;
   queueWeights[3] = queue3Weighting;

   /* Mask out unused bits */
   for (i = 0; i < ZL5011X_PKQ_NUM_QUEUES; i++)
   {
      if (status != ZL5011X_OK)
      {
         break;
      }

      if (queueWeights[i] > ZL5011X_PKQ_MAX_QUEUE_WEIGHTING)
      {
         status = ZL5011X_PARAMETER_INVALID;
      }
   }

   if (status == ZL5011X_OK)
   {
      for (i = 0; i < ZL5011X_PKQ_QUEUES_PER_PORT; i++)
      {
         gpBuffer |= queueWeights[i] << (ZL5011X_PKQ_WFQ_SHIFT * i);
      }

      registerAddress = ZL5011X_PKQ_WTA + (portNumber * sizeof(Uint32T));
      status = zl5011xWrite(zl5011xParams, registerAddress, gpBuffer);

      /* Record queue weights in device structure */
      if (status == ZL5011X_OK)
      {
         for (i = 0; i < ZL5011X_PKQ_QUEUES_PER_PORT; i++)
         {
            zl5011xParams -> pkq.queueWeight[portNumber][i] = queueWeights[i];
         }
      }
   }

   return (status);
}

/*******************************************************************************
 Function:
    zl5011xPkqConfigureQueue

 Description:
   Sets threshold mode and size of thresholds.

 Inputs:
   zl5011xParams       Pointer to the structure for this device instance
   portNumber         LAN port number
   queueNumber        Queue number
   thresholdMode      Enables/disables the dropping of packets once granule
                      threshold has been reached.
   granuleThreshold   Granule threshold in queue

 Outputs:
   None

 Returns:
  zlStatusE

 Remarks:
   None
*******************************************************************************/
zlStatusE  zl5011xPkqConfigureQueue(zl5011xParamsS *zl5011xParams,
                                   Uint8T portNumber,
                                   Uint8T queueNumber,
                                   zl5011xBooleanE thresholdMode,
                                   Uint32T granuleThreshold)
{
   zlStatusE status = ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_PKQ_FN_ID, "zl5011xPkqConfigureQueue: Port %ld, Queue %ld, Threshold Mode %ld, Granule Threshold %ld",
         portNumber, queueNumber, thresholdMode, granuleThreshold, 0, 0);

   if (status == ZL5011X_OK)
   {
      /* check queue number is in range */
      if (queueNumber >= ZL5011X_PKQ_NUM_QUEUES)
      {
         status= ZL5011X_PARAMETER_INVALID;
      }
   }

   if (status == ZL5011X_OK)
   {
      /* check port number is in range */
      if (portNumber >= ZL5011X_MAX_NUM_LAN_PORTS)
      {
         status= ZL5011X_PARAMETER_INVALID;
      }
   }

   if (status == ZL5011X_OK)
   {
      status = ZL5011X_CHECK_BOOLEAN(thresholdMode);
   }

   if (status == ZL5011X_OK)
   {
      /* Set granule threshold */
      status = zl5011xPkqSetGranuleThreshold(zl5011xParams, portNumber,
            queueNumber, granuleThreshold);

      if (status == ZL5011X_OK)
      {
         /* Set threshold mode */
         status = zl5011xPkqSetThresholdMode(zl5011xParams, portNumber,
               queueNumber, thresholdMode);
      }
   }

   return (status);
}

/*******************************************************************************
 Function:
    zl5011xPkqSetGranuleThreshold

 Description:
   Sets granule threshold for a queue.

 Inputs:
   zl5011xParams          Pointer to the structure for this device instance
   portNumber            LAN port number
   queueNumber           Queue number
   granuleThreshold      Granule threshold of a particular queue

 Outputs:
   None

 Returns:
  zlStatusE