zl5011xinit.c

Zalink50114----TDMoIP芯片驱动源码

      {
         gotDevice = ZL5011X_TRUE;
      }
   }

   /* main function code starts */

   if (status == ZL5011X_OK)
   {
      ZL5011X_TRACE(ZL5011X_INIT_FN_ID,
            "zl5011xWanInit:  if type %d",
            par->ifType, 0, 0, 0, 0, 0);

      /* the memory must be initialised before the WAN is configured */
      if (zl5011xParams->memoryInitialised == ZL5011X_FALSE)
      {
         status = ZL5011X_MEMORY_NOT_INIT;
      }
   }

   if (status == ZL5011X_OK)
   {
      if (zl5011xParams->wanInitialised == ZL5011X_TRUE)
      {
         status = ZL5011X_MULTIPLE_INIT_ATTEMPT;
      }
   }

   /* initialise the WAN blocks - note that the memory must be active before
      initialising the PLA */
   if (status == ZL5011X_OK)
   {
      status = zl5011xInitBlocks(zl5011xParams, ZL5011X_ADM_TIF_BIT | ZL5011X_ADM_TFM_BIT |
            ZL5011X_ADM_TFQ_BIT | ZL5011X_ADM_PAC_BIT | ZL5011X_ADM_PLA_BIT);
   }

   /* initialise the TIF block, and set the interface type. This sets the number of
      streams etc. and must be done before the TFM, TFQ. */
   if (status == ZL5011X_OK)
   {
      status = zl5011xTifInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xTifSetInterfaceType(zl5011xParams, par->ifType, par->liuFreq, par->liuFreqHz);
   }

   /* initialise the other WAN blocks */
   if (status == ZL5011X_OK)
   {
      status = zl5011xTfmInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xTfqInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xTfqSetGranuleUsage(zl5011xParams, par->txQueueMaxNumberOfGranules);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPacInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPlaInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      zl5011xParams->wanInitialised = ZL5011X_TRUE;

      for (loop = 0; loop < ZL5011X_MAX_NUMBER_CONTEXTS; loop++)
      {
         zl5011xParams->wanIf.txQueue[loop].queueInitialised = ZL5011X_FALSE;
      }
   }

   if (gotDevice == ZL5011X_TRUE)
   {
      if (status == ZL5011X_OK)
      {
         status = zl5011xReleaseDevice(zl5011xParams);
      }
      else
      {
         /* already have an error code, so don't overwrite it */
         (void)zl5011xReleaseDevice(zl5011xParams);
      }
   }

   return status;
}

/*******************************************************************************

 Function:
    zl5011xLanInitStructInit

 Description:
   Initialises structure used by zl5011xLanInit function.

 Inputs:
   zl5011xParams   Pointer to the structure for this device instance
   par            Pointer to the structure for configuration items.
                  See main function

 Returns:
   zlStatusE

 Remarks:
    None

*******************************************************************************/

zlStatusE zl5011xLanInitStructInit(zl5011xParamsS *zl5011xParams, zl5011xLanInitS *par)
{
   zlStatusE status = ZL5011X_OK;

   if (status == ZL5011X_OK)
   {
      ZL5011X_TRACE(ZL5011X_INIT_FN_ID, "zl5011xLanInitStructInit: ", 0, 0, 0, 0, 0, 0);

      par->maxPacketQueueGranules = (Uint32T)ZL5011X_INVALID;
      par->rtpInterruptPeriodMs = 5;
      par->osExclusionEnable = ZL5011X_TRUE;

      par->unmatchedProtocolLoopback = ZL5011X_FALSE;
      par->packetLoopbackConfig.protocolType = ZL5011X_LOOPBACK_ETHERNET;
      par->packetLoopbackConfig.header = NULL;
      par->packetLoopbackConfig.portNum = (Uint8T)ZL5011X_INVALID;
      par->packetLoopbackConfig.queueNum = (Uint8T)ZL5011X_INVALID;
      par->packetLoopbackConfig.enableVlan = ZL5011X_FALSE;
      par->packetLoopbackConfig.ethernetSrcAddressFromMac = ZL5011X_TRUE;
   }

   return status;
}

/*******************************************************************************

 Function:
    zl5011xLanInit

 Description:
   This function initialises the LAN interface blocks. The Tx low headers are
   setup and the queues initialised. Sets the frequency of the RTP interrupt.
   This function does not configure the actual Lan ports. The ports can be
   configured after this function has been run.
   There are several functions used to configure the device from reset. They
   are shown below, and must be called in this sequence, in order to enable the
   device.
      zl5011xInit
      zl5011xConfigureMemory
      zl5011xWanInit
      zl5011xLanInit
      zl5011xRun

 Inputs:
   zl5011xParams   Pointer to the structure for this device instance
   par            Pointer to the structure for configuration items. See below:

 Structure inputs:
   maxPacketQueueGranules  maximum number of granules to use for the packet
                           queues
   rtpInterruptPeriodMs    the minimum time between RTP interrupts in
                           milli-seconds
   unmatchedProtocolLoopback  set to ZL5011X_TRUE to configure loopback for
                           any packets that fail the packet Rx protocol
                           match.
   packetLoopbackConfig    configuration for the header to be attached to the
                           loopback packets. The three types of header are :-
                           ETHERNET - replaces the src and dest MAC addresses
                           IP_UDP - adds an extra ethernet->IPv4->UDP header
                           MPLS - adds an extra ethernet->MPLS header
   osExclusionEnable       ZL5011X_TRUE to enable OS exclusion

 Structure outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   The RTP interrupt is enabled from the block, but not from the device (the
   interrupt needs to be enabled at the top level).
   It is probably not desirable to have all packets looped back before the
   active contexts etc. have been programmed, so this function only configures
   the loopback and does NOT enable it. The loopback can be enabled / disabled
   by calling zl5011xPacketLoopbackControl.

*******************************************************************************/

zlStatusE zl5011xLanInit(zl5011xParamsS *zl5011xParams, zl5011xLanInitS *par)
{
   zlStatusE status = ZL5011X_OK;
   zl5011xBooleanE gotDevice = ZL5011X_FALSE;

   /* do some parameter checking */
   status = ZL5011X_CHECK_POINTERS(zl5011xParams, par);

   if ((status == ZL5011X_OK) && (par->osExclusionEnable == ZL5011X_TRUE))
   {
      /* get access to the device */
      status = zl5011xGetDevice(zl5011xParams, ZL5011X_GET_DEVICE_TIMEOUT_MODE);

      if (status == ZL5011X_OK)
      {
         gotDevice = ZL5011X_TRUE;
      }
   }

   /* main function code starts */

   if (status == ZL5011X_OK)
   {
      ZL5011X_TRACE(ZL5011X_INIT_FN_ID,
            "zl5011xLanInit: ",
            0, 0, 0, 0, 0, 0);

      /* the WAN must be initialised before the LAN is configured */
      if (zl5011xParams->wanInitialised == ZL5011X_FALSE)
      {
         status = ZL5011X_WAN_NOT_INIT;
      }
   }

   if (status == ZL5011X_OK)
   {
      if (zl5011xParams->lanInitialised == ZL5011X_TRUE)
      {
         status = ZL5011X_MULTIPLE_INIT_ATTEMPT;
      }
   }

   /* initialise the LAN blocks - PKQ and PTX do not have initialisation bits */
   if (status == ZL5011X_OK)
   {
      status = zl5011xInitBlocks(zl5011xParams, ZL5011X_ADM_PKI_BIT | ZL5011X_ADM_PRX_BIT |
            ZL5011X_ADM_PKC_BIT | ZL5011X_ADM_RTP_BIT);
   }

   /* enable the PTX block, this does not have an init, and needs to be run
      before it can be accessed */
   if (status == ZL5011X_OK)
   {
      status = zl5011xAdmEnableBlocks(zl5011xParams, ZL5011X_ADM_PTX_BIT);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPkiInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPkcInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPrxInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xPtxInit(zl5011xParams);
   }

   /* configure the PTX - ethernet and IP header generation */
   if (status == ZL5011X_OK)
   {
      status = zl5011xPtxConfigure(zl5011xParams);
   }

   /* PKQ initialisation */
   if (status == ZL5011X_OK)
   {
      status = zl5011xPkqInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      /* if the value has been set by the calling function then make the call */
      if (par->maxPacketQueueGranules != (Uint32T)ZL5011X_INVALID)
      {
         status = zl5011xPkqSetTotalGranuleThreshold(zl5011xParams,
               par->maxPacketQueueGranules);
      }
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xRtpInit(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xRtpSetInterruptPeriod(zl5011xParams, par->rtpInterruptPeriodMs);
   }

   if (status == ZL5011X_OK)
   {
      status = zl5011xRtpConfigure(zl5011xParams,
            ZL5011X_RTP_STATS_BASE, ZL5011X_RTP_HEADER_BASE);
   }

   if (par->unmatchedProtocolLoopback == ZL5011X_TRUE)
   {
      /* set up the packet Tx header first */
      if (status == ZL5011X_OK)
      {
         if (par->packetLoopbackConfig.header == NULL)
         {
            status = ZL5011X_PARAMETER_INVALID;
         }
         else
         {
            status = zl5011xPacketTxLoopback(zl5011xParams, &(par->packetLoopbackConfig));
         }
      }

      /* set up the packet Rx for unmatched packets */
      if (status == ZL5011X_OK)
      {
         status = zl5011xPacketRxLoopback(zl5011xParams, &(par->packetLoopbackConfig),
               par->unmatchedProtocolLoopback);
      }

      if (status == ZL5011X_OK)
      {
         zl5011xParams->packetIf.unmatchedProtocolLoopback = par->unmatchedProtocolLoopback;
      }
   }

   if (status == ZL5011X_OK)
   {
      zl5011xParams->lanInitialised = ZL5011X_TRUE;
   }

   if (gotDevice == ZL5011X_TRUE)
   {
      if (status == ZL5011X_OK)
      {
         status = zl5011xReleaseDevice(zl5011xParams);
      }
      else
      {
         /* already have an error code, so don't overwrite it */
         (void)zl5011xReleaseDevice(zl5011xParams);
      }
   }

   return status;
}

/*******************************************************************************

 Function:
    zl5011xRunStructInit

 Description:
   Initialises structure used by zl5011xRun function.

 Inputs:
   zl5011xParams   Pointer to the structure for this device instance
   par            Pointer to the structure for configuration items.
                  See main function

 Returns:
   zlStatusE

 Remarks:
    None

*******************************************************************************/

zlStatusE zl5011xRunStructInit(zl5011xParamsS *zl5011xParams, zl5011xRunS *par)
{
   zlStatusE status = ZL5011X_OK;

   if (status == ZL5011X_OK)
   {
      ZL5011X_TRACE(ZL5011X_INIT_FN_ID, "zl5011xRunStructInit: ", 0, 0, 0, 0, 0, 0);

      par->osExclusionEnable = ZL5011X_TRUE;
   }

   return status;
}

/*******************************************************************************

 Function:
    zl5011xRun

 Description:
   This function is the last stage of the initialisation sequence. If all of the
   other initialisation functions has completed successfully, then the blocks are
   put into run mode.
   There are several functions used to configure the device from reset. They
   are shown below, and must be called in this sequence, in order to enable the
   device.
      zl5011xInit
      zl5011xConfigureMemory
      zl5011xWanInit
      zl5011xLanInit