zl5011xtif.c

Zalink50114----TDMoIP芯片驱动源码

/*******************************************************************************
*
*  File name:              zl5011xTif.c
*
*  Version:                33
*
*  Author:                 MRC
*
*  Date created:           08/02/2002
*
*  Copyright 2002, 2003, 2004, 2005, Zarlink Semiconductor Limited.
*  All rights reserved.
*
*  Module Description:
*
*  This file contains all the functions that are used to control the TDM
*  interface part of the device.
*     Sets clock polarities and general operating mode.
*
*  Revision History:
*
*  Rev:  Date:       Author:  Comments:
*  1     08/02/2002  MRC      Creation
*  2     15/02/2002  MRC      Pass device structure to read / write fns
*  3     28/02/2002  MRC      Checked and quick test
*  4     08/03/2002  MRC      Update
*  5     19/03/2002  MRC      Update
*  6     27/03/2002  MRC      Stores settings in the device structure
*  7     27/03/2002  MRC      ReadModWrite parameter order changed.
*  8     28/03/2002  MRC      Now use 8 bit rather than 32 bit locals for
*                             stream num etc.
*  9     09/04/2002  MRC      Changes to TIF frame type block.
*  10    17/04/2002  MRC      Changed the CHECK_.. macros to ZL5011X_CHECK_..
*  11    30/04/2002  MRC      Made a fix to allow the init function to
*                             initialise all of the streams.
*  12    16/05/2002  MRC      Added channel enable function
*  13    29/05/2002  MRC      Added bit order control
*  14    31/05/2002  MRC      Added tri-state control during device init
*  15    19/06/2002  MRC      TIF now starts in DPLL slave mode (backplane)
*  16    20/06/2002  MRC      Changed interface type enum names following review
*  17    09/07/2002  MRC      Added LIU value to set interface fn and added BER
*                             functions.
*  18    26/07/2002  MRC      Fixed bit stuffing function
*  19    14/08/2002  MRC      Added control for sample point - 3/4 and x1 clock
*  20    03/10/2002  JFE      Fixed ZL5011X_TRACE without : following function name.
*  21    30/10/2002  MRC      Updated to allow variants
*  22    31/10/2002  MRC      Added variants + minor fixes
*  23    05/11/2002  MRC      Added check to ensure that streams are valid in
*                             zl5011xTifSetInterfaceType
*  24    06/11/2002  MRC      Modified check in zl5011xTifSetInterfaceType,
*                             since TDM is not valid in one of the variants
*  25    29/07/2003  APL      Renamed global wanLimits structure to devLimits
*  26    13/02/2004  APL      Updated function header descriptions for BER receiver
*  27    23/07/2004  MRC      Fixed some compiler warnings
*  28    29/07/2004  MRC      Fixed some compiler warnings
*  29    19/08/2004  MRC      Added user defined LIU frequency setting
*  30    16/11/2004  MRC      Added individual stream frequency control
*  31    21/01/2005  MRC      Updated for non CES operation
*  32    28/01/2005  MRC      Updated stream enable for non CES stream
*  33    03/02/2005  APL      Renamed device ID's to allow new family members
*
*******************************************************************************/

/*****************   INCLUDE FILES                *****************************/

#include "zl5011x.h"
#include "zl5011xTif.h"
#include "zl5011xTifMap.h"
#include "zl5011xUtilLib.h"

/*****************   EXPORTED GLOBAL VARIABLES    *****************************/

/*****************   STATIC GLOBAL VARIABLES      *****************************/

/*****************   STATIC FUNCTION DECLARATIONS *****************************/

/******************************************************************************/

/*******************************************************************************

 Function:
   zl5011xTifInit

 Description:
   This function initialises the device, tri-stating the TDM outputs and
   initialising the clock polarities.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifInit(zl5011xParamsS *zl5011xParams)
{
   Uint8T loop;
   zlStatusE status = ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifInit:", 0, 0, 0, 0, 0, 0);

   status = zl5011xTifControlOutputs(zl5011xParams, ZL5011X_WAN_OUTPUT_HIZ);

   if (status == ZL5011X_OK)
   {
      /* temporarily set the number of streams to the maximum, to allow the
         chip to be initialised */
      zl5011xParams->wanIf.wanNumStreams = ZL5011X_MAX_NUMBER_STREAMS;

      for (loop = 0; loop < ZL5011X_MAX_NUMBER_STREAMS; loop++)
      {
         status = zl5011xTifSetInputClockPolarity(zl5011xParams, loop, ZL5011X_NEGATIVE);
         if (status != ZL5011X_OK)
            break;

         status = zl5011xTifSetOutputClockPolarity(zl5011xParams, loop, ZL5011X_POSITIVE);
         if (status != ZL5011X_OK)
            break;
      }
   }

   if (status == ZL5011X_OK)
   {
      status =  zl5011xTifBerDisableGenerator(zl5011xParams);
   }

   if (status == ZL5011X_OK)
   {
      status =  zl5011xTifBerDisableReceiver(zl5011xParams);
   }

   /* reset the number of streams / channels that are available */
   zl5011xParams->wanIf.wanNumStreams = 0;
   zl5011xParams->wanIf.wanNumChannels = 0;

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifControlOutputs

 Description:
   Controls the tri-state for the TDM outputs.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   outputState       Controls the tri-state for the TDM outputs

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifControlOutputs(zl5011xParamsS *zl5011xParams,
      zl5011xWanIfOutputEnableE outputState)
{
   Uint32T bit, bitMask;
   zlStatusE status =  ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifControlOutputs: %d",
         outputState, 0, 0, 0, 0, 0);

   status = ZL5011X_CHECK_WAN_IF_OUTPUT_ENABLE(outputState);

   if (status == ZL5011X_OK)
   {
      bit = (Uint32T)outputState << ZL5011X_TIF_OUTPUT_ENABLE_BIT;
      bitMask = ZL5011X_1BIT_MASK << ZL5011X_TIF_OUTPUT_ENABLE_BIT;

      status = zl5011xUpdateRegisters(zl5011xParams, ZL5011X_TIF_CTRL_REG,
               &zl5011xParams->wanIf.wanIfControl, bit, bitMask);

      zl5011xParams->wanIf.outputEnable = outputState;
   }

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifSetFramePulseType

 Description:
   Sets the frame pulse type to use for framed TDM.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   pulseType         Configures the frame pulse type for framed TDM.

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifSetFramePulseType(zl5011xParamsS *zl5011xParams,
      zl5011xWanIfFramePulseTypeE pulseType)
{
   Uint32T bit, bitMask;
   zlStatusE status =  ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifSetFramePulseType: %d",
         pulseType, 0, 0, 0, 0, 0);

   status = ZL5011X_CHECK_WAN_IF_FRAME_PULSE_TYPE(pulseType);

   if (status == ZL5011X_OK)
   {
      bit =  (Uint32T)pulseType << ZL5011X_TIF_FRAME_PULSE_BITS;
      bitMask  = ZL5011X_TIF_FRAME_PULSE_MASK << ZL5011X_TIF_FRAME_PULSE_BITS;

      zl5011xParams->wanIf.framePulseWidth = pulseType;

      status = zl5011xUpdateRegisters(zl5011xParams, ZL5011X_TIF_CTRL_REG,
               &zl5011xParams->wanIf.wanIfControl, bit, bitMask);
   }

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifSetFramePolarity

 Description:
   Sets the polarity to be used for the frame pulse.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   polarity          Configures the polarity of the frame pulse for framed TDM.

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifSetFramePolarity(zl5011xParamsS *zl5011xParams,
      zl5011xPolarityE polarity)
{
   Uint32T bit, bitMask;
   zlStatusE status =  ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifSetFramePolarity: %d",
         polarity, 0, 0, 0, 0, 0);

   status = ZL5011X_CHECK_POLARITY(polarity);

   if (status == ZL5011X_OK)
   {
      bit = (Uint32T)polarity <<  ZL5011X_TIF_FRAME_POL_BIT;
      bitMask = ZL5011X_1BIT_MASK << ZL5011X_TIF_FRAME_POL_BIT;

      zl5011xParams->wanIf.framePulsePolarity = polarity;

      status = zl5011xUpdateRegisters(zl5011xParams, ZL5011X_TIF_CTRL_REG,
               &zl5011xParams->wanIf.wanIfControl, bit, bitMask);
   }

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifSetDataSampleMode

 Description:
   Sets the sample point for Rx TDM data.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   sampleMode        Configures the sampling point for TDM input.

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifSetDataSampleMode(zl5011xParamsS *zl5011xParams,
      zl5011xWanIfSamplePointE sampleMode)
{
   Uint32T bits, bitMask;
   zlStatusE status =  ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifSetDataSampleMode: %d",
         sampleMode, 0, 0, 0, 0, 0);

   status = ZL5011X_CHECK_WAN_IF_SAMPLE_POINT(sampleMode);

   if (status == ZL5011X_OK)
   {
      bits = (Uint32T)sampleMode <<  ZL5011X_TIF_SAMPLING_BITS;
      bitMask = (ZL5011X_TIF_SAMPLING_MASK << ZL5011X_TIF_SAMPLING_BITS) |
            (ZL5011X_1BIT_MASK << ZL5011X_TIF_SAMPLE_CLOCK_BIT) |
            (ZL5011X_1BIT_MASK << ZL5011X_TIF_SYSTEM_CLOCK_BIT);

      /* if setting up a 3/4 sample point and using x1 clock, then must
         set the async clocking mode */
      if ((sampleMode == ZL5011X_WAN_SAMPLE_THREE_QUARTER_BIT) &&
         (zl5011xParams->wanIf.wanClockMultiply == ZL5011X_WAN_CLK_DATA_RATE))
      {
         bits |= ZL5011X_1BIT_MASK << ZL5011X_TIF_SAMPLE_CLOCK_BIT;

         /* since the system clock is used for this approximation, need to
            set a bit to indicate the system clock frequency */
         if (zl5011xParams->systemClockFreq > ZL5011X_TIF_HIGH_SYS_CLOCK_FREQ)
         {
            bits |= ZL5011X_1BIT_MASK << ZL5011X_TIF_SYSTEM_CLOCK_BIT;
         }
      }

      status = zl5011xUpdateRegisters(zl5011xParams, ZL5011X_TIF_CTRL_REG,
               &zl5011xParams->wanIf.wanIfControl, bits, bitMask);
   }

   zl5011xParams->wanIf.wanSampleMode = sampleMode;

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifSetClockRate

 Description:
   Sets the clock multiply bit - i.e. clock can be 1x or 2x data rate.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   clockRate         selects the TDM clock multiply mode

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None

*******************************************************************************/

zlStatusE zl5011xTifSetClockRate(zl5011xParamsS *zl5011xParams,
      zl5011xWanIfClockRateE clockRate)
{
   Uint32T bit, bitMask;
   zlStatusE status =  ZL5011X_OK;

   ZL5011X_TRACE(ZL5011X_TIF_FN_ID, "zl5011xTifSetClockRate: %d",
         clockRate, 0, 0, 0, 0, 0);

   status = ZL5011X_CHECK_WAN_IF_CLOCK_RATE(clockRate);

   if (status == ZL5011X_OK)
   {
      bit = (Uint32T)clockRate <<  ZL5011X_TIF_CLK_MULTIPLY_BIT;
      bitMask = ZL5011X_1BIT_MASK << ZL5011X_TIF_CLK_MULTIPLY_BIT;

      status = zl5011xUpdateRegisters(zl5011xParams, ZL5011X_TIF_CTRL_REG,
               &zl5011xParams->wanIf.wanIfControl, bit, bitMask);

      zl5011xParams->wanIf.wanClockMultiply = clockRate;
   }

   return(status);
}

/*******************************************************************************

 Function:
   zl5011xTifSetDataRate

 Description:
   Sets the data rate for the TDM streams.

 Inputs:
   zl5011xParams      Pointer to the structure for this device instance
   dataRate          selects the TDM data rate

 Outputs:
   None

 Returns:
   zlStatusE

 Remarks:
   None