zl5011xadm.h

Zalink50114----TDMoIP芯片驱动源码

/*******************************************************************************
*
*  File name:              zl5011xAdm.h
*
*  Version:                28
*
*  Author:                 LCW
*
*  Date created:           21/03/02
*
*  Copyright 2002, 2003, 2004, 2005, Zarlink Semiconductor Limited.
*  All rights reserved.
*
*  Module Description:
*
*  This is the header file for the ADM block.
*  It contains the function prototypes and any definitions.
*
*  Revision History:
*
*  Rev:  Date:       Author:  Comments:
*  1     22/03/02    LCW      Created.
*  2     26/03/02    LCW      Minor mods.
*  3     27/03/02    LCW      Minor mods.
*  4     28/03/02    LCW      Minor mods.
*  5     03/04/02    LCW      Minor mods.
*  6     03/04/02    LCW      Minor mods.
*  7     03/04/02    LCW      Minor mods.
*  8     11/04/02    LCW      Minor mods.
*  9     15/04/02    LCW      Prepared for code review.
*  10    17/04/02    LCW      Code review actions.
*  11    18/04/02    LCW      Code review actions.
*  12    18/04/02    LCW      Changed interrupt & enable constants and
*                                 registers.
*  13    18/04/02    LCW      Minor mods.
*  14    19/04/02    LCW      Minor mods.
*  15    23/04/02    LCW      Code review actions.
*  16    24/04/02    LCW      Code review actions.
*  17    26/04/02    LCW      Added function prototype for
*                                 zl5011xAdmSetInitStatus
*  18    19/04/02    LCW      Minor mods.
*  19    24/04/02    LCW      Code review actions.
*  20    07/06/02    LCW      Added zl5011xAdmGetInterruptStatus.
*  21    12/07/02    MRC      Interrupt bits changed
*  22    26/09/02    DJA      zl5011xGetBootStrapMode renamed to
*                             zl5011xAdmGetBootStrapMode
*  23    01/10/02    DJA      unwanted #def ZL5011X_INT_RTP_BIT
*  24    30/10/02    MRC      Updated the device ID function to split out the
*                             version ID
*  25    31/10/2002  MRC      Added variants + minor fixes
*  26    09/12/2002  MRC      Added TM init / run bit
*  27    07/08/2003  APL      Restricted which enable bits are valid for ZL50130 device
*  28    28/01/2005  MRC      Added mask for the GPIO write functions
*
*******************************************************************************/

#ifndef _ZL5011X_ADM_H_
#define _ZL5011X_ADM_H_

#ifdef __cplusplus
extern "C" {
#endif

/*****************   DATA TYPES   *********************************************/

/*****************   # DEFINES   **********************************************/
#define  ZL5011X_ADM_RESET_KEY             0xBA0A537D
#define  ZL5011X_ADM_SET_FREEZE            0x00000001
#define  ZL5011X_ADM_GPIO_PINS_OUT         0xFFFFFFFF

/* The following constants define the bits used to initialise blocks */
#define  ZL5011X_ADM_TFM_BIT          ZL5011X_1BIT_MASK
#define  ZL5011X_ADM_TFQ_BIT          (ZL5011X_1BIT_MASK << 1)
#define  ZL5011X_ADM_PLA_BIT          (ZL5011X_1BIT_MASK << 2)
#define  ZL5011X_ADM_RTP_BIT          (ZL5011X_1BIT_MASK << 3)
#define  ZL5011X_ADM_TIF_BIT          (ZL5011X_1BIT_MASK << 5)
#define  ZL5011X_ADM_PAC_BIT          (ZL5011X_1BIT_MASK << 6)
#define  ZL5011X_ADM_PKI_BIT          (ZL5011X_1BIT_MASK << 8)
#define  ZL5011X_ADM_PKQ_BIT          (ZL5011X_1BIT_MASK << 9)
#define  ZL5011X_ADM_PKC_BIT          (ZL5011X_1BIT_MASK << 10)
#define  ZL5011X_ADM_TM_BIT           (ZL5011X_1BIT_MASK << 11)
#define  ZL5011X_ADM_PRX_BIT          (ZL5011X_1BIT_MASK << 12)
#define  ZL5011X_ADM_PTX_BIT          (ZL5011X_1BIT_MASK << 13) /*Not used for
                                                             initialisation*/
#define  ZL5011X_ADM_GM_BIT           (ZL5011X_1BIT_MASK << 14)

/* Blocks which need initialisation must always be initialised , even if they are not used.
   Don't initialise TDM nor PTX */
#define  ZL5011X_ADM_INIT_ALL_BLOCKS   (ZL5011X_ADM_RTP_BIT | ZL5011X_ADM_GM_BIT  | \
                                      ZL5011X_ADM_TFM_BIT | ZL5011X_ADM_TFQ_BIT | ZL5011X_ADM_PLA_BIT | \
                                      ZL5011X_ADM_TIF_BIT | ZL5011X_ADM_PAC_BIT | \
                                      ZL5011X_ADM_PKI_BIT | ZL5011X_ADM_PKQ_BIT | ZL5011X_ADM_PKC_BIT | \
                                      ZL5011X_ADM_PRX_BIT )   /* 0x576F in hex */

#define  ZL5011X_ADM_ENABLE_ALL_BLOCKS (ZL5011X_ADM_RTP_BIT | ZL5011X_ADM_GM_BIT  | ZL5011X_ADM_TM_BIT  | \
                                      ZL5011X_ADM_TFM_BIT | ZL5011X_ADM_TFQ_BIT | ZL5011X_ADM_PLA_BIT | \
                                      ZL5011X_ADM_TIF_BIT | ZL5011X_ADM_PAC_BIT | \
                                      ZL5011X_ADM_PKI_BIT | ZL5011X_ADM_PKQ_BIT | ZL5011X_ADM_PKC_BIT | \
                                      ZL5011X_ADM_PRX_BIT | ZL5011X_ADM_PTX_BIT ) /* 0x7F6F in hex */

/* Check masks to ensure only valid bits written to the registers */
#define  ZL5011X_ADM_INIT_CHECK_MASK       ZL5011X_ADM_INIT_ALL_BLOCKS
#define  ZL5011X_ADM_ENABLE_CHECK_MASK     ZL5011X_ADM_ENABLE_ALL_BLOCKS
#define  ZL5011X_ADM_BIT_CHECK             0x0000FFFF
#define  ZL5011X_ADM_BOOTSTRAP_MASK        0x0000FFFF
#define  ZL5011X_ADM_CONSTAT_MASK          0x00000003

/* The following constants define the interrupt sources */
#define  ZL5011X_ADM_INTERRUPT_CHECK_MASK  0x007FFFFF


/*****************   INCLUDE FILES   ******************************************/

/*****************   DATA STRUCTURES   ****************************************/
/*****************   EXPORTED GLOBAL VARIABLE DECLARATIONS   ******************/


/*****************   EXTERNAL FUNCTION DECLARATIONS   *************************/

zlStatusE  zl5011xAdmInit(zl5011xParamsS *zl5011xParams);

zlStatusE  zl5011xAdmSetInitStatus(zl5011xParamsS *zl5011xParams,
      Uint32T blockMask);

zlStatusE  zl5011xAdmGetInitStatus(zl5011xParamsS *zl5011xParams,
      Uint32T *blockInitStatus);

zlStatusE zl5011xAdmResetDevice(zl5011xParamsS *zl5011xParams);

zlStatusE zl5011xAdmInitiateFreeze(zl5011xParamsS *zl5011xParams);

zlStatusE zl5011xAdmGetFreezeState(zl5011xParamsS *zl5011xParams,
      zl5011xBooleanE *freezeState);

zlStatusE zl5011xAdmEnableBlocks(zl5011xParamsS *zl5011xParams,
      Uint32T enableBlocks);

zlStatusE zl5011xAdmEnableInterrupt(zl5011xParamsS *zl5011xParams,
      zl5011xEnableInterruptE enableInterruptMask);

zlStatusE zl5011xAdmDisableInterrupt(zl5011xParamsS *zl5011xParams,
      zl5011xEnableInterruptE interrupt);

zlStatusE zl5011xAdmEnableInterruptSource(zl5011xParamsS *zl5011xParams,
      zl5011xInterruptValueE interrupt, Uint32T interruptSourceMask);

zlStatusE zl5011xAdmClearInterruptSource(zl5011xParamsS *zl5011xParams,
      Uint32T interruptClearMask);

zlStatusE zl5011xAdmDisableInterruptSource(zl5011xParamsS *zl5011xParams,
      zl5011xInterruptValueE interrupt, Uint32T interruptSourceMask);

zlStatusE zl5011xAdmGetInterruptStatus(zl5011xParamsS *zl5011xParams,
      Uint32T *interruptStatusBits);

zlStatusE zl5011xAdmGetDeviceId(zl5011xParamsS *zl5011xParams,
      Uint32T *chipId, Uint32T *version);

zlStatusE zl5011xAdmGpioRead(zl5011xParamsS *zl5011xParams,
      Uint32T *gpio);

zlStatusE zl5011xAdmGpioWrite(zl5011xParamsS *zl5011xParams,
      Uint16T gpioWriteValue, Uint16T mask);

zlStatusE zl5011xAdmGpioMode(zl5011xParamsS *zl5011xParams,
      Uint16T gpioPins, Uint16T mask);

zlStatusE zl5011xAdmGetBootStrapMode(zl5011xParamsS *zl5011xParams,
      Uint16T *bootStrapMode);


#ifdef __cplusplus
}
#endif

#endif /* _ZL5011X_ADM_H_ */