设备变动_设备革新查询条件.frm

新世纪ERP设备管理源代码

    '查询条件窗体卸载时判断是否因为结果窗体卸载,如是则卸载,否则隐藏
    If UnloadCheck.Value <> 1 Then
        Cancel = 1
        Me.Hide
    End If

End Sub

Private Sub QdCommand_Click()                                   '确 定

    '录入条件有效性判断(Fixed)
    If Not Lrtjyxxpd Then
        Exit Sub
    End If
    Me.Hide
        
    '[>>激活查询过程结果窗体
    Dev_ChangeAddListForm.Timer1.Enabled = True
    Dev_ChangeAddListForm.SetFocus
    '<<]

End Sub

Private Sub QxCommand_Click()                                    '取消(Fixed)
    Me.Hide
End Sub

Private Function Lrtjyxxpd() As Boolean                          '用户录入条件有效性判断
 
    Dim jsqte As Integer
    Lrtjyxxpd = False
 
    '对需要进行事后判断的文本框录入内容进行有效性判断 (Fixed)
    For jsqte = 0 To Max_Text_Index
        If Textint(jsqte, 9) = 0 Or Textint(jsqte, 9) = 2 Then
            If Not TextYxxpd(jsqte) Then
                Exit Function
            End If
        End If
    Next jsqte
   
    '[>>以下为依据实际情况自定义部分
 
    '查询日期范围应由小到大
    
  
    '<<]以上为依据实际情况自定义部分
 
    Lrtjyxxpd = True
End Function

Private Sub Cmd_Clear_MouseDown(Button As Integer, Shift As Integer, x As Single, y As Single)    '将用户输入条件全部清除(可选)

    '清除文本框(Fixed)
    For jsqte = 0 To Max_Text_Index
        LrText(jsqte).Tag = ""
        LrText(jsqte).Text = ""
    Next jsqte
  
    '[>>
      
    '此处可以写入其他清除条件程序
  
    '<<]
  
End Sub

'*************以下为文本框录入处理程序(固定不变部分)*************'

Private Sub Wbklrwbcl(Index As Integer)    '文本框录入事后处理程序
  
    '以下为依据实际情况自定义部分[
  
    '在此填写文本框录入事后处理程序
   
    ']以上为依据实际情况自定义部分
  
End Sub

Private Sub LrText_Change(Index As Integer)
    
    '屏蔽程序改变控制
    If TextChangeLock Then
        Exit Sub
    End If
    
    TextValiJudgeLock(Index) = False    '打开有效性判断锁
    
    '限制字段录入长度
          
    TextChangeLock = True  '加锁(防止执行Lrtext_Change)
    Call TextChangeLimit(LrText(Index), Textint(Index, 1))  '去掉无效字符
    Select Case Textint(Index, 1)
        Case 8, 11      '金额型
            Call Sjgskz(LrText(Index), Xtjezws - Xtjexsws - 1, Xtjexsws)
        Case 9, 12      '数量型
            Call Sjgskz(LrText(Index), Xtslzws - Xtslxsws - 1, Xtslxsws)
        Case 10          '单价型
            Call Sjgskz(LrText(Index), Xtdjzws - Xtdjxsws - 1, Xtdjxsws)
        Case Else        '其他小数类型控制
            If Textint(Index, 6) <> 0 Or Textint(Index, 7) <> 0 Then
                Call Sjgskz(LrText(Index), Textint(Index, 6), Textint(Index, 7))
            End If
    End Select
        
    TextChangeLock = False '解锁

End Sub

Private Sub LrText_GotFocus(Index As Integer)                                                 '文本框得到焦点,显示相应信息
    
    Call TextShow(Index)
    CurTextIndex = Index
    LrText(Index).SelStart = Len(LrText(Index))

End Sub

Private Sub LrText_KeyDown(Index As Integer, KeyCode As Integer, Shift As Integer)            '字段按F2键提供帮助
    
    Select Case KeyCode
        Case vbKeyF2
            Call Text_Help(Index)
    End Select

End Sub

Private Sub LrText_KeyPress(Index As Integer, KeyAscii As Integer)                            '文本框录入事中控制
    Call InputFieldLimit(LrText(Index), Textint(Index, 1), KeyAscii)
End Sub

Private Sub LrText_LostFocus(Index As Integer)                                                '文本框失去焦点

  '显示相应信息但不能进行有效性判断
  
End Sub

Private Sub Ydcommand1_MouseDown(Index As Integer, Button As Integer, Shift As Integer, x As Single, y As Single)     '按钮提供帮助
    Call Text_Help(Index)
End Sub

Private Sub Text_Help(Index As Integer)                                                       '录入字段帮助
    If Not Textboolean(Index, 1) Then
        Exit Sub
    End If
     
    '调用帮助
    Call Drbmhelp(Textint(Index, 2), Textstr(Index, 4), Trim(LrText(Index).Text))
  
    '根据设置选择显示编码和名称,并进行存储
    If Len(Xtfhcs) <> 0 Then
        If Textint(Index, 3) = 1 Then
            LrText(Index).Text = Xtfhcsfz
            LrText(Index).Tag = Xtfhcs
        Else
            LrText(Index).Text = Xtfhcs
            LrText(Index).Tag = Xtfhcsfz
        End If
    End If
   
    LrText(Index).SetFocus

End Sub

Private Sub TextShow(Index As Integer)        '文本框得到焦点,显示相应信息

  '填写文本框得到焦点,进行相应信息处理程序
   
End Sub

Private Sub Wbkcsh()                          '录入文本框初始化
  
    Dim jsqte As Integer
  
    '最大录入文本框索引值
    Max_Text_Index = Textvar(1)
  
    ReDim TextValiJudgeLock(Max_Text_Index)
    For jsqte = 0 To Max_Text_Index
         
        If Len(Trim(Textstr(jsqte, 1))) <> 0 Then
            If Textboolean(jsqte, 1) Then
                If jsqte <> 0 And Not Textboolean(jsqte, 3) Then
                    Load Ydcommand1(jsqte)
                End If
                Ydcommand1(jsqte).Visible = True
                Ydcommand1(jsqte).Move LrText(jsqte).Left + LrText(jsqte).Width, LrText(jsqte).Top
            End If
            TextChangeLock = True
            LrText(jsqte).Text = ""
            LrText(jsqte).Tag = ""
            If Textint(jsqte, 5) <> 0 Then
                LrText(jsqte).MaxLength = Textint(jsqte, 5)
            End If
            TextChangeLock = False
        End If
     
        TextValiJudgeLock(jsqte) = True
    Next jsqte

End Sub

Private Function TextYxxpd(Index As Integer) As Boolean           '文本框有效性判断
    Dim Sqlstr As String
    Dim Findrec As ADODB.Recordset
  
    '文本框内容未曾改变不进行有效性判断
    If TextValiJudgeLock(Index) Then
        TextYxxpd = True
        Exit Function
    End If
  
    '文本框内容为空认为有效,并清空其Tag值
    If Trim(LrText(Index)) = "" Then
        LrText(Index).Tag = ""
        Call Wbklrwbcl(Index)
        TextValiJudgeLock(Index) = True
        TextYxxpd = True
        Exit Function
    End If
  
    '可在此加入不做有效性判断的理由
  
    Select Case Textint(Index, 4)
        Case 1      '编码型
            Sqlstr = Trim(Textstr(Index, 5))
            Sqlstr = Replace(Sqlstr, "@", "'" + Trim(LrText(Index).Text) + "'")
            Set Findrec = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
            If Findrec.EOF Then
                Call Xtxxts(Trim(Textstr(Index, 6)), 0, 1)
                LrText(Index).SetFocus
                Exit Function
            Else
                Select Case Textint(Index, 3)
                    Case 0
                        If Len(Trim(Textstr(Index, 2))) <> 0 Then
                            LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                        End If
                        If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                            LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                        End If
                    Case 1
                        If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                            LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                        End If
                        If Len(Trim(Textstr(Index, 2))) <> 0 Then
                            LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                        End If
                End Select
            End If
        Case 2      '日期型
            If IsDate(LrText(Index).Text) Then
                LrText(Index).Text = Format(LrText(Index).Text, "yyyy-mm-dd")
                If Val(Mid(LrText(Index), 1, 4)) < 1900 Then
                    LrText(Index).Text = "1900" + Mid(LrText(Index), 5, 6)
                End If
            Else
                Tsxx = "非法公历日期!(格式:" + Format(Date, "yyyy-mm-dd") + ")"
                Call Xtxxts(Tsxx, 0, 1)
                LrText(Index).SetFocus
                Exit Function
            End If
        Case 3      '其他类型
    End Select
    
    '如果有效则加锁,用户不改变内容则不再进行有效性判断
    TextValiJudgeLock(Index) = True

    '调用文本框事后处理程序
    Call Wbklrwbcl(Index)
  
    '有效性判断通过则返回True
    TextYxxpd = True
   
End Function