润滑管理_润滑标准编辑.frm

新世纪ERP设备管理源代码

        End If
        .MoveLast
        Lab_BillId.Caption = .Fields("LubricatefileID")
        Call Sub_ShowBill
    End With

End Sub
    
'[>>===================以下为根据实际业务需要自定义过程区域=============================<<]

'审核,弃审
Private Sub Sub_CheckBill()             '审 核
    '[>>
    
    '此处可以写入禁止单据审核的理由
       
    '<<]
    
    '将单据写入审核标识
    Cw_DataEnvi.DataConnect.Execute ("Update Dev_LubricateFile Set Checker='" & Xtczy & "' Where LubricatefileID=" & Val(Lab_BillId.Caption))
    
    '写入系统操作员
    LrText(12).Text = Xtczy
    
    '设置审核弃审按钮状态
    Call Sub_CheckStatus
    
    '标识单据发生变化
    Bln_BillChange = True

End Sub

Private Sub Sub_AbandonCheck()          '弃 审
   '[>>
    
    '此处可以写入禁止单据弃审的理由
       
    '<<]
   
    '将单据清除审核标识
    Cw_DataEnvi.DataConnect.Execute ("Update Dev_LubricateFile Set Checker='' Where LubricatefileID=" & Val(Lab_BillId.Caption))
    
    '清空单据审核人
    LrText(12).Text = ""
    
    '设置审核弃审按钮状态
    Call Sub_CheckStatus
    
    '标识单据发生变化
    Bln_BillChange = True
  
End Sub

Private Function Fun_AllowEdit() As Boolean                      '判断当前单据是否允许编辑或删除
  
    Dim RecTemp As New ADODB.Recordset     '临时使用动态集
    Fun_AllowEdit = False
    Sqlstr = "Select LubricateFileCode From Dev_LubricateField Where LubricateFileCode='" & Trim(LrText(0).Text) & "'"
    Set RecTemp = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
    With RecTemp
        If Not .EOF Then
            If Trim(.Fields("LubricateFileCode") & "") <> "" Then
                Tsxx = "该标准已用，不能修改或删除!"
                Call Xtxxts(Tsxx, 0, 4)
                Exit Function
            End If
            End If
    End With
    Fun_AllowEdit = True

End Function
'[>>===================以上为根据实际业务需要自定义过程区域=============================<<]

'*****************************以下为文本框录入处理程序(固定不变部分)*******************************'

'************以下为文本框录入处理程序(固定不变部分)*************'
Private Sub Wbklrwbcl(Index As Integer)    '文本框录入事后处理程序
  Dim RecTemp As New ADODB.Recordset
  
    '以下为依据实际情况自定义部分[
  
    '在此填写文本框录入事后处理程序
    Select Case Index
        Case 1
            Sqlstr = "SELECT Dev_Main.*,Gy_Department.DeptName" & _
                " FROM Dev_Main LEFT OUTER JOIN Gy_Department ON Dev_Main.DeptCode = Gy_Department.DeptCode " & _
                " Where DEVID='" & Trim(LrText(1).Text) & "'"
            Set RecTemp = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
            If Not RecTemp.EOF Then
                LrText(2).Text = RecTemp.Fields("Dname")
                LrText(3).Text = RecTemp.Fields("Model")
                LrText(4).Text = RecTemp.Fields("Deptname")
                LrText(4).Tag = RecTemp.Fields("Deptcode")
            End If
        Case 5
            Sqlstr = "SELECT * FROM Dev_LubricateCord Where LubricateCode='" & Trim(LrText(5).Tag) & "'"
            Set RecTemp = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
            If Not RecTemp.EOF Then
                LrText(6).Text = RecTemp.Fields("LubricateModel")
            End If
    End Select
    ']以上为依据实际情况自定义部分
  
End Sub

Private Sub LrText_Change(Index As Integer)
    
    '屏蔽程序改变控制
    If TextChangeLock Then
        Exit Sub
    End If
    
    TextValiJudgeLock(Index) = False    '打开有效性判断锁
    
    '限制字段录入长度
          
    TextChangeLock = True  '加锁(防止执行Lrtext_Change)
    Call TextChangeLimit(LrText(Index), Textint(Index, 1))  '去掉无效字符
    Select Case Textint(Index, 1)
        Case 8, 11      '金额型
            Call Sjgskz(LrText(Index), Xtjezws - Xtjexsws - 1, Xtjexsws)
        Case 9, 12      '数量型
            Call Sjgskz(LrText(Index), Xtslzws - Xtslxsws - 1, Xtslxsws)
        Case 10          '单价型
            Call Sjgskz(LrText(Index), Xtdjzws - Xtdjxsws - 1, Xtdjxsws)
        Case Else        '其他小数类型控制
            If Textint(Index, 6) <> 0 Or Textint(Index, 7) <> 0 Then
                Call Sjgskz(LrText(Index), Textint(Index, 6), Textint(Index, 7))
            End If
    End Select
        
    TextChangeLock = False '解锁

End Sub

Private Sub LrText_GotFocus(Index As Integer)                                                 '文本框得到焦点,显示相应信息
    
    Call TextShow(Index)
    CurTextIndex = Index
    LrText(Index).SelStart = Len(LrText(Index))

End Sub

Private Sub LrText_KeyDown(Index As Integer, KeyCode As Integer, Shift As Integer)            '字段按F2键提供帮助
    
    Select Case KeyCode
        Case vbKeyF2
            Call Text_Help(Index)
    End Select

End Sub

Private Sub LrText_KeyPress(Index As Integer, KeyAscii As Integer)                            '文本框录入事中控制
    Call InputFieldLimit(LrText(Index), Textint(Index, 1), KeyAscii)
End Sub

Private Sub LrText_LostFocus(Index As Integer)                                                '文本框失去焦点

    '显示相应信息但不能进行有效性判断
    Select Case Index
        Case 1
            If Trim(LrText(1).Text) = "" Then
                Exit Sub
            Else
                Call Wbklrwbcl(Index)
            End If
        Case 5
            If Trim(LrText(5).Text) = "" Then
                Exit Sub
            Else
                Call Wbklrwbcl(Index)
            End If
    End Select
End Sub

Private Sub Ydcommand1_MouseDown(Index As Integer, Button As Integer, Shift As Integer, x As Single, y As Single)     '按钮提供帮助

    '文本框处于非录入状态时不允许调入帮助
    If Not LrText(Index).Enabled Then
        Exit Sub
    End If
   
    Call Text_Help(Index)

End Sub

Private Sub Text_Help(Index As Integer)                                                       '录入字段帮助
    
    If Not Textboolean(Index, 1) Then
        Exit Sub
    End If
     
    '调用帮助
    Call Drbmhelp(Textint(Index, 2), Textstr(Index, 4), Trim(LrText(Index).Text))
  
    '根据设置选择显示编码和名称,并进行存储
    If Len(Xtfhcs) <> 0 Then
        If Textint(Index, 3) = 1 Then
            LrText(Index).Text = Xtfhcsfz
            LrText(Index).Tag = Xtfhcs
        Else
            LrText(Index).Text = Xtfhcs
            LrText(Index).Tag = Xtfhcsfz
        End If
    End If
   
    LrText(Index).SetFocus
    
     If Index = 1 And Len(Xtfhcs) <> 0 Then
        Call Wbklrwbcl(Index)
     End If
     If Index = 5 And Len(Xtfhcs) <> 0 Then
        Call Wbklrwbcl(Index)
     End If
    
End Sub

Private Sub TextShow(Index As Integer)        '文本框得到焦点,显示相应信息

    '填写文本框得到焦点,进行相应信息处理程序
   
End Sub

Private Sub Wbkcsh()                          '录入文本框初始化

    Dim Int_TabIndex As Integer         'Tab焦点计数器
  
    '单据录入中文本框焦点由0开始
    LrText(0).TabIndex = 0
  
    '最大录入文本框索引值
    Max_Text_Index = Textvar(1)
  
    ReDim TextValiJudgeLock(Max_Text_Index)
    For jsqte = 0 To Max_Text_Index
        
        '判断此文本框录入索引号是否存在,如存在则对其进行初始化
        If Len(Trim(Textstr(jsqte, 1))) <> 0 Then
        
            '自动装入录入文本框和其解释标签
            If jsqte <> 0 Then
                Load LrText(jsqte)
                Load tsLabel(jsqte)
           
                '判断录入文本框是否显示
                If Textboolean(jsqte, 4) Then
                    LrText(jsqte).Visible = True
                    tsLabel(jsqte).Visible = True
                End If
            
                '判断文本框是否可编辑
                If Textboolean(jsqte, 5) Then
                    LrText(jsqte).Enabled = True
                Else
                    LrText(jsqte).Enabled = False
                End If
                
                 '判断文本框是否提供帮助
                If Textboolean(jsqte, 1) Then
                    If Not Textboolean(jsqte, 3) Then
                        Load Ydcommand1(jsqte)
                    End If
                End If
            End If
           
           '初始化其内容
            TextChangeLock = True
            LrText(jsqte).Text = ""
            LrText(jsqte).Tag = ""
            If Textint(jsqte, 5) <> 0 Then
                LrText(jsqte).MaxLength = Textint(jsqte, 5)
            End If
            TextChangeLock = False
        
            '设置文本框位置及大小,并设置相应标签内容及其位置
            LrText(jsqte).Move Textint(jsqte, 13), Textint(jsqte, 12), Textint(jsqte, 11), Textint(jsqte, 10)
            tsLabel(jsqte).Caption = Textstr(jsqte, 7) & ":"
            tsLabel(jsqte).Move Textint(jsqte, 13) - tsLabel(jsqte).Width - 20, Textint(jsqte, 12) + (Textint(jsqte, 10) - tsLabel(jsqte).Height) / 2 - 30
            
            '判断文本框是否提供帮助
            If Textboolean(jsqte, 1) Then
                Ydcommand1(jsqte).Visible = True
                Ydcommand1(jsqte).Move LrText(jsqte).Left + LrText(jsqte).Width, LrText(jsqte).Top
            End If

            
            
        End If
     
        '将文本框有效性判断进行加锁,在文本框内容发生变化时将锁打开
        TextValiJudgeLock(jsqte) = True
      
    Next jsqte
    
    '设置文本框焦点转移顺序(前提文本焦点从0至Max_Text_Index)
    For Int_TabIndex = 0 To Max_Text_Index
        For jsqte = 0 To Max_Text_Index
            If Textint(jsqte, 14) = Int_TabIndex Then
               LrText(jsqte).TabIndex = Int_TabIndex
            End If
        Next jsqte
    Next Int_TabIndex
  
End Sub

Private Function TextYxxpd(Index As Integer) As Boolean           '文本框有效性判断
  
    Dim Sqlstr As String
    Dim Findrec As ADODB.Recordset
  
    '文本框内容未曾改变不进行有效性判断
    If TextValiJudgeLock(Index) Then
        TextYxxpd = True
        Exit Function
    End If
  
    '文本框内容为空认为有效,并清空其Tag值
    If Trim(LrText(Index)) = "" Then
        LrText(Index).Tag = ""
        Call Wbklrwbcl(Index)
        TextValiJudgeLock(Index) = True
        TextYxxpd = True
        Exit Function
    End If
  
    '可在此加入不做有效性判断的理由
  
    Select Case Textint(Index, 4)
        Case 1      '编码型
            Sqlstr = Trim(Textstr(Index, 5))
            Sqlstr = Replace(Sqlstr, "@", "'" + Trim(LrText(Index).Text) + "'")
            Set Findrec = Cw_DataEnvi.DataConnect.Execute(Sqlstr)
            If Findrec.EOF Then
                Call Xtxxts(Trim(Textstr(Index, 6)), 0, 1)
                LrText(Index).SetFocus
                Exit Function
            Else
                Select Case Textint(Index, 3)
                    Case 0
                        If Len(Trim(Textstr(Index, 2))) <> 0 Then
                            LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                        End If
                        If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                            LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                        End If
                    Case 1
                        If Len(Trim(Textstr(Index, 3) & "")) <> 0 Then
                            LrText(Index).Text = Trim(Findrec.Fields(Trim(Textstr(Index, 3))))
                        End If
                        If Len(Trim(Textstr(Index, 2))) <> 0 Then
                            LrText(Index).Tag = Trim(Findrec.Fields(Trim(Textstr(Index, 2))))
                        End If
                End Select
            End If
        Case 2      '日期型
            If IsDate(LrText(Index).Text) Then
                LrText(Index).Text = Format(LrText(Index).Text, "yyyy-mm-dd")
                If Val(Mid(LrText(Index), 1, 4)) < 1900 Then
                    LrText(Index).Text = "1900" + Mid(LrText(Index), 5, 6)
                End If
            Else
                Tsxx = "非法公历日期!(格式:" + Format(Date, "yyyy-mm-dd") + ")"
                Call Xtxxts(Tsxx, 0, 1)
                LrText(Index).SetFocus
                Exit Function
            End If
        Case 3      '其他类型
    End Select
    
    '如果有效则加锁,用户不改变内容则不再进行有效性判断
    TextValiJudgeLock(Index) = True

    '调用文本框事后处理程序
    Call Wbklrwbcl(Index)
       
    '有效性判断通过则返回True
    TextYxxpd = True
   
End Function