📄 pap.c
字号:
/****************************************************************************** pap.c - Network Password Authentication Protocol program file.** Copyright (c) 2003 by Marc Boucher, Services Informatiques (MBSI) inc.* portions Copyright (c) 1997 by Global Election Systems Inc.** The authors hereby grant permission to use, copy, modify, distribute,* and license this software and its documentation for any purpose, provided* that existing copyright notices are retained in all copies and that this* notice and the following disclaimer are included verbatim in any * distributions. No written agreement, license, or royalty fee is required* for any of the authorized uses.** THIS SOFTWARE IS PROVIDED BY THE CONTRIBUTORS *AS IS* AND ANY EXPRESS OR* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. * IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.******************************************************************************** REVISION HISTORY** 03-01-01 Marc Boucher <marc@mbsi.ca>* Ported to lwIP.* 97-12-12 Guy Lancaster <lancasterg@acm.org>, Global Election Systems Inc.* Original.*****************************************************************************//* * upap.c - User/Password Authentication Protocol. * * Copyright (c) 1989 Carnegie Mellon University. * All rights reserved. * * Redistribution and use in source and binary forms are permitted * provided that the above copyright notice and this paragraph are * duplicated in all such forms and that any documentation, * advertising materials, and other materials related to such * distribution and use acknowledge that the software was developed * by Carnegie Mellon University. The name of the * University may not be used to endorse or promote products derived * from this software without specific prior written permission. * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE. */#include "ppp.h"#include "auth.h"#include "pap.h"#include "pppdebug.h"#if PAP_SUPPORT > 0/***********************************//*** LOCAL FUNCTION DECLARATIONS ***//***********************************//* * Protocol entry points. */static void upap_init (int);static void upap_lowerup (int);static void upap_lowerdown (int);static void upap_input (int, u_char *, int);static void upap_protrej (int);static void upap_timeout (void *);static void upap_reqtimeout (void *);static void upap_rauthreq (upap_state *, u_char *, int, int);static void upap_rauthack (upap_state *, u_char *, int, int);static void upap_rauthnak (upap_state *, u_char *, int, int);static void upap_sauthreq (upap_state *);static void upap_sresp (upap_state *, u_char, u_char, char *, int);/******************************//*** PUBLIC DATA STRUCTURES ***//******************************/struct protent pap_protent = { PPP_PAP, upap_init, upap_input, upap_protrej, upap_lowerup, upap_lowerdown, NULL, NULL,#if 0 upap_printpkt, NULL,#endif 1, "PAP",#if 0 NULL, NULL, NULL#endif};upap_state upap[NUM_PPP]; /* UPAP state; one for each unit *//***********************************//*** PUBLIC FUNCTION DEFINITIONS ***//***********************************//* * Set the default login name and password for the pap sessions */void upap_setloginpasswd(int unit, const char *luser, const char *lpassword){ upap_state *u = &upap[unit]; /* Save the username and password we're given */ u->us_user = luser; u->us_userlen = strlen(luser); u->us_passwd = lpassword; u->us_passwdlen = strlen(lpassword);}/* * upap_authwithpeer - Authenticate us with our peer (start client). * * Set new state and send authenticate's. */void upap_authwithpeer(int unit, char *user, char *password){ upap_state *u = &upap[unit]; UPAPDEBUG((LOG_INFO, "upap_authwithpeer: %d user=%s password=%s s=%d\n", unit, user, password, u->us_clientstate)); upap_setloginpasswd(unit, user, password); u->us_transmits = 0; /* Lower layer up yet? */ if (u->us_clientstate == UPAPCS_INITIAL || u->us_clientstate == UPAPCS_PENDING) { u->us_clientstate = UPAPCS_PENDING; return; } upap_sauthreq(u); /* Start protocol */}/* * upap_authpeer - Authenticate our peer (start server). * * Set new state. */void upap_authpeer(int unit){ upap_state *u = &upap[unit]; /* Lower layer up yet? */ if (u->us_serverstate == UPAPSS_INITIAL || u->us_serverstate == UPAPSS_PENDING) { u->us_serverstate = UPAPSS_PENDING; return; } u->us_serverstate = UPAPSS_LISTEN; if (u->us_reqtimeout > 0) TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout);}/**********************************//*** LOCAL FUNCTION DEFINITIONS ***//**********************************//* * upap_init - Initialize a UPAP unit. */static void upap_init(int unit){ upap_state *u = &upap[unit]; UPAPDEBUG((LOG_INFO, "upap_init: %d\n", unit)); u->us_unit = unit; u->us_user = NULL; u->us_userlen = 0; u->us_passwd = NULL; u->us_passwdlen = 0; u->us_clientstate = UPAPCS_INITIAL; u->us_serverstate = UPAPSS_INITIAL; u->us_id = 0; u->us_timeouttime = UPAP_DEFTIMEOUT; u->us_maxtransmits = 10; u->us_reqtimeout = UPAP_DEFREQTIME;}/* * upap_timeout - Retransmission timer for sending auth-reqs expired. */static void upap_timeout(void *arg){ upap_state *u = (upap_state *) arg; UPAPDEBUG((LOG_INFO, "upap_timeout: %d timeout %d expired s=%d\n", u->us_unit, u->us_timeouttime, u->us_clientstate)); if (u->us_clientstate != UPAPCS_AUTHREQ) return; if (u->us_transmits >= u->us_maxtransmits) { /* give up in disgust */ UPAPDEBUG((LOG_ERR, "No response to PAP authenticate-requests\n")); u->us_clientstate = UPAPCS_BADAUTH; auth_withpeer_fail(u->us_unit, PPP_PAP); return; } upap_sauthreq(u); /* Send Authenticate-Request */}/* * upap_reqtimeout - Give up waiting for the peer to send an auth-req. */static void upap_reqtimeout(void *arg){ upap_state *u = (upap_state *) arg; if (u->us_serverstate != UPAPSS_LISTEN) return; /* huh?? */ auth_peer_fail(u->us_unit, PPP_PAP); u->us_serverstate = UPAPSS_BADAUTH;}/* * upap_lowerup - The lower layer is up. * * Start authenticating if pending. */static void upap_lowerup(int unit){ upap_state *u = &upap[unit]; UPAPDEBUG((LOG_INFO, "upap_lowerup: %d s=%d\n", unit, u->us_clientstate)); if (u->us_clientstate == UPAPCS_INITIAL) u->us_clientstate = UPAPCS_CLOSED; else if (u->us_clientstate == UPAPCS_PENDING) { upap_sauthreq(u); /* send an auth-request */ } if (u->us_serverstate == UPAPSS_INITIAL) u->us_serverstate = UPAPSS_CLOSED; else if (u->us_serverstate == UPAPSS_PENDING) { u->us_serverstate = UPAPSS_LISTEN; if (u->us_reqtimeout > 0) TIMEOUT(upap_reqtimeout, u, u->us_reqtimeout); }}/* * upap_lowerdown - The lower layer is down. * * Cancel all timeouts. */static void upap_lowerdown(int unit){ upap_state *u = &upap[unit]; UPAPDEBUG((LOG_INFO, "upap_lowerdown: %d s=%d\n", unit, u->us_clientstate)); if (u->us_clientstate == UPAPCS_AUTHREQ) /* Timeout pending? */ UNTIMEOUT(upap_timeout, u); /* Cancel timeout */ if (u->us_serverstate == UPAPSS_LISTEN && u->us_reqtimeout > 0) UNTIMEOUT(upap_reqtimeout, u); u->us_clientstate = UPAPCS_INITIAL; u->us_serverstate = UPAPSS_INITIAL;}/* * upap_protrej - Peer doesn't speak this protocol. * * This shouldn't happen. In any case, pretend lower layer went down. */static void upap_protrej(int unit){ upap_state *u = &upap[unit]; if (u->us_clientstate == UPAPCS_AUTHREQ) { UPAPDEBUG((LOG_ERR, "PAP authentication failed due to protocol-reject\n")); auth_withpeer_fail(unit, PPP_PAP); } if (u->us_serverstate == UPAPSS_LISTEN) { UPAPDEBUG((LOG_ERR, "PAP authentication of peer failed (protocol-reject)\n")); auth_peer_fail(unit, PPP_PAP); } upap_lowerdown(unit);}/* * upap_input - Input UPAP packet. */static void upap_input(int unit, u_char *inpacket, int l){ upap_state *u = &upap[unit]; u_char *inp; u_char code, id; int len; /* * Parse header (code, id and length). * If packet too short, drop it. */ inp = inpacket; if (l < UPAP_HEADERLEN) { UPAPDEBUG((LOG_INFO, "pap_input: rcvd short header.\n")); return; } GETCHAR(code, inp); GETCHAR(id, inp); GETSHORT(len, inp); if (len < UPAP_HEADERLEN) { UPAPDEBUG((LOG_INFO, "pap_input: rcvd illegal length.\n")); return; } if (len > l) { UPAPDEBUG((LOG_INFO, "pap_input: rcvd short packet.\n")); return; } len -= UPAP_HEADERLEN; /* * Action depends on code. */ switch (code) { case UPAP_AUTHREQ: upap_rauthreq(u, inp, id, len); break; case UPAP_AUTHACK: upap_rauthack(u, inp, id, len); break; case UPAP_AUTHNAK: upap_rauthnak(u, inp, id, len); break; default: /* XXX Need code reject */ break; }}/* * upap_rauth - Receive Authenticate. */static void upap_rauthreq( upap_state *u, u_char *inp, int id, int len){ u_char ruserlen, rpasswdlen; char *ruser, *rpasswd; int retcode; char *msg; int msglen; UPAPDEBUG((LOG_INFO, "pap_rauth: Rcvd id %d.\n", id)); if (u->us_serverstate < UPAPSS_LISTEN) return; /* * If we receive a duplicate authenticate-request, we are * supposed to return the same status as for the first request. */ if (u->us_serverstate == UPAPSS_OPEN) { upap_sresp(u, UPAP_AUTHACK, id, "", 0); /* return auth-ack */ return; } if (u->us_serverstate == UPAPSS_BADAUTH) { upap_sresp(u, UPAP_AUTHNAK, id, "", 0); /* return auth-nak */ return; } /* * Parse user/passwd. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "pap_rauth: rcvd short packet.\n")); return; } GETCHAR(ruserlen, inp); len -= sizeof (u_char) + ruserlen + sizeof (u_char); if (len < 0) { UPAPDEBUG((LOG_INFO, "pap_rauth: rcvd short packet.\n")); return; } ruser = (char *) inp; INCPTR(ruserlen, inp); GETCHAR(rpasswdlen, inp); if (len < rpasswdlen) { UPAPDEBUG((LOG_INFO, "pap_rauth: rcvd short packet.\n")); return; } rpasswd = (char *) inp; /* * Check the username and password given. */ retcode = check_passwd(u->us_unit, ruser, ruserlen, rpasswd, rpasswdlen, &msg, &msglen); BZERO(rpasswd, rpasswdlen); upap_sresp(u, retcode, id, msg, msglen); if (retcode == UPAP_AUTHACK) { u->us_serverstate = UPAPSS_OPEN; auth_peer_success(u->us_unit, PPP_PAP, ruser, ruserlen); } else { u->us_serverstate = UPAPSS_BADAUTH; auth_peer_fail(u->us_unit, PPP_PAP); } if (u->us_reqtimeout > 0) UNTIMEOUT(upap_reqtimeout, u);}/* * upap_rauthack - Receive Authenticate-Ack. */static void upap_rauthack( upap_state *u, u_char *inp, int id, int len){ u_char msglen; char *msg; UPAPDEBUG((LOG_INFO, "pap_rauthack: Rcvd id %d s=%d\n", id, u->us_clientstate)); if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */ return; /* * Parse message. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "pap_rauthack: rcvd short packet.\n")); return; } GETCHAR(msglen, inp); len -= sizeof (u_char); if (len < msglen) { UPAPDEBUG((LOG_INFO, "pap_rauthack: rcvd short packet.\n")); return; } msg = (char *) inp; PRINTMSG(msg, msglen); u->us_clientstate = UPAPCS_OPEN; auth_withpeer_success(u->us_unit, PPP_PAP);}/* * upap_rauthnak - Receive Authenticate-Nakk. */static void upap_rauthnak( upap_state *u, u_char *inp, int id, int len){ u_char msglen; char *msg; UPAPDEBUG((LOG_INFO, "pap_rauthnak: Rcvd id %d s=%d\n", id, u->us_clientstate)); if (u->us_clientstate != UPAPCS_AUTHREQ) /* XXX */ return; /* * Parse message. */ if (len < sizeof (u_char)) { UPAPDEBUG((LOG_INFO, "pap_rauthnak: rcvd short packet.\n")); return; } GETCHAR(msglen, inp); len -= sizeof (u_char); if (len < msglen) { UPAPDEBUG((LOG_INFO, "pap_rauthnak: rcvd short packet.\n")); return; } msg = (char *) inp; PRINTMSG(msg, msglen); u->us_clientstate = UPAPCS_BADAUTH; UPAPDEBUG((LOG_ERR, "PAP authentication failed\n")); auth_withpeer_fail(u->us_unit, PPP_PAP);}/* * upap_sauthreq - Send an Authenticate-Request. */static void upap_sauthreq(upap_state *u){ u_char *outp; int outlen; outlen = UPAP_HEADERLEN + 2 * sizeof (u_char) + u->us_userlen + u->us_passwdlen; outp = outpacket_buf[u->us_unit]; MAKEHEADER(outp, PPP_PAP); PUTCHAR(UPAP_AUTHREQ, outp); PUTCHAR(++u->us_id, outp); PUTSHORT(outlen, outp); PUTCHAR(u->us_userlen, outp); BCOPY(u->us_user, outp, u->us_userlen); INCPTR(u->us_userlen, outp); PUTCHAR(u->us_passwdlen, outp); BCOPY(u->us_passwd, outp, u->us_passwdlen); pppWrite(u->us_unit, outpacket_buf[u->us_unit], outlen + PPP_HDRLEN); UPAPDEBUG((LOG_INFO, "pap_sauth: Sent id %d\n", u->us_id)); TIMEOUT(upap_timeout, u, u->us_timeouttime); ++u->us_transmits; u->us_clientstate = UPAPCS_AUTHREQ;}/* * upap_sresp - Send a response (ack or nak). */static void upap_sresp( upap_state *u, u_char code, u_char id, char *msg, int msglen){ u_char *outp; int outlen; outlen = UPAP_HEADERLEN + sizeof (u_char) + msglen; outp = outpacket_buf[u->us_unit]; MAKEHEADER(outp, PPP_PAP); PUTCHAR(code, outp); PUTCHAR(id, outp); PUTSHORT(outlen, outp); PUTCHAR(msglen, outp); BCOPY(msg, outp, msglen); pppWrite(u->us_unit, outpacket_buf[u->us_unit], outlen + PPP_HDRLEN); UPAPDEBUG((LOG_INFO, "pap_sresp: Sent code %d, id %d s=%d\n", code, id, u->us_clientstate));}#if 0/* * upap_printpkt - print the contents of a PAP packet. */static int upap_printpkt( u_char *p, int plen, void (*printer) (void *, char *, ...), void *arg){ (void)p; (void)plen; (void)printer; (void)arg; return 0;}#endif#endif /* PAP_SUPPORT */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -