flash.ini

基于LPC2200的发声程序,在lpc2200开发板上通过,对于想进行语音开发的朋友非常有参考价值

/******************************************************************************/
/* FLASH.INI: Flash Initialization File                                       */
/******************************************************************************/
// <<< Use Configuration Wizard in Context Menu >>>                           // 
/******************************************************************************/
/* This file is part of the uVision/ARM development tools.                    */
/* Copyright (c) 2005-2006 Keil Software. All rights reserved.                */
/* This software may only be used under the terms of a valid, current,        */
/* end user licence from KEIL for a compatible version of KEIL software       */
/* development tools. Nothing else gives you the right to use this software.  */
/******************************************************************************/


FUNC void Setup (void) {

// <h> External Memory Controller (EMC)

//   <h> Bank Configuration 0 (BCFG0)
//     <o1.0..3>   IDCY: Idle Cycles <0-15>
//     <o1.5..9>   WST1: Wait States 1 <0-31>
//     <o1.11..15> WST2: Wait States 2 <0-31>
//     <o1.10>     RBLE: Read Byte Lane Enable
//     <o1.26>     WP: Write Protect
//     <o1.27>     BM: Burst ROM
//     <o1.28..29> MW: Memory Width  <0=>  8-bit  <1=> 16-bit
//                                   <2=> 32-bit  <3=> Reserved
//   </h>
  _WDWORD(0xFFE00000, 0x20003CE3);   // BCFG0: Flash Bus Configuration

  _WDWORD(0xE002C014, 0x0E6001E4);   // PINSEL2: CS0, OE, WE, BLS0..3
                                     //          D0..31, A2..23, JTAG

// </h>

}

Setup();                             // Setup for Flash