makefile.in

Linux系统下著名的个人防火墙

.s.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

.S.lo:
	$(LIBTOOL) --mode=compile $(COMPILE) -c $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:

maintainer-clean-libtool:

firestarter$(EXEEXT): $(firestarter_OBJECTS) $(firestarter_DEPENDENCIES)
	@rm -f firestarter$(EXEEXT)
	$(LINK) $(firestarter_LDFLAGS) $(firestarter_OBJECTS) $(firestarter_LDADD) $(LIBS)

install-gladeDATA: $(glade_DATA)
	@$(NORMAL_INSTALL)
	$(mkinstalldirs) $(DESTDIR)$(gladedir)
	@list='$(glade_DATA)'; for p in $$list; do \
	  if test -f $(srcdir)/$$p; then \
	    echo " $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(gladedir)/$$p"; \
	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(gladedir)/$$p; \
	  else if test -f $$p; then \
	    echo " $(INSTALL_DATA) $$p $(DESTDIR)$(gladedir)/$$p"; \
	    $(INSTALL_DATA) $$p $(DESTDIR)$(gladedir)/$$p; \
	  fi; fi; \
	done

uninstall-gladeDATA:
	@$(NORMAL_UNINSTALL)
	list='$(glade_DATA)'; for p in $$list; do \
	  rm -f $(DESTDIR)$(gladedir)/$$p; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $$MAKEFLAGS; amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" != "." || dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags  $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)

subdir = src

distdir: $(DISTFILES)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
dhcp-server.o: dhcp-server.c dhcp-server.h ../config.h wizard.h \
	preferences.h util.h firestarter.h
eggtrayicon.o: eggtrayicon.c ../config.h eggtrayicon.h
firestarter.o: firestarter.c ../config.h globals.h firestarter.h gui.h \
	menus.h statusview.h util.h logread.h wizard.h preferences.h \
	scriptwriter.h policyview.h dhcp-server.h
gui.o: gui.c ../config.h globals.h firestarter.h gui.h statusview.h \
	hitview.h util.h menus.h xpm/firestarter-pixbufs.h tray.h \
	preferences.h policyview.h
hitview.o: hitview.c ../config.h firestarter.h globals.h hitview.h \
	util.h menus.h gui.h statusview.h preferences.h logread.h \
	scriptwriter.h wizard.h policyview.h
logread.o: logread.c ../config.h globals.h logread.h firestarter.h \
	util.h hitview.h statusview.h service.h
menus.o: menus.c menus.h ../config.h gui.h firestarter.h statusview.h \
	wizard.h savelog.h preferences.h hitview.h util.h globals.h \
	policyview.h xpm/firestarter-pixbufs.h
netfilter-script.o: netfilter-script.c wizard.h ../config.h \
	netfilter-script.h util.h firestarter.h preferences.h \
	policyview.h scriptwriter.h
policyview.o: policyview.c ../config.h policyview.h firestarter.h gui.h \
	globals.h preferences.h menus.h statusview.h util.h \
	scriptwriter.h wizard.h service.h
preferences.o: preferences.c globals.h ../config.h firestarter.h \
	preferences.h wizard.h wizard-choices.h scriptwriter.h \
	policyview.h statusview.h util.h gui.h service.h tray.h \
	dhcp-server.h
savelog.o: savelog.c savelog.h ../config.h firestarter.h globals.h \
	hitview.h util.h
scriptwriter.o: scriptwriter.c ../config.h firestarter.h globals.h \
	wizard.h util.h scriptwriter.h policyview.h netfilter-script.h \
	preferences.h gui.h dhcp-server.h
service.o: service.c service.h ../config.h
statusview.o: statusview.c ../config.h firestarter.h globals.h \
	statusview.h menus.h gui.h preferences.h util.h service.h \
	tray.h xpm/firestarter-pixbufs.h
tray.o: tray.c tray.h ../config.h statusview.h firestarter.h \
	eggtrayicon.h globals.h xpm/firestarter-pixbufs.h gui.h util.h \
	hitview.h preferences.h
util.o: util.c globals.h ../config.h firestarter.h util.h hitview.h \
	preferences.h
wizard-choices.o: wizard-choices.c wizard-choices.h ../config.h wizard.h \
	util.h firestarter.h preferences.h
wizard.o: wizard.c globals.h ../config.h firestarter.h wizard.h \
	wizard-choices.h scriptwriter.h policyview.h util.h \
	xpm/firestarter-pixbufs.h preferences.h dhcp-server.h gui.h \
	statusview.h

info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
install-exec-am: install-binPROGRAMS
install-exec: install-exec-recursive

install-data-am: install-gladeDATA
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am: uninstall-binPROGRAMS uninstall-gladeDATA
uninstall: uninstall-recursive
all-am: Makefile $(PROGRAMS) $(DATA)
all-redirect: all-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:
	$(mkinstalldirs)  $(DESTDIR)$(bindir) $(DESTDIR)$(gladedir)


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-binPROGRAMS mostlyclean-compile \
		mostlyclean-libtool mostlyclean-tags \
		mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-binPROGRAMS clean-compile clean-libtool clean-tags \
		clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-binPROGRAMS distclean-compile distclean-libtool \
		distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive

maintainer-clean-am:  maintainer-clean-binPROGRAMS \
		maintainer-clean-compile maintainer-clean-libtool \
		maintainer-clean-tags maintainer-clean-generic \
		distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive

.PHONY: mostlyclean-binPROGRAMS distclean-binPROGRAMS clean-binPROGRAMS \
maintainer-clean-binPROGRAMS uninstall-binPROGRAMS install-binPROGRAMS \
mostlyclean-compile distclean-compile clean-compile \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool uninstall-gladeDATA \
install-gladeDATA install-data-recursive uninstall-data-recursive \
install-exec-recursive uninstall-exec-recursive installdirs-recursive \
uninstalldirs-recursive all-recursive check-recursive \
installcheck-recursive info-recursive dvi-recursive \
mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck install-exec-am \
install-exec install-data-am install-data install-am install \
uninstall-am uninstall all-redirect all-am all installdirs-am \
installdirs mostlyclean-generic distclean-generic clean-generic \
maintainer-clean-generic clean mostlyclean distclean maintainer-clean


# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: