sinewave.qsf

sinewave程序是一个正弦波发生器程序。256点查表法

# Copyright (C) 1991-2005 Altera Corporation
# Your use of Altera Corporation's design tools, logic functions 
# and other software and tools, and its AMPP partner logic       
# functions, and any output files any of the foregoing           
# (including device programming or simulation files), and any    
# associated documentation or information are expressly subject  
# to the terms and conditions of the Altera Program License      
# Subscription Agreement, Altera MegaCore Function License       
# Agreement, or other applicable license agreement, including,   
# without limitation, that your use is for the sole purpose of   
# programming logic devices manufactured by Altera and sold by   
# Altera or its authorized distributors.  Please refer to the    
# applicable agreement for further details.


# The default values for assignments are stored in the file
#		sinewave_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
#		assignment_defaults.qdf

# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.


# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 5.0
set_global_assignment -name PROJECT_CREATION_TIME_DATE "11:05:13  AUGUST 08, 2007"
set_global_assignment -name LAST_QUARTUS_VERSION 5.0
set_global_assignment -name VHDL_FILE "E:\\WUWEI\\sinewave\\sinewave.vhd"
set_global_assignment -name SIGNALTAP_FILE stp1.stp

# Pin & Location Assignments
# ==========================
set_location_assignment PIN_L3 -to CS
set_location_assignment PIN_G5 -to DSP_RESET
set_location_assignment PIN_G1 -to clk
set_location_assignment PIN_B16 -to data[7]
set_location_assignment PIN_B15 -to data[6]
set_location_assignment PIN_A15 -to data[5]
set_location_assignment PIN_B14 -to data[4]
set_location_assignment PIN_B13 -to data[3]
set_location_assignment PIN_A13 -to data[2]
set_location_assignment PIN_B12 -to data[1]
set_location_assignment PIN_B11 -to data[0]
set_location_assignment PIN_D11 -to wr
set_location_assignment PIN_K2 -to busopen
set_location_assignment PIN_K1 -to Dir

# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name FAMILY Cyclone
set_global_assignment -name TOP_LEVEL_ENTITY sinewave

# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EP1C12F256I7
set_global_assignment -name ERROR_CHECK_FREQUENCY_DIVISOR 1

# SignalTap II Assignments
# ========================
set_global_assignment -name ENABLE_SIGNALTAP On
set_global_assignment -name USE_SIGNALTAP_FILE stp1.stp

# ---------------------------------------------------
# start AUTO_INSERT_SLD_NODE_ENTITY(auto_signaltap_0)

	# SignalTap II Assignments
	# ========================
	set_global_assignment -name SLD_NODE_CREATOR_ID 110 -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_ENTITY_NAME sld_signaltap -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_clk -to clk -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[0] -to data[0] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[1] -to data[1] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[2] -to data[2] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[3] -to data[3] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[4] -to data[4] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[5] -to data[5] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[6] -to data[6] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_trigger_in[7] -to data[7] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[0] -to data[0] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[1] -to data[1] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[2] -to data[2] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[3] -to data[3] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[4] -to data[4] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[5] -to data[5] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[6] -to data[6] -section_id auto_signaltap_0
	set_instance_assignment -name CONNECT_TO_SLD_NODE_ENTITY_PORT acq_data_in[7] -to data[7] -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_DATA_BITS=8" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_BITS=8" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_INFO=402681344" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_CRC_LOWORD=56561" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_NODE_CRC_HIWORD=19349" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_DATA_BIT_CNTR_BITS=3" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL=1" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_SAMPLE_DEPTH=128" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_MEM_ADDRESS_BITS=7" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_IN_ENABLED=0" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ADVANCED_TRIGGER_ENTITY=basic,1," -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_TRIGGER_LEVEL_PIPELINE=1" -section_id auto_signaltap_0
	set_global_assignment -name SLD_NODE_PARAMETER_ASSIGNMENT "SLD_ENABLE_ADVANCED_TRIGGER=0" -section_id auto_signaltap_0

# end AUTO_INSERT_SLD_NODE_ENTITY(auto_signaltap_0)
# -------------------------------------------------