📄 at91sam7se512_lqfp128.bsd
字号:
------------------------------------------------------------------------
-- A T M E L A R M M I C R O C O N T R O L L E R S --
------------------------------------------------------------------------
-- BSDL file
--
-- File Name: AT91SAM7SE512_LQFP128.BSD
-- File Revision: 1.0
-- Date: Fri July 20 2007
-- Created by: Atmel Corporation
-- File Status: Released
--
-- Device: AT91SAM7SE512
-- Package: LQFP128
--
-- Visit http://www.atmel.com for a updated list of BSDL files.
--
------------------------------------------------------------------------
-- Syntax and Semantics are checked against the IEEE 1149.1 standard. --
-- The logical functioning of the standard Boundary-Scan instructions --
-- and of the associated bypass, idcode and boundary-scan register --
-- described in this BSDL file has been verified against its related --
-- silicon by JTAG Technologies B.V. --
------------------------------------------------------------------------
------------------------------------------------------------------------
-- IMPORTANT NOTICE --
-- --
-- Copyright 2006 Atmel Corporation. All Rights Reserved. --
-- --
-- Atmel assumes no responsibility or liability arising out --
-- this application or use of any information described herein --
-- except as expressly agreed to in writing by Atmel Corporation. --
-- --
-- ------------------------------------------------------------------ --
-- This BSDL File has been verified on severals BSDL Syntax --
-- Checker/Compilers --
-- --
-- BSDL compilation of 735 lines completed without errors. --
-- --
--------------------------------------------------------------------------
entity AT91SAM7SE512 is
-- This section identifies the default device package selected.
generic (PHYSICAL_PIN_MAP: string:= "LQFP128");
-- This section declares all the ports in the design.
port (
advref : linkage bit;
ad7 : linkage bit;
ad6 : linkage bit;
ad5 : linkage bit;
ad4 : linkage bit;
vddout : linkage bit;
vddin : linkage bit;
pa20 : inout bit;
pa19 : inout bit;
pa18 : inout bit;
pa17 : inout bit;
pa16 : inout bit;
pa15 : inout bit;
pa14 : inout bit;
pa13 : inout bit;
pa12 : inout bit;
pa11 : inout bit;
pa10 : inout bit;
pa9 : inout bit;
pa8 : inout bit;
pa7 : inout bit;
pa6 : inout bit;
pa5 : inout bit;
pa4 : inout bit;
pa3 : inout bit;
pa2 : inout bit;
pa1 : inout bit;
pa0 : inout bit;
pb31 : inout bit;
pb30 : inout bit;
pb29 : inout bit;
pb28 : inout bit;
pb27 : inout bit;
pb26 : inout bit;
pb25 : inout bit;
pb24 : inout bit;
pb23 : inout bit;
pb22 : inout bit;
pb21 : inout bit;
pb20 : inout bit;
pb19 : inout bit;
pb18 : inout bit;
pb17 : inout bit;
pb16 : inout bit;
pb15 : inout bit;
pb14 : inout bit;
pb13 : inout bit;
pb12 : inout bit;
pb11 : inout bit;
pb10 : inout bit;
pb9 : inout bit;
pb8 : inout bit;
pb7 : inout bit;
pb6 : inout bit;
pb5 : inout bit;
pb4 : inout bit;
pb3 : inout bit;
icetdi : in bit;
icetdo : out bit;
pb2 : inout bit;
pb1 : inout bit;
pb0 : inout bit;
nrst : in bit;
test : in bit;
erase : in bit;
icetck : in bit;
icetms : in bit;
jtagsel : in bit;
pc23 : inout bit;
pc22 : inout bit;
pc21 : inout bit;
pc20 : inout bit;
pc19 : inout bit;
pc18 : inout bit;
pc17 : inout bit;
pc16 : inout bit;
pc15 : inout bit;
pc14 : inout bit;
pc13 : inout bit;
pc12 : inout bit;
pc11 : inout bit;
pc10 : inout bit;
pc9 : inout bit;
sdck : buffer bit;
pc8 : inout bit;
pc7 : inout bit;
pc6 : inout bit;
pc5 : inout bit;
pc4 : inout bit;
pc3 : inout bit;
pc2 : inout bit;
pc1 : inout bit;
pc0 : inout bit;
pa31 : inout bit;
pa30 : inout bit;
pa29 : inout bit;
pa28 : inout bit;
pa27 : inout bit;
pa26 : inout bit;
pa25 : inout bit;
pa24 : inout bit;
pa23 : inout bit;
pa22 : inout bit;
pa21 : inout bit;
dm : linkage bit;
dp : linkage bit;
osc9m_xin : linkage bit;
osc9m_xout : linkage bit;
pll_rc : linkage bit;
gnd : linkage bit_vector (1 to 7);
vddio : linkage bit_vector (1 to 5);
vddcore : linkage bit_vector (1 to 5);
vddflash : linkage bit;
vddpll : linkage bit
);
use STD_1149_1_1994.all;
attribute COMPONENT_CONFORMANCE of AT91SAM7SE512: entity is "STD_1149_1_1993";
attribute PIN_MAP of AT91SAM7SE512: entity is PHYSICAL_PIN_MAP;
-- This section specifies the pin map for each port. This information
-- is extracted from the port-to-pin map file that was read in using
-- the "read_pin_map" command.
constant LQFP128: PIN_MAP_STRING :=
"advref : 1," &
"ad7 : 3," &
"ad6 : 4," &
"ad5 : 5," &
"ad4 : 6," &
"vddout : 7," &
"vddin : 8," &
"pa20 : 9," &
"pa19 : 10," &
"pa18 : 11," &
"pa17 : 12," &
"pa16 : 13," &
"pa15 : 14," &
"pa14 : 15," &
"pa13 : 16," &
"pa12 : 17," &
"pa11 : 18," &
"pa10 : 19," &
"pa9 : 20," &
"pa8 : 24," &
"pa7 : 25," &
"pa6 : 26," &
"pa5 : 27," &
"pa4 : 28," &
"pa3 : 29," &
"pa2 : 30," &
"pa1 : 31," &
"pa0 : 32," &
"pb31 : 33," &
"pb30 : 34," &
"pb29 : 35," &
"pb28 : 36," &
"pb27 : 37," &
"pb26 : 38," &
"pb25 : 39," &
"pb24 : 40," &
"pb23 : 41," &
"pb22 : 42," &
"pb21 : 43," &
"pb20 : 44," &
"pb19 : 48," &
"pb18 : 49," &
"pb17 : 50," &
"pb16 : 51," &
"pb15 : 52," &
"pb14 : 53," &
"pb13 : 54," &
"pb12 : 55," &
"pb11 : 56," &
"pb10 : 57," &
"pb9 : 58," &
"pb8 : 59," &
"pb7 : 60," &
"pb6 : 61," &
"pb5 : 62," &
"pb4 : 63," &
"pb3 : 64," &
"icetdi : 65," &
"icetdo : 66," &
"pb2 : 67," &
"pb1 : 68," &
"pb0 : 69," &
"nrst : 73," &
"test : 74," &
"erase : 75," &
"icetck : 76," &
"icetms : 77," &
"jtagsel : 78," &
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -