📄 cedbview.mak

📁 EVC4 编程CEDB数据库操作
💻 MAK
📖 第 1 页 / 共 3 页
字号:
12 3 下一页
# Microsoft Developer Studio Generated NMAKE File, Based on dbview.dsp
!IF "$(CFG)" == ""
CFG=dbview - Win32 (WCE MIPS) Debug
!MESSAGE No configuration specified. Defaulting to dbview - Win32 (WCE MIPS) Debug.
!ENDIF 

!IF "$(CESubsystem)" == ""
CESubsystem=windowsce,2.0
!MESSAGE Variable CESubsystem not specified. Defaulting to windowsce,2.0
!ENDIF 

!IF "$(CEVersion)" == ""
CEVersion=200
!MESSAGE Variable CEVersion not specified. Defaulting to 200
!ENDIF 

!IF "$(CEConfigName)" == ""
CEConfigName=H/PC Ver. 2.00
!MESSAGE Variable CEConfigName not specified.  Defaulting to H/PC Ver. 2.00
!ENDIF 

!IF $(CEVersion) < 201
CECrt=L
CECrtDebug=Ld
CECrtMT=T
CECrtMTDebug=Td
CENoDefaultLib=corelibc.lib
CEx86Corelibc= 
!ELSE 
CECrt=C
CECrtDebug=C
CECrtMT=C
CECrtMTDebug=C
CENoDefaultLib=libc.lib /nodefaultlib:libcd.lib /nodefaultlib:libcmt.lib /nodefaultlib:libcmtd.lib /nodefaultlib:msvcrt.lib /nodefaultlib:msvcrtd.lib
CEx86Corelibc=corelibc.lib
!ENDIF 

!IF "$(CFG)" != "dbview - Win32 (WCE MIPS) Release" && "$(CFG)" != "dbview - Win32 (WCE MIPS) Debug" && "$(CFG)" != "dbview - Win32 (WCE SH3) Release" && "$(CFG)" != "dbview - Win32 (WCE SH3) Debug" && "$(CFG)" != "dbview - Win32 (WCE x86) Release" && "$(CFG)" != "dbview - Win32 (WCE x86) Debug" && "$(CFG)" != "dbview - Win32 (WCE x86em) Release" && "$(CFG)" != "dbview - Win32 (WCE x86em) Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running NMAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE 
!MESSAGE NMAKE /f "dbview.mak" CFG="dbview - Win32 (WCE MIPS) Debug"
!MESSAGE 
!MESSAGE Possible choices for configuration are:
!MESSAGE 
!MESSAGE "dbview - Win32 (WCE MIPS) Release" (based on "Win32 (WCE MIPS) Application")
!MESSAGE "dbview - Win32 (WCE MIPS) Debug" (based on "Win32 (WCE MIPS) Application")
!MESSAGE "dbview - Win32 (WCE SH3) Release" (based on "Win32 (WCE SH3) Application")
!MESSAGE "dbview - Win32 (WCE SH3) Debug" (based on "Win32 (WCE SH3) Application")
!MESSAGE "dbview - Win32 (WCE x86) Release" (based on "Win32 (WCE x86) Application")
!MESSAGE "dbview - Win32 (WCE x86) Debug" (based on "Win32 (WCE x86) Application")
!MESSAGE "dbview - Win32 (WCE x86em) Release" (based on "Win32 (WCE x86em) Application")
!MESSAGE "dbview - Win32 (WCE x86em) Debug" (based on "Win32 (WCE x86em) Application")
!MESSAGE 
!ERROR An invalid configuration is specified.
!ENDIF 

!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE 
NULL=nul
!ENDIF 

!IF  "$(CFG)" == "dbview - Win32 (WCE MIPS) Release"

OUTDIR=.\WCEMIPSRel
INTDIR=.\WCEMIPSRel
# Begin Custom Macros
OutDir=.\WCEMIPSRel
# End Custom Macros

ALL : "$(OUTDIR)\dbview.exe"


CLEAN :
	-@erase "$(INTDIR)\dbfunc.obj"
	-@erase "$(INTDIR)\dbview.res"
	-@erase "$(INTDIR)\enumdb.obj"
	-@erase "$(INTDIR)\index.obj"
	-@erase "$(INTDIR)\initproc.obj"
	-@erase "$(INTDIR)\main.obj"
	-@erase "$(INTDIR)\memory.obj"
	-@erase "$(INTDIR)\seek.obj"
	-@erase "$(INTDIR)\treeview.obj"
	-@erase "$(INTDIR)\wndproc.obj"
	-@erase "$(OUTDIR)\dbview.exe"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

CPP=clmips.exe
CPP_PROJ=/nologo /M$(CECrt) /W3 /O2 /D _WIN32_WCE=$(CEVersion) /D "$(CEConfigName)" /D "NDEBUG" /D "MIPS" /D "_MIPS_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_MBCS" /Fp"$(INTDIR)\dbview.pch" /YX /Fo"$(INTDIR)\\" /c 

.c{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.c{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

RSC=rc.exe
RSC_PROJ=/l 0x409 /r /fo"$(INTDIR)\dbview.res" /d "MIPS" /d "_MIPS_" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "$(CEConfigName)" /d "UNICODE" /d "NDEBUG" 
MTL=midl.exe
MTL_PROJ=/nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32 
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\dbview.bsc" 
BSC32_SBRS= \
	
LINK32=link.exe
LINK32_FLAGS=commctrl.lib coredll.lib aygshell.lib /nologo /entry:"WinMainCRTStartup" /base:"0x00010000" /incremental:no /pdb:"$(OUTDIR)\dbview.pdb" /machine:MIPS /nodefaultlib:"$(CENoDefaultLib)" /out:"$(OUTDIR)\dbview.exe" /subsystem:$(CESubsystem) /STACK:65536,4096 
LINK32_OBJS= \
	"$(INTDIR)\dbfunc.obj" \
	"$(INTDIR)\enumdb.obj" \
	"$(INTDIR)\index.obj" \
	"$(INTDIR)\initproc.obj" \
	"$(INTDIR)\main.obj" \
	"$(INTDIR)\memory.obj" \
	"$(INTDIR)\seek.obj" \
	"$(INTDIR)\treeview.obj" \
	"$(INTDIR)\wndproc.obj" \
	"$(INTDIR)\dbview.res"

"$(OUTDIR)\dbview.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ELSEIF  "$(CFG)" == "dbview - Win32 (WCE MIPS) Debug"

OUTDIR=.\WCEMIPSDbg
INTDIR=.\WCEMIPSDbg
# Begin Custom Macros
OutDir=.\WCEMIPSDbg
# End Custom Macros

ALL : "$(OUTDIR)\dbview.exe"


CLEAN :
	-@erase "$(INTDIR)\dbfunc.obj"
	-@erase "$(INTDIR)\dbview.res"
	-@erase "$(INTDIR)\enumdb.obj"
	-@erase "$(INTDIR)\index.obj"
	-@erase "$(INTDIR)\initproc.obj"
	-@erase "$(INTDIR)\main.obj"
	-@erase "$(INTDIR)\memory.obj"
	-@erase "$(INTDIR)\seek.obj"
	-@erase "$(INTDIR)\treeview.obj"
	-@erase "$(INTDIR)\vc60.pdb"
	-@erase "$(INTDIR)\wndproc.obj"
	-@erase "$(OUTDIR)\dbview.exe"
	-@erase "$(OUTDIR)\dbview.ilk"
	-@erase "$(OUTDIR)\dbview.pdb"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

CPP=clmips.exe
CPP_PROJ=/nologo /M$(CECrtDebug) /W3 /Zi /Od /D _WIN32_WCE=$(CEVersion) /D "$(CEConfigName)" /D "DEBUG" /D "MIPS" /D "_MIPS_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_MBCS" /Fp"$(INTDIR)\dbview.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /c 

.c{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.c{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

RSC=rc.exe
RSC_PROJ=/l 0x409 /r /fo"$(INTDIR)\dbview.res" /d "MIPS" /d "_MIPS_" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "$(CEConfigName)" /d "UNICODE" /d "DEBUG" 
MTL=midl.exe
MTL_PROJ=/nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32 
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\dbview.bsc" 
BSC32_SBRS= \
	
LINK32=link.exe
LINK32_FLAGS=commctrl.lib coredll.lib aygshell.lib /nologo /entry:"WinMainCRTStartup" /base:"0x00010000" /incremental:yes /pdb:"$(OUTDIR)\dbview.pdb" /debug /machine:MIPS /nodefaultlib:"$(CENoDefaultLib)" /out:"$(OUTDIR)\dbview.exe" /subsystem:$(CESubsystem) /STACK:65536,4096 
LINK32_OBJS= \
	"$(INTDIR)\dbfunc.obj" \
	"$(INTDIR)\enumdb.obj" \
	"$(INTDIR)\index.obj" \
	"$(INTDIR)\initproc.obj" \
	"$(INTDIR)\main.obj" \
	"$(INTDIR)\memory.obj" \
	"$(INTDIR)\seek.obj" \
	"$(INTDIR)\treeview.obj" \
	"$(INTDIR)\wndproc.obj" \
	"$(INTDIR)\dbview.res"

"$(OUTDIR)\dbview.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ELSEIF  "$(CFG)" == "dbview - Win32 (WCE SH3) Release"

OUTDIR=.\WCESH3Rel
INTDIR=.\WCESH3Rel
# Begin Custom Macros
OutDir=.\WCESH3Rel
# End Custom Macros

ALL : "$(OUTDIR)\dbview.exe"


CLEAN :
	-@erase "$(INTDIR)\dbfunc.obj"
	-@erase "$(INTDIR)\dbview.res"
	-@erase "$(INTDIR)\enumdb.obj"
	-@erase "$(INTDIR)\index.obj"
	-@erase "$(INTDIR)\initproc.obj"
	-@erase "$(INTDIR)\main.obj"
	-@erase "$(INTDIR)\memory.obj"
	-@erase "$(INTDIR)\seek.obj"
	-@erase "$(INTDIR)\treeview.obj"
	-@erase "$(INTDIR)\wndproc.obj"
	-@erase "$(OUTDIR)\dbview.exe"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

CPP=shcl.exe
CPP_PROJ=/nologo /M$(CECrt) /W3 /O2 /D _WIN32_WCE=$(CEVersion) /D "$(CEConfigName)" /D "NDEBUG" /D "SHx" /D "SH3" /D "_SH3_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_MBCS" /Fp"$(INTDIR)\dbview.pch" /YX /Fo"$(INTDIR)\\" /c 

.c{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.c{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

RSC=rc.exe
RSC_PROJ=/l 0x409 /r /fo"$(INTDIR)\dbview.res" /d "SHx" /d "SH3" /d "_SH3_" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "$(CEConfigName)" /d "UNICODE" /d "NDEBUG" 
MTL=midl.exe
MTL_PROJ=/nologo /D "NDEBUG" /mktyplib203 /o "NUL" /win32 
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\dbview.bsc" 
BSC32_SBRS= \
	
LINK32=link.exe
LINK32_FLAGS=commctrl.lib coredll.lib aygshell.lib /nologo /entry:"WinMainCRTStartup" /base:"0x00010000" /incremental:no /pdb:"$(OUTDIR)\dbview.pdb" /machine:SH3 /nodefaultlib:"$(CENoDefaultLib)" /out:"$(OUTDIR)\dbview.exe" /subsystem:$(CESubsystem) /STACK:65536,4096 
LINK32_OBJS= \
	"$(INTDIR)\dbfunc.obj" \
	"$(INTDIR)\enumdb.obj" \
	"$(INTDIR)\index.obj" \
	"$(INTDIR)\initproc.obj" \
	"$(INTDIR)\main.obj" \
	"$(INTDIR)\memory.obj" \
	"$(INTDIR)\seek.obj" \
	"$(INTDIR)\treeview.obj" \
	"$(INTDIR)\wndproc.obj" \
	"$(INTDIR)\dbview.res"

"$(OUTDIR)\dbview.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ELSEIF  "$(CFG)" == "dbview - Win32 (WCE SH3) Debug"

OUTDIR=.\WCESH3Dbg
INTDIR=.\WCESH3Dbg
# Begin Custom Macros
OutDir=.\WCESH3Dbg
# End Custom Macros

ALL : "$(OUTDIR)\dbview.exe"


CLEAN :
	-@erase "$(INTDIR)\dbfunc.obj"
	-@erase "$(INTDIR)\dbview.res"
	-@erase "$(INTDIR)\enumdb.obj"
	-@erase "$(INTDIR)\index.obj"
	-@erase "$(INTDIR)\initproc.obj"
	-@erase "$(INTDIR)\main.obj"
	-@erase "$(INTDIR)\memory.obj"
	-@erase "$(INTDIR)\seek.obj"
	-@erase "$(INTDIR)\treeview.obj"
	-@erase "$(INTDIR)\vc60.pdb"
	-@erase "$(INTDIR)\wndproc.obj"
	-@erase "$(OUTDIR)\dbview.exe"
	-@erase "$(OUTDIR)\dbview.ilk"
	-@erase "$(OUTDIR)\dbview.pdb"

"$(OUTDIR)" :
    if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"

CPP=shcl.exe
CPP_PROJ=/nologo /M$(CECrtDebug) /W3 /Zi /Od /D _WIN32_WCE=$(CEVersion) /D "$(CEConfigName)" /D "DEBUG" /D "SHx" /D "SH3" /D "_SH3_" /D UNDER_CE=$(CEVersion) /D "UNICODE" /D "_MBCS" /Fp"$(INTDIR)\dbview.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /c 

.c{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.obj::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.c{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cpp{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

.cxx{$(INTDIR)}.sbr::
   $(CPP) @<<
   $(CPP_PROJ) $< 
<<

RSC=rc.exe
RSC_PROJ=/l 0x409 /r /fo"$(INTDIR)\dbview.res" /d "SHx" /d "SH3" /d "_SH3_" /d UNDER_CE=$(CEVersion) /d _WIN32_WCE=$(CEVersion) /d "$(CEConfigName)" /d "UNICODE" /d "DEBUG" 
MTL=midl.exe
MTL_PROJ=/nologo /D "_DEBUG" /mktyplib203 /o "NUL" /win32 
BSC32=bscmake.exe
BSC32_FLAGS=/nologo /o"$(OUTDIR)\dbview.bsc" 
BSC32_SBRS= \
	
LINK32=link.exe
LINK32_FLAGS=commctrl.lib coredll.lib aygshell.lib /nologo /entry:"WinMainCRTStartup" /base:"0x00010000" /incremental:yes /pdb:"$(OUTDIR)\dbview.pdb" /debug /machine:SH3 /nodefaultlib:"$(CENoDefaultLib)" /out:"$(OUTDIR)\dbview.exe" /subsystem:$(CESubsystem) /STACK:65536,4096 
LINK32_OBJS= \
	"$(INTDIR)\dbfunc.obj" \
	"$(INTDIR)\enumdb.obj" \
	"$(INTDIR)\index.obj" \
	"$(INTDIR)\initproc.obj" \
	"$(INTDIR)\main.obj" \
	"$(INTDIR)\memory.obj" \
	"$(INTDIR)\seek.obj" \
	"$(INTDIR)\treeview.obj" \
	"$(INTDIR)\wndproc.obj" \
	"$(INTDIR)\dbview.res"

"$(OUTDIR)\dbview.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS)
    $(LINK32) @<<
  $(LINK32_FLAGS) $(LINK32_OBJS)
<<

!ELSEIF  "$(CFG)" == "dbview - Win32 (WCE x86) Release"

OUTDIR=.\WCEX86Rel
INTDIR=.\WCEX86Rel
# Begin Custom Macros
OutDir=.\WCEX86Rel
# End Custom Macros

ALL : "$(OUTDIR)\dbview.exe"


CLEAN :
	-@erase "$(INTDIR)\dbfunc.obj"
	-@erase "$(INTDIR)\dbview.res"
	-@erase "$(INTDIR)\enumdb.obj"
	-@erase "$(INTDIR)\index.obj"
	-@erase "$(INTDIR)\initproc.obj"
	-@erase "$(INTDIR)\main.obj"
	-@erase "$(INTDIR)\memory.obj"
	-@erase "$(INTDIR)\seek.obj"
	-@erase "$(INTDIR)\treeview.obj"
	-@erase "$(INTDIR)\wndproc.obj"
12 3 下一页
💿 文件大小 176 K
👤 上传用户 quzhengjie
📂 所属分类其他数据库
🏷️ 相关标签

#EVC4 #CEDB #编程 #数据库操作
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -