powerpc.h

一个检测内存泄漏情况的工具

/* 
 * Copyright (c) 1991-1994 by Xerox Corporation.  All rights reserved.
 * Copyright (c) 1996-1999 by Silicon Graphics.  All rights reserved.
 * Copyright (c) 1999-2004 Hewlett-Packard Development Company, L.P.
 *
 *
 * THIS MATERIAL IS PROVIDED AS IS, WITH ABSOLUTELY NO WARRANTY EXPRESSED
 * OR IMPLIED.  ANY USE IS AT YOUR OWN RISK.
 *
 * Permission is hereby granted to use or copy this program
 * for any purpose,  provided the above notices are retained on all copies.
 * Permission to modify the code and to distribute modified code is granted,
 * provided the above notices are retained, and a notice that the code was
 * modified is included with the above copyright notice.
 *
 */

/* FIXME.  Incomplete.  No support for 64 bits.				*/
/* Memory model documented at http://www-106.ibm.com/developerworks/	*/
/* eserver/articles/archguide.html and (clearer)			*/
/* http://www-106.ibm.com/developerworks/eserver/articles/powerpc.html. */
/* There appears to be no implicit ordering between any kind of		*/
/* independent memory references.					*/
/* Architecture enforces some ordering based on control dependence.	*/
/* I don't know if that could help. 					*/
/* Data-dependent loads are always ordered.				*/
/* Based on the above references, eieio is intended for use on		*/
/* uncached memory, which we don't support.  It does not order loads	*/
/* from cached memory.							*/
/* Thanks to Maged Michael, Doug Lea, and Roger Hoover for helping to 	*/
/* track some of this down and correcting my misunderstandings. -HB	*/

#include "../all_aligned_atomic_load_store.h"

#include "../test_and_set_t_is_ao_t.h"
	/* There seems to be no byte equivalent of lwarx, so this	*/
	/* may really be what we want, at least in the 32-bit case.	*/

AO_INLINE void
AO_nop_full()
{
  __asm__ __volatile__("sync" : : : "memory");
}

#define AO_HAVE_nop_full

/* lwsync apparently works for everything but a StoreLoad barrier.	*/
AO_INLINE void
AO_lwsync()
{
  __asm__ __volatile__("lwsync" : : : "memory");
}

#define AO_nop_write() AO_lwsync()
#define AO_HAVE_nop_write

#define AO_nop_read() AO_lwsync()
#define AO_HAVE_nop_read

/* We explicitly specify load_acquire, since it is important, and can 	*/
/* be implemented relatively cheaply.  It could be implemented		*/
/* with an ordinary load followed by a lwsync.  But the general wisdom	*/
/* seems to be that a data dependent branch followed by an isync is 	*/
/* cheaper.  And the documentation is fairly explicit that this also 	*/
/* has acquire semantics.						*/
/* ppc64 uses ld not lwz */
#if defined(__powerpc64__) || defined(__ppc64__) || defined(__64BIT__)
AO_INLINE AO_t
AO_load_acquire(volatile AO_t *addr)
{
  AO_t result;

  /* FIXME: We should get gcc to allocate one of the condition	*/
  /* registers.  I always got "impossible constraint" when I	*/
  /* tried the "y" constraint.					*/
  __asm__ __volatile__ (
    "ld %0,%1\n"
    "cmpw cr7,%0,%0\n"
    "bne- cr7,1f\n"
    "1: isync\n"
    : "=r" (result)
    : "m"(*addr) : "memory", "cc");
  return result;
}
#else
AO_INLINE AO_t
AO_load_acquire(volatile AO_t *addr)
{
  AO_t result;

  /* FIXME: We should get gcc to allocate one of the condition	*/
  /* registers.  I always got "impossible constraint" when I	*/
  /* tried the "y" constraint.					*/
  __asm__ __volatile__ (
    "lwz %0,%1\n"
    "cmpw cr7,%0,%0\n"
    "bne- cr7,1f\n"
    "1: isync\n"
    : "=r" (result)
    : "m"(*addr) : "memory", "cc");
  return result;
}
#endif
#define AO_HAVE_load_acquire

/* We explicitly specify store_release, since it relies 	*/
/* on the fact that lwsync is also a LoadStore barrier.		*/
AO_INLINE void
AO_store_release(volatile AO_t *addr, AO_t value)
{
  AO_lwsync();
  *addr = value;
}

#define AO_HAVE_load_acquire

/* This is similar to the code in the garbage collector.  Deleting 	*/
/* this and having it synthesized from compare_and_swap would probably	*/
/* only cost us a load immediate instruction.				*/
#if defined(__powerpc64__) || defined(__ppc64__) || defined(__64BIT__)
/* Completely untested.  And we should be using smaller objects anyway. */
AO_INLINE AO_TS_VAL_t
AO_test_and_set(volatile AO_TS_t *addr) {
  unsigned long oldval;
  unsigned long temp = 1; /* locked value */

  __asm__ __volatile__(
               "1:ldarx %0,0,%1\n"   /* load and reserve               */
               "cmpdi %0, 0\n"       /* if load is                     */
               "bne 2f\n"            /*   non-zero, return already set */
               "stdcx. %2,0,%1\n"    /* else store conditional         */
               "bne- 1b\n"           /* retry if lost reservation      */
               "2:\n"                /* oldval is zero if we set       */
              : "=&r"(oldval)
              : "r"(addr), "r"(temp)
              : "memory", "cc");

  return (AO_TS_VAL_t)oldval;
}

#else

AO_INLINE AO_TS_VAL_t
AO_test_and_set(volatile AO_TS_t *addr) {
  int oldval;
  int temp = 1; /* locked value */

  __asm__ __volatile__(
               "1:lwarx %0,0,%1\n"   /* load and reserve               */
               "cmpwi %0, 0\n"       /* if load is                     */
               "bne 2f\n"            /*   non-zero, return already set */
               "stwcx. %2,0,%1\n"    /* else store conditional         */
               "bne- 1b\n"           /* retry if lost reservation      */
               "2:\n"                /* oldval is zero if we set       */
              : "=&r"(oldval)
              : "r"(addr), "r"(temp)
              : "memory", "cc");

  return (AO_TS_VAL_t)oldval;
}

#endif

#define AO_have_test_and_set

AO_INLINE AO_TS_VAL_t
AO_test_and_set_acquire(volatile AO_TS_t *addr) {
  AO_TS_VAL_t result = AO_test_and_set(addr);
  AO_lwsync();
  return result;
}

#define AO_HAVE_test_and_set_acquire

AO_INLINE AO_TS_VAL_t
AO_test_and_set_release(volatile AO_TS_t *addr) {
  AO_lwsync();
  return AO_test_and_set(addr);
}

#define AO_HAVE_test_and_set_release

AO_INLINE AO_TS_VAL_t
AO_test_and_set_full(volatile AO_TS_t *addr) {
  AO_TS_VAL_t result;
  AO_lwsync();
  result = AO_test_and_set(addr);
  AO_lwsync();
  return result;
}

#define AO_HAVE_test_and_set_full

#if defined(__powerpc64__) || defined(__ppc64__) || defined(__64BIT__)
/* FIXME: Completely untested.	*/
AO_INLINE int
AO_compare_and_swap(volatile AO_t *addr, AO_t old, AO_t new_val) {
  AO_t oldval;
  int result = 0;

  __asm__ __volatile__(
               "1:ldarx %0,0,%2\n"   /* load and reserve              */
               "cmpd %0, %4\n"      /* if load is not equal to 	*/
               "bne 2f\n"            /*   old, fail			*/
               "stdcx. %3,0,%2\n"    /* else store conditional         */
               "bne- 1b\n"           /* retry if lost reservation      */
	       "li %1,1\n"	     /* result = 1;			*/
               "2:\n"
              : "=&r"(oldval), "=&r"(result)
              : "r"(addr), "r"(new_val), "r"(old), "1"(result)
              : "memory", "cc");

  return result;
}

#else

AO_INLINE int
AO_compare_and_swap(volatile AO_t *addr, AO_t old, AO_t new_val) {
  AO_t oldval;
  int result = 0;

  __asm__ __volatile__(
               "1:lwarx %0,0,%2\n"   /* load and reserve              */
               "cmpw %0, %4\n"      /* if load is not equal to 	*/
               "bne 2f\n"            /*   old, fail			*/
               "stwcx. %3,0,%2\n"    /* else store conditional         */
               "bne- 1b\n"           /* retry if lost reservation      */
	       "li %1,1\n"	     /* result = 1;			*/
               "2:\n"
              : "=&r"(oldval), "=&r"(result)
              : "r"(addr), "r"(new_val), "r"(old), "1"(result)
              : "memory", "cc");

  return result;
}
#endif

#define AO_HAVE_compare_and_swap

AO_INLINE int
AO_compare_and_swap_acquire(volatile AO_t *addr, AO_t old, AO_t new_val) {
  int result = AO_compare_and_swap(addr, old, new_val);
  AO_lwsync();
  return result;
}

#define AO_HAVE_compare_and_swap_acquire

AO_INLINE int
AO_compare_and_swap_release(volatile AO_t *addr, AO_t old, AO_t new_val) {
  AO_lwsync();
  return AO_compare_and_swap(addr, old, new_val);
}

#define AO_HAVE_compare_and_swap_release

AO_INLINE int
AO_compare_and_swap_full(volatile AO_t *addr, AO_t old, AO_t new_val) {
  AO_t result;
  AO_lwsync();
  result = AO_compare_and_swap(addr, old, new_val);
  AO_lwsync();
  return result;
}

#define AO_HAVE_compare_and_swap_full

/* FIXME: We should also implement fetch_and_add and or primitives	*/
/* directly.								*/