main.c

单片机c语言程序设计100例--基于PIC+PROTEUS

//-----------------------------------------------------------------
//  名称: LGM12864液晶显示程序
//-----------------------------------------------------------------
//  说明: 本例运行时,液晶屏将以正常与反白方式显示两行文字.
// 
//-----------------------------------------------------------------
#include <pic.h>
#include "LGM12864.h"
extern INT8U Reverse_Display;
//待显示汉字点阵(在ZIMO软件中取模时,设宋体小四号,纵向取模,字节倒序)
const INT8U WORD_Dot_Matrix_1[] = //ＰＩＣ－单片机
{
0x00,0x02,0xFE,0x42,0x42,0x42,0x42,0x42,0x42,0x42,0x24,0x18,0x00,0x00,0x00,0x00,
0x00,0x08,0x0F,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x02,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x0F,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xF8,0x04,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x04,0x08,0x00,0x00,0x00,
0x00,0x00,0x03,0x04,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x04,0x02,0x00,0x00,0x00,
0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0xF8,0x28,0x29,0x2E,0x2A,0xF8,0x28,0x2C,0x2B,0x2A,0xF8,0x00,0x00,0x00,
0x08,0x08,0x0B,0x09,0x09,0x09,0x09,0xFF,0x09,0x09,0x09,0x09,0x0B,0x08,0x08,0x00,
0x00,0x00,0x00,0xFE,0x10,0x10,0x10,0x10,0x10,0x1F,0x10,0x10,0x10,0x18,0x10,0x00,
0x80,0x40,0x30,0x0F,0x01,0x01,0x01,0x01,0x01,0x01,0x01,0xFF,0x00,0x00,0x00,0x00,
0x08,0x08,0xC8,0xFF,0x48,0x88,0x08,0x00,0xFE,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
0x04,0x03,0x00,0xFF,0x00,0x41,0x30,0x0C,0x03,0x00,0x00,0x00,0x3F,0x40,0x78,0x00
};
const INT8U WORD_Dot_Matrix_2[] = //ＬＣＤ测试程序
{
0x00,0x02,0xFE,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x08,0x0F,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x0E,0x00,0x00,0x00,
0x00,0x00,0xF8,0x04,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x04,0x08,0x00,0x00,0x00,
0x00,0x00,0x03,0x04,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x04,0x02,0x00,0x00,0x00,
0x00,0x02,0xFE,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x02,0x04,0xF8,0x00,0x00,0x00,
0x00,0x08,0x0F,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x08,0x04,0x03,0x00,0x00,0x00,
0x00,0x00,0x00,0x3E,0x2A,0xEA,0x2A,0x2A,0x2A,0xEA,0x2A,0x3E,0x00,0x00,0x00,0x00,
0x20,0x21,0x22,0x2C,0x20,0x3F,0x20,0x20,0x20,0x3F,0x28,0x24,0x23,0x20,0x20,0x00,
0x00,0x20,0x20,0x22,0x22,0x22,0x22,0xE2,0x22,0x22,0x22,0x22,0x22,0x20,0x20,0x00,
0x10,0x08,0x04,0x03,0x00,0x40,0x80,0x7F,0x00,0x00,0x01,0x02,0x0C,0x18,0x00,0x00,
0x08,0x31,0x86,0x60,0x00,0xFE,0x02,0xF2,0x02,0xFE,0x00,0xF8,0x00,0x00,0xFF,0x00,
0x04,0xFC,0x03,0x00,0x80,0x47,0x30,0x0F,0x10,0x67,0x00,0x07,0x40,0x80,0x7F,0x00,
0x40,0x42,0xDC,0x08,0x00,0x90,0x90,0x90,0x90,0x90,0xFF,0x10,0x12,0x1C,0x10,0x00,
0x00,0x00,0x7F,0x20,0x10,0x20,0x20,0x1F,0x10,0x10,0x01,0x06,0x18,0x20,0x78,0x00
};
//-----------------------------------------------------------------
// 主程序
//-----------------------------------------------------------------
void main()
{
    ADCON1 = 6;
    //配置端口
    TRISB = TRISC = 0x00;
    //初始化LCD
    LCD_Initialize();    











}