pci.c

Uboot源码,非常通用的bootloader.适用于各种平台的Linux系统引导.

/*
 * (C) Copyright 2000
 * Wolfgang Denk, DENX Software Engineering, [e-mail].
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 *
 */
/* PCI.c - PCI functions */


#include <common.h>
#ifdef CONFIG_PCI
#include <pci.h>

#ifdef CONFIG_PCI_PNP
void pciauto_config_init(struct pci_controller *hose);
int  pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
#endif

#include "../../Marvell/include/pci.h"

#undef DEBUG
#undef IDE_SET_NATIVE_MODE
static unsigned int local_buses[] = { 0, 0 };

static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
	{0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
	{0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
};

#ifdef CONFIG_USE_CPCIDVI
typedef struct {
	unsigned int base;
	unsigned int init;
} GT_CPCIDVI_ROM_T;

static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
#endif

#ifdef DEBUG
static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
static void gt_pci_bus_mode_display (PCI_HOST host)
{
	unsigned int mode;


	mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
	switch (mode) {
	case 0:
		printf ("PCI %d bus mode: Conventional PCI\n", host);
		break;
	case 1:
		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
		break;
	case 2:
		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
		break;
	case 3:
		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
		break;
	default:
		printf ("Unknown BUS %d\n", mode);
	}
}
#endif

static const unsigned int pci_p2p_configuration_reg[] = {
	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
};

static const unsigned int pci_configuration_address[] = {
	PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
};

static const unsigned int pci_configuration_data[] = {
	PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
	PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
};

static const unsigned int pci_error_cause_reg[] = {
	PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
};

static const unsigned int pci_arbiter_control[] = {
	PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
};

static const unsigned int pci_address_space_en[] = {
	PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
};

static const unsigned int pci_snoop_control_base_0_low[] = {
	PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
};
static const unsigned int pci_snoop_control_top_0[] = {
	PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
};

static const unsigned int pci_access_control_base_0_low[] = {
	PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
};
static const unsigned int pci_access_control_top_0[] = {
	PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
};

static const unsigned int pci_scs_bank_size[2][4] = {
	{PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
	 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
	{PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
	 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
};

static const unsigned int pci_p2p_configuration[] = {
	PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
};


/********************************************************************
* pciWriteConfigReg - Write to a PCI configuration register
*		    - Make sure the GT is configured as a master before writing
*		      to another device on the PCI.
*		    - The function takes care of Big/Little endian conversion.
*
*
* Inputs:   unsigned int regOffset: The register offset as it apears in the GT spec
*		   (or any other PCI device spec)
*	    pciDevNum: The device number needs to be addressed.
*
*  Configuration Address 0xCF8:
*
*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
*  |congif|Reserved|  Bus |Device|Function|Register|00|
*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
*
*********************************************************************/
void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
			unsigned int pciDevNum, unsigned int data)
{
	volatile unsigned int DataForAddrReg;
	unsigned int functionNum;
	unsigned int busNum = 0;
	unsigned int addr;

	if (pciDevNum > 32)	/* illegal device Number */
		return;
	if (pciDevNum == SELF) {	/* configure our configuration space. */
		pciDevNum =
			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
			0x1f;
		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
			0xff0000;
	}
	functionNum = regOffset & 0x00000700;
	pciDevNum = pciDevNum << 11;
	regOffset = regOffset & 0xfc;
	DataForAddrReg =
		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
	GT_REG_READ (pci_configuration_address[host], &addr);
	if (addr != DataForAddrReg)
		return;
	GT_REG_WRITE (pci_configuration_data[host], data);
}

/********************************************************************
* pciReadConfigReg  - Read from a PCI0 configuration register
*		    - Make sure the GT is configured as a master before reading
*		      from another device on the PCI.
*		    - The function takes care of Big/Little endian conversion.
* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
*			spec)
*	    pciDevNum: The device number needs to be addressed.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
*		  cause register to make sure the data is valid
*
*  Configuration Address 0xCF8:
*
*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
*  |congif|Reserved|  Bus |Device|Function|Register|00|
*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
*
*********************************************************************/
unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
			       unsigned int pciDevNum)
{
	volatile unsigned int DataForAddrReg;
	unsigned int data;
	unsigned int functionNum;
	unsigned int busNum = 0;

	if (pciDevNum > 32)	/* illegal device Number */
		return 0xffffffff;
	if (pciDevNum == SELF) {	/* configure our configuration space. */
		pciDevNum =
			(GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
			0x1f;
		busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
			0xff0000;
	}
	functionNum = regOffset & 0x00000700;
	pciDevNum = pciDevNum << 11;
	regOffset = regOffset & 0xfc;
	DataForAddrReg =
		(regOffset | pciDevNum | functionNum | busNum) | BIT31;
	GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
	GT_REG_READ (pci_configuration_address[host], &data);
	if (data != DataForAddrReg)
		return 0xffffffff;
	GT_REG_READ (pci_configuration_data[host], &data);
	return data;
}

/********************************************************************
* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
*				the agent is placed on another Bus. For more
*				information read P2P in the PCI spec.
*
* Inputs:   unsigned int regOffset - The register offset as it apears in the
*	    GT spec (or any other PCI device spec).
*	    unsigned int pciDevNum - The device number needs to be addressed.
*	    unsigned int busNum - On which bus does the Target agent connect
*				  to.
*	    unsigned int data - data to be written.
*
*  Configuration Address 0xCF8:
*
*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
*  |congif|Reserved|  Bus |Device|Function|Register|01|
*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
*
*  The configuration Address is configure as type-I (bits[1:0] = '01') due to
*   PCI spec referring to P2P.
*
*********************************************************************/
void pciOverBridgeWriteConfigReg (PCI_HOST host,
				  unsigned int regOffset,
				  unsigned int pciDevNum,
				  unsigned int busNum, unsigned int data)
{
	unsigned int DataForReg;
	unsigned int functionNum;

	functionNum = regOffset & 0x00000700;
	pciDevNum = pciDevNum << 11;
	regOffset = regOffset & 0xff;
	busNum = busNum << 16;
	if (pciDevNum == SELF) {	/* This board */
		DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
	} else {
		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
			BIT31 | BIT0;
	}
	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
	GT_REG_WRITE (pci_configuration_data[host], data);
}


/********************************************************************
* pciOverBridgeReadConfigReg  - Read from a PCIn configuration register where
*				the agent target locate on another PCI bus.
*			      - Make sure the GT is configured as a master
*				before reading from another device on the PCI.
*			      - The function takes care of Big/Little endian
*				conversion.
* INPUTS:   regOffset: The register offset as it apears in the GT spec (or PCI
*			 spec). (configuration register offset.)
*	    pciDevNum: The device number needs to be addressed.
*	    busNum: the Bus number where the agent is place.
* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
*		  cause register to make sure the data is valid
*
*  Configuration Address 0xCF8:
*
*	31 30	 24 23	16 15  11 10	 8 7	  2  0	   <=bit Number
*  |congif|Reserved|  Bus |Device|Function|Register|01|
*  |Enable|	   |Number|Number| Number | Number |  |	   <=field Name
*
*********************************************************************/
unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
					 unsigned int regOffset,
					 unsigned int pciDevNum,
					 unsigned int busNum)
{
	unsigned int DataForReg;
	unsigned int data;
	unsigned int functionNum;

	functionNum = regOffset & 0x00000700;
	pciDevNum = pciDevNum << 11;
	regOffset = regOffset & 0xff;
	busNum = busNum << 16;
	if (pciDevNum == SELF) {	/* This board */
		DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
	} else {		/* agent on another bus */

		DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
			BIT0 | BIT31;
	}
	GT_REG_WRITE (pci_configuration_address[host], DataForReg);
	GT_REG_READ (pci_configuration_data[host], &data);
	return data;
}


/********************************************************************
* pciGetRegOffset - Gets the register offset for this region config.
*
* INPUT:   Bus, Region - The bus and region we ask for its base address.
* OUTPUT:   N/A
* RETURNS: PCI register base address
*********************************************************************/
static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
{
	switch (host) {
	case PCI_HOST0:
		switch (region) {
		case PCI_IO:
			return PCI_0I_O_LOW_DECODE_ADDRESS;
		case PCI_REGION0:
			return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
		case PCI_REGION1:
			return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
		case PCI_REGION2:
			return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
		case PCI_REGION3:
			return PCI_0MEMORY3_LOW_DECODE_ADDRESS;