xuartlite_l.h

Uboot源码,非常通用的bootloader.适用于各种平台的Linux系统引导.

/*****************************************************************************
*
*	XILINX IS PROVIDING THIS DESIGN, CODE, OR INFORMATION "AS IS"
*	AS A COURTESY TO YOU, SOLELY FOR USE IN DEVELOPING PROGRAMS AND
*	SOLUTIONS FOR XILINX DEVICES.  BY PROVIDING THIS DESIGN, CODE,
*	OR INFORMATION AS ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
*	APPLICATION OR STANDARD, XILINX IS MAKING NO REPRESENTATION
*	THAT THIS IMPLEMENTATION IS FREE FROM ANY CLAIMS OF INFRINGEMENT,
*	AND YOU ARE RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY REQUIRE
*	FOR YOUR IMPLEMENTATION.  XILINX EXPRESSLY DISCLAIMS ANY
*	WARRANTY WHATSOEVER WITH RESPECT TO THE ADEQUACY OF THE
*	IMPLEMENTATION, INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
*	REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE FROM CLAIMS OF
*	INFRINGEMENT, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
*	FOR A PARTICULAR PURPOSE.
*
*	(c) Copyright 2002 Xilinx Inc.
*	All rights reserved.
*
*****************************************************************************/
/****************************************************************************/
/**
*
* @file xuartlite_l.h
*
* This header file contains identifiers and low-level driver functions (or
* macros) that can be used to access the device.  High-level driver functions
* are defined in xuartlite.h.
*
* <pre>
* MODIFICATION HISTORY:
*
* Ver	Who  Date     Changes
* ----- ---- -------- -----------------------------------------------
* 1.00b rpm  04/25/02 First release
* </pre>
*
*****************************************************************************/

#ifndef XUARTLITE_L_H /* prevent circular inclusions */
#define XUARTLITE_L_H /* by using protection macros */

/***************************** Include Files ********************************/

#include "xbasic_types.h"
#include "xio.h"

/************************** Constant Definitions ****************************/

/* UART Lite register offsets */

#define XUL_RX_FIFO_OFFSET		0   /* receive FIFO, read only */
#define XUL_TX_FIFO_OFFSET		4   /* transmit FIFO, write only */
#define XUL_STATUS_REG_OFFSET		8   /* status register, read only */
#define XUL_CONTROL_REG_OFFSET		12  /* control register, write only */

/* control register bit positions */

#define XUL_CR_ENABLE_INTR		0x10	/* enable interrupt */
#define XUL_CR_FIFO_RX_RESET		0x02	/* reset receive FIFO */
#define XUL_CR_FIFO_TX_RESET		0x01	/* reset transmit FIFO */

/* status register bit positions */

#define XUL_SR_PARITY_ERROR		0x80
#define XUL_SR_FRAMING_ERROR		0x40
#define XUL_SR_OVERRUN_ERROR		0x20
#define XUL_SR_INTR_ENABLED		0x10	/* interrupt enabled */
#define XUL_SR_TX_FIFO_FULL		0x08	/* transmit FIFO full */
#define XUL_SR_TX_FIFO_EMPTY		0x04	/* transmit FIFO empty */
#define XUL_SR_RX_FIFO_FULL		0x02	/* receive FIFO full */
#define XUL_SR_RX_FIFO_VALID_DATA	0x01	/* data in receive FIFO */

/* the following constant specifies the size of the FIFOs, the size of the
 * FIFOs includes the transmitter and receiver such that it is the total number
 * of bytes that the UART can buffer
 */
#define XUL_FIFO_SIZE		    16

/* Stop bits are fixed at 1. Baud, parity, and data bits are fixed on a
 * per instance basis
 */
#define XUL_STOP_BITS		    1

/* Parity definitions
 */
#define XUL_PARITY_NONE		    0
#define XUL_PARITY_ODD		    1
#define XUL_PARITY_EVEN		    2

/**************************** Type Definitions ******************************/

/***************** Macros (Inline Functions) Definitions ********************/

/*****************************************************************************
*
* Low-level driver macros and functions. The list below provides signatures
* to help the user use the macros.
*
* void XUartLite_mSetControlReg(u32 BaseAddress, u32 Mask)
* u32 XUartLite_mGetControlReg(u32 BaseAddress)
* u32 XUartLite_mGetStatusReg(u32 BaseAddress)
*
* Xboolean XUartLite_mIsReceiveEmpty(u32 BaseAddress)
* Xboolean XUartLite_mIsTransmitFull(u32 BaseAddress)
* Xboolean XUartLite_mIsIntrEnabled(u32 BaseAddress)
*
* void XUartLite_mEnableIntr(u32 BaseAddress)
* void XUartLite_mDisableIntr(u32 BaseAddress)
*
* void XUartLite_SendByte(u32 BaseAddress, u8 Data);
* u8 XUartLite_RecvByte(u32 BaseAddress);
*
*****************************************************************************/

/****************************************************************************/
/**
*
* Set the contents of the control register. Use the XUL_CR_* constants defined
* above to create the bit-mask to be written to the register.
*
* @param    BaseAddress is the base address of the device
* @param    Mask is the 32-bit value to write to the control register
*
* @return   None.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mSetControlReg(BaseAddress, Mask) \
		    XIo_Out32((BaseAddress) + XUL_CONTROL_REG_OFFSET, (Mask))


/****************************************************************************/
/**
*
* Get the contents of the control register. Use the XUL_CR_* constants defined
* above to interpret the bit-mask returned.
*
* @param    BaseAddress is the	base address of the device
*
* @return   A 32-bit value representing the contents of the control register.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mGetControlReg(BaseAddress) \
		    XIo_In32((BaseAddress) + XUL_CONTROL_REG_OFFSET)


/****************************************************************************/
/**
*
* Get the contents of the status register. Use the XUL_SR_* constants defined
* above to interpret the bit-mask returned.
*
* @param    BaseAddress is the	base address of the device
*
* @return   A 32-bit value representing the contents of the status register.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mGetStatusReg(BaseAddress) \
		    XIo_In32((BaseAddress) + XUL_STATUS_REG_OFFSET)


/****************************************************************************/
/**
*
* Check to see if the receiver has data.
*
* @param    BaseAddress is the	base address of the device
*
* @return   XTRUE if the receiver is empty, XFALSE if there is data present.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mIsReceiveEmpty(BaseAddress) \
	  (!(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_RX_FIFO_VALID_DATA))


/****************************************************************************/
/**
*
* Check to see if the transmitter is full.
*
* @param    BaseAddress is the	base address of the device
*
* @return   XTRUE if the transmitter is full, XFALSE otherwise.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mIsTransmitFull(BaseAddress) \
		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_TX_FIFO_FULL)


/****************************************************************************/
/**
*
* Check to see if the interrupt is enabled.
*
* @param    BaseAddress is the	base address of the device
*
* @return   XTRUE if the interrupt is enabled, XFALSE otherwise.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mIsIntrEnabled(BaseAddress) \
		(XUartLite_mGetStatusReg((BaseAddress)) & XUL_SR_INTR_ENABLED)


/****************************************************************************/
/**
*
* Enable the device interrupt. Preserve the contents of the control register.
*
* @param    BaseAddress is the	base address of the device
*
* @return   None.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mEnableIntr(BaseAddress) \
	       XUartLite_mSetControlReg((BaseAddress), \
		   XUartLite_mGetControlReg((BaseAddress)) | XUL_CR_ENABLE_INTR)


/****************************************************************************/
/**
*
* Disable the device interrupt. Preserve the contents of the control register.
*
* @param    BaseAddress is the	base address of the device
*
* @return   None.
*
* @note	    None.
*
*****************************************************************************/
#define XUartLite_mDisableIntr(BaseAddress) \
	      XUartLite_mSetControlReg((BaseAddress), \
		  XUartLite_mGetControlReg((BaseAddress)) & ~XUL_CR_ENABLE_INTR)


/************************** Function Prototypes *****************************/

void XUartLite_SendByte(u32 BaseAddress, u8 Data);
u8 XUartLite_RecvByte(u32 BaseAddress);


#endif		  /* end of protection macro */