📄 common.h
字号:
//////////////////////////////////////////////////////////////////////////////
// (c) Copyright Microview Technologies, Inc. 2004. All Rights Reserved.
//
// Module: Common.H
//
// Abstract: Header file for MVAPI.DLL
//
// VER: 5.0.1.5
//
// Data: 2006.04.20
//
/////////////////////////////////////////////////////////////////////////////
#ifndef _COMMON_H_
#define _COMMON_H_
#include "Windows.h"
#include "MVBOARD1.h"
#include "MVBOARD2.h"
enum RUNOPER
{
MVSTOP = 0,
MVRUN = 1,
MVPAUSE = 2,
MVQUERYSTATU = 3,
MVERROR = 4
};
// MVSTOP: 停止工作； MVRUN: 卡开始工作； MVPAUSE: 暂停卡的工作； MVQUERYSTATU: 查询卡的当前状态， MVERROR:为错误的状态。
enum VIDEOSOURCE
{
COMPOSITE = 0,
SVIDEO = 1,
R_G_B = 2,
Y_CR_CB = 3
};
enum VIDEOSTANDARD
{
PAL = 0,
NTSC = 1,
OTHER = 2/*SCAM*/
};
enum RGBVECTOR
{
R_LUM = 0,
G_LUM = 1,
B_LUM = 2,
R_COARSE = 3,
G_COARSE = 4,
B_COARSE = 5
};
enum MV_PARAMTER
{
GET_BOARD_TYPE = 0,
GET_GRAPHICAL_INTERFACE = 1,
SET_GARBIMAGEINFO = 2,
SET_DISPIMAGEINFO = 3,
BUFFERTYPE = 4,
DEFAULT_PARAM = 5,
// 控制显示的
DISP_PRESENCE = 6,
DISP_WHND = 7,
DISP_TOP = 8,
DISP_LEFT = 9,
DISP_HEIGHT = 10,
DISP_WIDTH = 11,
// 控制A/D的调节参数
ADJUST_STANDARD = 12,
ADJUST_SOURCE = 13,
ADJUST_CHANNEL = 14,
ADJUST_LUMINANCE = 15,
ADJUST_CHROMINANE = 16,
ADJUST_SATURATION = 17,
ADJUST_HUE = 18,
ADJUST_CONTRAST = 19,
//支持RGB卡
ADJUST_R_LUM = 20,
ADJUST_G_LUM = 21,
ADJUST_B_LUM = 22,
ADJUST_R_COARSE = 23,
ADJUST_G_COARSE = 24,
ADJUST_B_COARSE = 25,
// 控制板卡的捕获参数
GRAB_XOFF = 60,
GRAB_YOFF = 61,
GRAB_HEIGHT = 62,
GRAB_WIDTH = 63,
GRAB_IN_HEIGHT = 64,
GRAB_IN_WIDTH = 65,
GRAB_BITDESCRIBE = 66,
GRAB_WHOLEWIDTH = 67,
// 控制板卡的工作参数
WORK_UPDOWN = 34,
WORK_FLIP = 35,
WORK_SKIP = 36,
WORK_SYNC = 37,
WORK_INTERLACE = 38,
WORK_ISBLACK = 39,
WORK_FIELD = 40,
OSD_MODE = 41,
//支持V500系列卡
TENBIT_MODE = 42,
OUTPUT_VIDEO = 43,
FILERSELECT1 = 44,
FILERSELECT2 = 45,
// 控制板卡的捕获参数(保留,兼容老版本)
GARB_XOFF = 26,
GARB_YOFF = 27,
GARB_HEIGHT = 28,
GARB_WIDTH = 29,
GARB_IN_HEIGHT = 30,
GARB_IN_WIDTH = 31,
GARB_BITDESCRIBE = 32,
GARB_WHOLEWIDTH = 33,
//shen add
//支持卡类型MVBOARD2.h中所有卡
ADJUST_BACKCOLORKEY = 200,
DISP_FLIP = 201,
IMAGE_PROCESS = 202,
VIDEO_SINGLE = 203,
GET_BOARD_PASS = 204,
//20050407新增
RESTARTCAPTURE = 300,
RESTOPCAPTURE = 301,
//20060315
GRAB_AUTOFIELD = 205,
};
// 控制板卡使用的缓存类型, 对应BUFFERTYPE
#define SYSTEM_MEMORY_DX 0 // 系统内存显示方式, 支持所有的选项,如左右翻转, 该方式下采集不丢帧，显示可能会丢帧;
#define SYSTEM_MEMORY_GDI 1 // GDI系统内存显示方式, 支持所有的选项, 如左右翻转, 该方式下采集不丢帧, 显示可能会丢帧;
#define VIDEO_MEMORY 2 // 直接显存显示方式, 只有在显示位数和采集位数相等时采用, 该方式下支持不丢帧显示而采集丢
// 帧或不支持采集; 对于M10，RGB10，M20，RGB20型卡不支持所有的选项(如左右翻转)。
#define RECEDE_NOISES 3 // 对于M10，RGB10，M20，RGB20型卡不支持，而V3型卡为4帧平均方式
// 控制系统的显示工作状态，对应DISP_PRESENCE
#define SHOW_CLOSE 0 // 显示关闭
#define SHOW_OPEN 1 // 显示打开
// 控制视频采集标准，对应ADJUST_STANDARD
#define SIGNAL_PAL 0 // PAL
#define SIGNAL_NTSC 1 // NTSC
#define SIGNAL_NONSTANDARD 2 // 对于M20，RGB20
// 控制视频信号的输入源, 对应ADJUST_SOURCE
#define SVIDEO_IN 1 // SVIDEO输入
#define COMPOSITE_IN 0 // 复合输入
// 控制视频信号输入源的通道, 对应ADJUST_CHANNEL
#define CHANNEL_0 0
#define CHANNEL_1 1
#define CHANNEL_2 2
#define CHANNEL_3 3
#define CHANNEL_4 4
#define CHANNEL_5 5
#define CHANNEL_6 6
#define CHANNEL_7 7
#define CHANNEL_8 8
#define CHANNEL_9 9
// 控制视频捕获的格式，对应GARB_BITDESCRIBE
#define DATA_MONOCHOY8 0
#define DATA_RGB1555 1
#define DATA_CO_RGB24 2
#define DATA_aRGB8888 3
#define DATA_RGB8332 4
#define DATA_CO_RGB565 5
#define DATA_RGB5515 6
#define DATA_CO_YUV444 7
#define DATA_CO_YUV422 8
#define DATA_YUV411 9
// 控制板卡的翻转工作参数，对应WORK_UPDOWN和WORK_FLIP
#define NON_TURN 0 // 不翻转
#define TURN 1 // 翻转
// 控制板卡的跳行采集工作参数，对应WORK_SKIP, 即对于隔行信号一帧中偶奇场的存储是按帧方式还是按先偶场后奇场
#define FLATNESS 0 // 一帧中偶奇场的存储是按偶场后奇场
#define INTERLUDE 1 // 一帧中偶奇场的存储是按帧方式
// 控制板卡的同步信号的来源, 对应WORK_SYNC
#define SYN_RED 0 // 红路信号带复合同步;
#define SYN_GREEN 1 // 绿路信号带复合同步;
#define SYN_BLUE 2 // 兰路信号带复合同步;
#define SYN_OUTSIDE 3 // 外同步；
#define SYN_RESERVE 4 // 保留不使用;
#define SYN_SEPARATE 5 // 同步信号行场分离;
#define SYN_INSIDE1 6 // 内同步1
#define SYN_INSIDE2 7 // 内同步2
// 控制板卡的信号种类, 对应WORK_INTERLACE
#define LINE_BY_LINE 0 // 逐行
#define INTERLEAVED 1 // 隔行
// 控制板卡在采集信号时对灰度级的范围, 对应WORK_ISBLACK, 该类型仅对M10，RGB10，M20，RGB20系列卡有效，
#define BOGUS_COLOR 0 // 伪彩采集
#define FULL_COLOR 1 // 全灰阶采集。
// 控制板卡在采集信号时场或按帧采集, 对应WORK_FIELD
#define COLLECTION_FRAME 0 // 按帧采集
#define COLLECTION_FIELD 1 // 按场采集
// 控制板卡的OSD模式, 对应OSD_MODE。该类型仅对V3、V5系列卡有效
#define OSD_NON 0 // 无OSD
#define OSD_ZERO 1 // 0屏蔽OSD
#define OSD_ONE 2 // 1屏蔽OSD
typedef struct _MV_IMAGEINFO_
{
ULONG Length; // 图像的大小，以字节计
ULONG nColor; // 图像的颜色
ULONG Heigth; // 图像的高
ULONG Width; // 图像的宽
ULONG SkipPixel; // 每行跳过的像素
}MV_IMAGEINFO, *PMV_IMAGEINFO;
enum CALLBACKTYPE{ BEFORE_PROCESS = 0, AFTER_PROCESS = 1, NO_USED = 2 };
typedef BOOL (WINAPI *CALLBACKFUNC)( PVOID pData, PMV_IMAGEINFO pImageInfo, PVOID pUserData, ULONG Index );
typedef VOID (WINAPI *PTRIGGEROUTINE)( ULONG UniquelyID, ULONG Reson, PVOID pContext );
typedef VOID (WINAPI *CONTINUEGARBMECHANISM)( PVOID pData, PMV_IMAGEINFO pImage, ULONG ImageNumber,
ULONG wholeLength, PVOID pUserData );
typedef struct _MV_NOTIFY_
{
union
{
CONTINUEGARBMECHANISM pContinueCall;
PTRIGGEROUTINE pTirggerCall;
}u;
PVOID pContext;
}MV_NOTIFY, *PMV_NOTIFY;
#define B_CHANNEL 0x00000001
#define G_CHANNEL 0x00000002
#define R_CHANNEL 0x00000004
typedef struct _MV_RGB_
{
HWND R_hWnd;
RECT R_Rect;
HWND G_hWnd;
RECT G_Rect;
HWND B_hWnd;
RECT B_Rect;
}MV_RGB, *PMV_RGB;
enum MV_FILETYPE{ RAW = 0, BMP = 1, JPEG = 2 };
enum VIDEOSIGNAL
{
GLLEVEL = 0,
DIVIDER = 1,
ISINTERLACE = 2,
XSHIFT = 3,
YSHIFT = 4,
XSIZE = 5,
YSIZE = 6,
VCOR = 7,
VCOG = 8,
LP = 9,
LINEFREQENCY = 10,
LINETOTAL = 11,
LINEACTIVETIME = 12,
LINESYNTIME = 13,
LINESHOULDER = 14,
FRAMENUM = 15,
FIELDSYNTIME = 16,
FIELDTOTAL = 17,
FIELDSHOULDER = 18,
SOURFREQ = 19,
FREQSUB = 20
};
struct GDIOPERATION;
typedef GDIOPERATION *PGDIOPERATION;
typedef VOID (WINAPI *GDIOPERATIONFUNC)( PGDIOPERATION pOper, PVOID pVal1, PVOID pVal2, PVOID pVal3 );
typedef struct GDIOPERATION
{
PVOID pIs;
GDIOPERATIONFUNC SetGDIText;
GDIOPERATIONFUNC SetGDITextColor;
GDIOPERATIONFUNC SetGDITextFormat;
GDIOPERATIONFUNC SetGDITextPosition;
GDIOPERATIONFUNC SetGDIGraph;
GDIOPERATIONFUNC SetGDIGraphPen;
GDIOPERATIONFUNC SetGDICanCalAll;
GDIOPERATIONFUNC SetGDICanCalOne;
}GDIOPERATION, *PGDIOPERATION;
#endif⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -