macro.h.bak

HT46RB50温度计,了解其usb通信

;;Established date:                  

;;********************************************************************
;;*********************Valiable Section*******************************
;;********************************************************************
DATA.     SECTION	'DATA'
;;--------------------------------------------------------------------
;;PUSH & POP
M_ACCBAK		DB	?
M_STABAK		DB	?
M_MP0BAK		DB 	?
M_MP1BAK		DB	?
M_TBLPBAK		DB	?
;;--------------------------------------------------------------------
M_ACCTimer		DB        ?
M_StatusTimer                DB        ?
M_MP0Timer                   DB        ?
M_TBLPFIFO		DB	?		;;save TBLP.

M_Temp1			DB	?
M_Temp2			DB	?                 
M_STALL			DB	?
M_ReportIndex		DB	? 		;;report index                  
M_DescriptorLength	DB	? 		;;save the length of descriptir                 
M_DataPacketLength	DB	?  		;;save the length of Data Packet                
M_FIFOBAK0		DB	?		;;save FIFO data
M_FIFOBAK1		DB	?
M_FIFOBAK2		DB	?
M_FIFOBAK3		DB	?
M_FIFOBAK4		DB	?
M_FIFOBAK5		DB	?
M_FIFOBAK6		DB	?
M_FIFOBAK7		DB	?
M_FIFOAddress		DB	?		;;save FIFO's address
M_IdleTime		DB	?
M_DeviceAddress		DB	?
M_EndpointNO		DB	?                
M_DataLengthL		DB	?
M_DataLengthH		DB	? 
;;----------------------------------------------------
M_Receiver                   DB        ? 
M_OutputReportDataSize       DB        ?                  
M_InputReportDataSize        DB        ?
M_TrDataBits                 DB        ?                  ;;HT82M99E transmit to RS232 device data.
M_ReDataBits                 DB        ?
M_TransmitData               DB        ?                  ;;RS232 device transmit to HT82M99E data.
M_ReceiveData                DB        ?
M_TrBaudRateL                DB        ?
M_TrBaudRateH                DB        ?
M_ReBaudRateL                DB        ?
M_ReBaudRateH                DB        ?
M_ReBufferAddress            DB        ?                   
M_TrBufferAddress            DB        ?                  
M_ReceiveBuffer              DB        32   DUP(?)        ;;HT82M99E receiver data from rs232 device buffer.
;;---------------------------------------------------

M_Flag0                      DB        ?
F_AddressStatus		EQU	M_Flag0.0	;;Address status flag         
F_ConfigurationStatus	EQU	M_FLAG0.1          
F_ControlEvent		EQU	M_FLAG0.2	;;Setup was already?(0:no setup 1:setup)          
F_SetupData		EQU	M_FLAG0.3	;;Setup Data flag          
F_SendData		EQU	M_FLAG0.4	;;send Data flag          
F_RemoteWakeup		EQU	M_FLAG0.5  	;;suport remote wakeup(1)        
F_RdHighTable		EQU 	M_FLAG0.6	;;If F_RdHighTable is 1 then indicated read high byte of table. If F_RdHighTable is 0 then indicated read low byte of table.
F_BufferFull		EQU	M_FLAG0.7	;;if the buffer is full,then this flag set 1
M_FLAG1                      DB        ?
F_SendContinue		EQU	M_FLAG1.0	;;flag of send data not load finally.
F_DataUpdate		EQU	M_FLAG1.1	;;flag of data which in FIFO was updata.(????)
F_ReportProtocol	EQU	M_FLAG1.2          
F_TimerInterruptEnable       EQU       M_FLAG1.3
F_Polling                    EQU       M_FLAG1.4       

M_TEST	DB	?   
;;********************************************************************
;;*********************Constant Section*******************************
;;********************************************************************
@USB_Req		EQU	0H
@USB_Tx			EQU	1H
@Clear   		EQU 	2H
@SetupToken     	EQU	5H
@Ready 			EQU 	6H
@Packet0    		EQU 	7H
;;
F_Suspend		EQU	USC.0
F_USBReset		EQU	USC.2		;;if the flag is 1 indicated USB device attached.
F_Resume		EQU	USC.3
;;
F_AccessEP0		EQU	USR.0
F_AccessEP1		EQU	USR.1
;;
F_USBClockOn		EQU	UCC.3
F_Suspend2		EQU	UCC.4		;;This bit is used for decreasing power consumption in suspend mode.(it is only used in 82K96E)
F_FsysClock		EQU	UCC.6
;;
P_RXD                        EQU       PB2    
P_TXD                        EQU       PB3   
P_RTS                        EQU       PA0
;;
T_RequestType		EQU	M_FIFOBAK0
T_RequestNUM		EQU	M_FIFOBAK1
T_ValueL		EQU	M_FIFOBAK2
T_ValueH		EQU	M_FIFOBAK3
T_IndexL		EQU	M_FIFOBAK4
T_IndexH		EQU	M_FIFOBAK5
T_LengthL		EQU	M_FIFOBAK6
T_LengthH		EQU	M_FIFOBAK7
;;
C_RequestType		EQU	60H		;;setup common's Requeset Type
C_FIFOSize		EQU	08H		;;Max FIFO count in one packet
C_RamAddress		EQU	40H		;;The start address of general data register is 40H
C_RamNumber		EQU	0C0H		;;The number of general data register is 192
C_PollingL                   EQU       0ECH                ;;98H
C_PollingH                   EQU       0FFH
;;C_USBRegisterBank	EQU	01H		;;no need in HT46RB50
C_Addr_Wakeup		EQU 	23H                 
C_STALL			EQU 	24H   
C_SIES			EQU	25H              
C_MISC			EQU	26H
C_FIFO0Address		EQU	28H
C_FIFO1Address		EQU	29H
C_InterfaceNO		EQU	02H		;Interface Number=2
C_LanguageIDL		EQU	09H
C_LanguageIDH		EQU	04H
C_DeviceDescriptorLength	EQU	12H
C_ConfigurationDesLength	EQU	22H
C_ReportDescriptorLength	EQU	35H
C_HIDDescriptorLength	EQU	09H
C_ReportType		EQU	04H		;Report Type
C_SetReport		EQU	01H
C_ReportSize		EQU	08H
C_DataBits                   EQU       09H                 
C_ReceiveBufferSize          EQU       1FH                
;;for transmit delay time
C_TrBaudRate9600L            EQU       68H
C_TrBaudRate9600H            EQU       01H
C_ReBaudRate9600L            EQU       0C7H
C_ReBaudRate9600H            EQU       0FEH
;;*********************************************************************
M_PUSH	MACRO
	MOV	M_ACCBAK,A
	MOV	A,STATUS
	MOV  	M_STABAK,A
	MOV    	A,MP0
	MOV  	M_MP0BAK,A
	MOV  	A,MP1
	MOV	M_MP1BAK,A
	MOV  	A,TBLP
	MOV   	M_TBLPBAK,A
	ENDM
;;********************************************************************
M_POP		MACRO
	MOV 	A,M_STABAK
	MOV  	STATUS,A
	MOV   	A,M_MP0BAK
	MOV   	MP0,A
	MOV  	A,M_MP1BAK
	MOV  	MP1,A
	MOV 	A,M_TBLPBAK
	MOV 	TBLP,A
	MOV  	A,M_ACCBAK
	ENDM
;;*********************************************************************