init_tny.a51

Keil C51 V6.21的安装程序_Keil C51下载

;------------------------------------------------------------------------------
;  This file is part of the C51 Compiler package
;  Copyright (c) 1988-2001 Keil Elektronik GmbH and Keil Software, Inc.
;------------------------------------------------------------------------------
;  INIT_TNY.A51:  This code is executed, if the application program contains
;  initialized variables at file level.  This file is a reduced version of the
;  INIT.A51 file and can be used for projects that do not contain XDATA memory
;  initilizations.
;
;  If you are using uVision2, just add the file as last file to your project.
;  *** IMPORTANT NOTE ***:  this file needs to be the last file of the linker 
;  input list.  If you are using uVision2 this file should be therefore the 
;  last file in your project tree.can
;
;
;  To translate this file manually use Ax51 with the following invocation:
;
;     Ax51 INIT_TNY.A51
;
;  To link the modified INIT.OBJ file to your application use the following
;  BL51/LX51 invocation:
;
;     Lx51 <your object file list>, INIT_TNY.OBJ <controls>
;
;------------------------------------------------------------------------------
;
;  User-defined Watch-Dog Refresh.
;
;  If the C application contains many initialized variables uses a watchdog
;  it might be possible that the user has to include a watchdog refresh into
;  the initialization process. The watchdog refresh routine can be included
;  in the following MACRO and can alter all CPU registers except
;  DPTR.
;
WATCHDOG	MACRO
				; Include any Watchdog refresh code here
		ENDM
;------------------------------------------------------------------------------

		NAME	?C_INIT


?C_C51STARTUP	SEGMENT   CODE
?C_INITSEG	SEGMENT   CODE		; Segment with Initializing Data


		EXTRN CODE (MAIN)
		PUBLIC	?C_START

		RSEG	?C_C51STARTUP
INITEND:	AJMP	MAIN

IorPData:				; If CY=1 PData Values
		CLR	A
		MOVC	A,@A+DPTR
		INC	DPTR
		MOV	R0,A		; Start Address
IorPLoop:	CLR	A
		MOVC	A,@A+DPTR
		INC	DPTR
		MOV	@R0,A
Common:		INC	R0
		DJNZ	R7,IorPLoop
		SJMP	Loop

Bits:		CLR	A
		MOVC	A,@A+DPTR
		INC	DPTR
		MOV	R0,A
		ANL	A,#007H
		ADD	A,#Table-LoadTab
		XCH	A,R0
		CLR	C	
		RLC	A		; Bit Condition to Carry
		SWAP	A
		ANL	A,#00FH
		ORL	A,#20H		; Bit Address
		XCH	A,R0		; convert to Byte Addressen
		MOVC	A,@A+PC
LoadTab:	JC	Setzen
		CPL	A
		ANL	A,@R0
		SJMP	BitReady
Setzen:		ORL	A,@R0
BitReady:	MOV	@R0,A
		DJNZ	R7,Bits
		SJMP	Loop

Table:		DB	00000001B
		DB	00000010B
		DB	00000100B
		DB	00001000B
		DB	00010000B
		DB	00100000B
		DB	01000000B
		DB	10000000B
		

?C_START:	
		MOV	DPTR,#?C_INITSEG
LOOP:		CLR	A
		MOV	R6,#1
		MOVC	A,@A+DPTR
		JZ	INITEND
		INC	DPTR
		MOV	R7,A
		ANL	A,#3FH
		JNB	ACC.5,NOBIG
		ANL	A,#01FH
		MOV	R6,A
		CLR	A
		MOVC	A,@A+DPTR
		INC	DPTR
		JZ	NOBIG
		INC	R6
NOBIG:		XCH	A,R7
		ANL	A,#0C0H		; Typ is in Bit 6 and Bit 7
		ADD	A,ACC
		JZ	IorPDATA
		JC	Bits
		SJMP	$

		RSEG	?C_INITSEG
		DB	0

;-------------------------------------------------------------------------
; STRUCTURE OF THE INITIALIZATION INFORMATION
; -------------------------------------------
; This section describes the initialization data generated by C51 for
; explicit variable initializations (in segment ?C_INITSEC).
;
; Explicit variable initilizations at C source level are stored by C51 in
; the segment ?C_INITSEC.  All partial segments are combined at linker level
; to one segment.  The segment end value DB 0 is taken from this library module
; INIT.A51.
;
; Structure of the ?C_INITSEC information:
;     <Info> (see below) [BYTE]                      ----+  repeated
;     <additional info>  [BYTES depend on Info]      ----+  repeated
;     0x00               [BYTE]   <end of list mark>
;
;  <Info> has the following format:
;
;  Bit      7  6  5  4  3  2  1  0
;  <Info>   T  T  B  L  L  L  L  L    T=Type  B=BIGBIT  L=LENGTH
;
;  If BIGBIT is set, another LENGTH BYTE FOLLOWS.  The LENGHT
;  info of the first byte is then the HIGH part.
;
;  Typ is one of the following:
;  0  := IDATA init values;  the following bytes follow:
;        -  1 byte address
;        -  init data bytes according LENGTH specification
;
;  1  := XDATA init values;  the following bytes follow:
;        -  2 byte address (high byte first)
;        -  init data bytes according LENGTH specification
;
;  2  := PDATA init values;  the following bytes follow:
;        -  1 byte address
;        -  init data bytes according LENGTH specification
;
;  3, BIGBIT=0  := BIT init values; the followign bytes follow:
;        -  1 byte for each bit according LENGTH specification
;           this byte has the following format:
;
;           Bit    7  6  5  4  3  2  1  0
;                  I  B  B  B  B  B  B  B   I := state of the bit
;                                           B := bit address
;
;  3, BIGBIT=1  := HDATA init values;   the following bytes follow:
;        -  another LENGTH byte (since BIGBIT is always 1)
;        -  3 byte address  (MSB first)
;        -  data bytes according LENGTH specification
;
;----------------------------------------------------------------------

		END