oomisc.pas

Async Professional 4.04

  {deprecated modem message types, note that some conflict with new messages}
  apw_ModemOk            = apw_First+40;  {From modem - got OK response}
  apw_ModemConnect       = apw_First+41;  {From modem - got CONNECT response}
  apw_ModemBusy          = apw_First+42;  {From modem - got BUSY response}
  apw_ModemVoice         = apw_First+43;  {From modem - got VOICE response}
  apw_ModemNoCarrier     = apw_First+44;  {From modem - got NO CARRIER response}
  apw_ModemNoDialTone    = apw_First+45;  {From modem - got NO DIALTONE response}
  apw_ModemError         = apw_First+46;  {From modem - got ERROR response}
  apw_GotLineSpeed       = apw_First+47;  {From modem - got connect speed}
  apw_GotErrCorrection   = apw_First+48;  {From modem - got EC response}
  apw_GotDataCompression = apw_First+49;  {From modem - got compression response}
  apw_CmdTimeout         = apw_First+50;  {From modem - command timed out}
  apw_DialTimeout        = apw_First+51;  {From modem - dial timed out}
  apw_AnswerTimeout      = apw_First+52;  {From modem - answer timed out}
  apw_DialCount          = apw_First+53;  {From modem - dial still in progress}
  apw_AnswerCount        = apw_First+54;  {From modem - answer still in progress}
  apw_ModemRing          = apw_First+55;  {From modem - phone rang}
  apw_ModemIsConnected   = apw_First+56;  {From modem - connection completed}
  apw_ConnectFailed      = apw_First+57;  {From modem - connection failed}
  apw_CommandProcessed   = apw_First+58;  {From modem - finished command}

const
  {Terminal message types}
  apw_TermStart          = apw_First+60;  {To terminal - start}
  apw_TermStop           = apw_First+61;  {To terminal - stop}
  apw_TermSetCom         = apw_First+62;  {To terminal - set com handle}
  apw_TermRelCom         = apw_First+63;  {To terminal - release com handle}
  apw_TermSetEmuPtr      = apw_First+64;  {To terminal - set emulator pointer}
  apw_TermSetEmuProc     = apw_First+65;  {To terminal - set emulator proc}
  apw_TermClear          = apw_First+66;  {To terminal - clear window}
  apw_TermBuffer         = apw_First+67;  {To terminal - alloc new buffers}
  apw_TermColors         = apw_First+68;  {To terminal - set new colors}
  apw_TermToggleScroll   = apw_First+69;  {To terminal - toggle scrollback}
  apw_TermCapture        = apw_First+70;  {To terminal - set capture mode}
  apw_TermStuff          = apw_First+71;  {To terminal - stuff data}
  apw_TermPaint          = apw_First+72;  {To terminal - update screen}
  apw_TermSetWndProc     = apw_First+73;  {To terminal - set window proc}
  apw_TermColorsH        = apw_First+74;  {To terminal - set highlight colors}
  apw_TermSave           = apw_First+75;  {To terminal - save/restore}
  apw_TermColorMap       = apw_First+76;  {To terminal - get/set color map}
  apw_TermForceSize      = apw_First+77;  {To terminal - force new size}
  apw_TermFontSize       = apw_First+78;  {To terminal - get font size}

const
  apw_TermStatus         = apw_First+80;  {From terminal - show status}
  apw_TermBPlusStart     = apw_First+81;  {From terminal - B+ is starting}
  apw_TermError          = apw_First+82;  {From terminal - error}
  apw_CursorPosReport    = apw_First+83;  {From terminal - Cursor Pos Report}

const
  apw_FaxCvtStatus       = apw_First+90;  {From fax converter - show status}
  apw_FaxUnpStatus       = apw_First+91;  {From fax unpacker - show status}
  apw_FaxOutput          = apw_First+92;  {From fax unpacker - output line}

const
  apw_ViewSetFile        = apw_First+100; {To fax viewer - change file name}
  apw_ViewSetFG          = apw_First+101; {To fax viewer - set foreground color}
  apw_ViewSetBG          = apw_First+102; {To fax viewer - set background color}
  apw_ViewSetScale       = apw_First+103; {To fax viewer - set scale factors}
  apw_ViewSetScroll      = apw_First+104; {To fax viewer - set scroll increments}
  apw_ViewSelectAll      = apw_First+105; {To fax viewer - select entire image}
  apw_ViewSelect         = apw_First+106; {To fax viewer - select image rect}
  apw_ViewCopy           = apw_First+107; {To fax viewer - copy data to cboard}
  apw_ViewSetWndProc     = apw_First+108; {To fax viewer - set window procedure}
  apw_ViewSetWhitespace  = apw_First+109; {To fax viewer - set whitespace comp}
  apw_ViewGetBitmap      = apw_First+110; {To fax viewer - get memory bmp}
  apw_ViewGetNumPages    = apw_First+111; {To fax viewer - get num pages}
  apw_ViewStartUpdate    = apw_First+112; {To fax viewer - start scale update}
  apw_ViewEndUpdate      = apw_First+113; {To fax viewer - end scale upate}
  apw_ViewGotoPage       = apw_First+114; {To fax viewer - go to a page}
  apw_ViewGetCurPage     = apw_First+115; {To fax viewer - get current page #}
  apw_ViewSetDesignMode  = apw_First+116; {To fax viewer - indicate in design}
  apw_ViewSetRotation    = apw_First+117; {To fax viewer - set rotation}
  apw_ViewSetAutoScale   = apw_First+118; {To fax viewer - auto scaling}
  apw_ViewNotifyPage     = apw_First+119; {To fax viewer - notify of page chg}
  apw_ViewGetPageDim     = apw_First+120; {To fax viewer - get pg dimensions}
  apw_ViewSetLoadWholeFax= apw_First+121; {To fax viewer - set load whole fax}
  apw_ViewSetBusyCursor  = apw_First+122; {To fax viewer - set cursor for busy}
  apw_ViewerError        = apw_First+123; {Fax viewer error report}
  apw_ViewGetPageFlags   = apw_First+124; {To fax viewer - get pg flags}
  apw_ViewGetFileName    = apw_First+125; {To fax viewer - get file name}

const
  apw_TermBlinkTimeChange      = apw_First+130; {set new blink time}
  apw_TermPersistentMarkChange = apw_First+131; {set persistent blocks}
  apw_TermSetKeyEmuPtr         = apw_First+132; {set Key Emulator pointer }
  apw_TermSetKeyEmuProc        = apw_First+133; {set Key Emulator proc }
  apw_TermSetHalfDuplex        = apw_First+134; {set Duplex mode}
  apw_TermGetBuffPtr           = apw_First+135; {get a pointer to term buffer}
  apw_TermGetClientLine        = apw_First+136; {get the first client line in buffer}
  apw_TermWaitForPort          = apw_First+137; {wait for the port to open}{!!.03}

const
  apw_PrintDriverJobCreated    = apw_First+140; {printer driver created fax job}
  apw_BeginDoc                 = apw_First+141; {printer driver starts printing}
  apw_EndDoc                   = apw_First+142; {printer driver has finished printing}
  apw_AddPrim                  = apw_First+143; {internal FaxSrvx sample message}
  apw_EndPage                  = apw_First+144; {printer driver EndOfPage/idShell}
  
const
  apw_FaxCancel          = apw_First+160; {To fax - cancel the session}
  apw_FaxNextfile        = apw_First+161; {From fax - return next fax to send}
  apw_FaxStatus          = apw_First+162; {From fax - show the fax status}
  apw_FaxLog             = apw_First+163; {From fax - log the fax start/stop}
  apw_FaxName            = apw_First+164; {From fax - name the incoming fax}
  apw_FaxAccept          = apw_First+165; {From fax - accept this fax?}
  apw_FaxError           = apw_First+166; {From fax - session had error}
  apw_FaxFinish          = apw_First+167; {From fax - session finished}

const
  apw_TapiWaveMessage    = apw_First+180; {Tapi wave event message}
  apw_TapiEventMessage   = apw_First+181; {Tapi general event message}
  apw_VoIPEventMessage   = apw_First+182; {AdVoIP general event message}
  apw_VoIPNotifyMessage  = apw_First+183; {AdVoIP internal notification message}

const
  apw_StateDeactivate    = apw_First+190; {State deactivation message }
  apw_StateChange        = apw_First+191; {from State to StateMachine }

const
  apw_SapiTrain          = apw_First+192; {Sapi training requested}
  apw_SapiPhoneCallBack  = apw_First+193; {Sapi AskFor phrase return}
  apw_SapiInfoPhrase     = apw_First+194; {Sapi TAPI connection status}

const
  apw_PgrStatusEvent     = apw_First+200; {Pager status event}

const
  {Window class names}
  DispatcherClassName      = 'awDispatch';
  ProtocolClassName        = 'awProtocol';
  TerminalClassName        = 'awTerminal';
  MessageHandlerClassName  = 'awMsgHandler';
  FaxViewerClassName       = 'awViewer';
  FaxViewerClassNameDesign = 'dcViewer';
  TerminalClassNameDesign  = 'dcTerminal';
  FaxHandlerClassName      = 'awFaxHandler';

const
  {Error groups}
  egDos                  =  -0;     {DOS, DOS critical and file I/O}
  egGeneral              =  -1;     {General errors}
  egOpenComm             =  -2;     {OpenComm errors}
  egSerialIO             =  -3;     {Errors during serial I/O processing}
  egModem                =  -4;     {Errors during modem processing}
  egTrigger              =  -5;     {Error setting up triggers}
  egProtocol             =  -6;     {Errors that apply to one or more protocols}
  egINI                  =  -7;     {INI database errors}
  egFax                  =  -8;     {FAX errors}
  egAdWinsock            =   9;     {APro specific Winsock errors}
  egWinsock              =  10;     {Winsock errors}
  egWinsockEx            =  11;     {Additional Winsock errors}
  egTapi                 = -13;     {TAPI errors}

const
  { Below are all error codes used by APRO -- resource IDs are Abs(ErrorCode) }
  { The corresponding strings can be found in APW.STR.  If you are adding     }
  { strings, it's best to go there first to 'stake a claim' on an appropriate }
  { range of IDs -- since constants for some status strings are found in the  }
  { applicable component's unit instead of here...                            }

  {No error}
  ecOK                     = 0;         {Okay}

const
  {egDOS}
  ecFileNotFound           = -2;       {File not found}
  ecPathNotFound           = -3;       {Path not found}
  ecTooManyFiles           = -4;       {Too many open files}
  ecAccessDenied           = -5;       {File access denied}
  ecInvalidHandle          = -6;       {Invalid file handle}
  ecOutOfMemory            = -8;       {Insufficient memory}
  ecInvalidDrive           = -15;      {Invalid drive}
  ecNoMoreFiles            = -18;      {No more files}
  ecDiskRead               = -100;     {Attempt to read beyond end of file}
  ecDiskFull               = -101;     {Disk is full}
  ecNotAssigned            = -102;     {File not Assign-ed}
  ecNotOpen                = -103;     {File not open}
  ecNotOpenInput           = -104;     {File not open for input}
  ecNotOpenOutput          = -105;     {File not open for output}
  ecWriteProtected         = -150;     {Disk is write-protected}
  ecUnknownUnit            = -151;     {Unknown disk unit}
  ecDriveNotReady          = -152;     {Drive is not ready}
  ecUnknownCommand         = -153;     {Unknown command}
  ecCrcError               = -154;     {Data error}
  ecBadStructLen           = -155;     {Bad request structure length}
  ecSeekError              = -156;     {Seek error}
  ecUnknownMedia           = -157;     {Unknown media type}
  ecSectorNotFound         = -158;     {Disk sector not found}
  ecOutOfPaper             = -159;     {Printer is out of paper}
  ecDeviceWrite            = -160;     {Device write error}
  ecDeviceRead             = -161;     {Device read error}
  ecHardwareFailure        = -162;     {General failure}

const
  {egGeneral}
  ecBadHandle              = -1001;    {Bad handle passed to com function}
  ecBadArgument            = -1002;    {Bad argument passed to function}
  ecGotQuitMsg             = -1003;    {Yielding routine got WM_QUIT message}
  ecBufferTooBig           = -1004;    {Terminal buffer size too big}
  ecPortNotAssigned        = -1005;    {ComPort component not assigned}
  ecInternal               = -1006;    {Internal INIDB errors}
  ecModemNotAssigned       = -1007;    {Modem component not assigned}
  ecPhonebookNotAssigned   = -1008;    {Phonebook component not assgnd}
  ecCannotUseWithWinSock   = -1009;    {Component not compatible with WinSock}

const
  {egOpenComm}
  ecBadId                  = -2001;    {ie_BadId - bad or unsupported ID}
  ecBaudRate               = -2002;    {ie_Baudrate - unsupported baud rate}
  ecByteSize               = -2003;    {ie_Bytesize - invalid byte size}
  ecDefault                = -2004;    {ie_Default - error in default parameters}
  ecHardware               = -2005;    {ie_Hardware - hardware not present}
  ecMemory                 = -2006;    {ie_Memory - unable to allocate queues}
  ecCommNotOpen            = -2007;    {ie_NOpen - device not open}
  ecAlreadyOpen            = -2008;    {ie_Open - device already open}
  ecNoHandles              = -2009;    {No more handles, can't open port}
  ecNoTimers               = -2010;    {No timers available}
  ecNoPortSelected         = -2011;    {No port selected (attempt to open com0)}
  ecNotOpenedByTapi        = -2012;    {Comport was not opened by Tapi}

const
  {egSerialIO}
  ecNullApi                = -3001;    {No device layer specified}
  ecNotSupported           = -3002;    {Function not supported by driver}
  ecRegisterHandlerFailed  = -3003;    {EnableCommNotification failed}
  ecPutBlockFail           = -3004;    {Failed to put entire block}
  ecGetBlockFail           = -3005;    {Failed to get entire block}
  ecOutputBufferTooSmall   = -3006;    {Output buffer too small for block}
  ecBufferIsEmpty          = -3007;    {Buffer is empty}
  ecTracingNotEnabled      = -3008;    {Tracing not enabled}
  ecLoggingNotEnabled      = -3009;    {Logging not enabled}
  ecBaseAddressNotSet      = -3010;    {Base addr not found, RS485 mode}

const
  {Modem/Pager}
  ecModemNotStarted        = -4001;    {StartModem has not been called}
  ecModemBusy              = -4002;    {Modem is busy elsewhere}
  ecModemNotDialing        = -4003;    {Modem is not currently dialing}
  ecNotDialing             = -4004;    {TModemDialer is not dialing}
  ecAlreadyDialing         = -4005;    {TModemdialer is already dialing}
  ecModemNotResponding     = -4006;    {No response from modem}
  ecModemRejectedCommand   = -4007;    {Bad command sent to modem}
  ecModemStatusMismatch    = -4008;    {Wrong modem status requested}

  ecDeviceNotSelected      = -4009;    { Um, the modem wan't selected }
  ecModemDetectedBusy      = -4010;    { Modem detected busy signal }
  ecModemNoDialtone        = -4011;    { No dialtone detected }
  ecModemNoCarrier         = -4012;    { No carrier from modem }
  ecModemNoAnswer          = -4013;    { Modem returned No Answer response }

  { Pager }
  ecInitFail               = -4014;    { Modem initialization failure }
  ecLoginFail              = -4015;    { Login Failure }
  ecMinorSrvErr            = -4016;    { SNPP - Minor Server Error }
  ecFatalSrvErr            = -4017;    { SNPP - Fatal Server Error }

const
  {LibModem}
  ecModemNotFound          = -4020;    { Modem not found in modemcap }
  ecInvalidFile            = -4021;    { a modemcap file is invalid }

const {RAS connection status codes}
  csOpenPort               = 4500;
  csPortOpened             = 4501;
  csConnectDevice          = 4502;
  csDeviceConnected        = 4503;
  csAllDevicesConnected    = 4504;
  csAuthenticate           = 4505;
  csAuthNotify             = 4506;
  csAuthRetry              = 4507;
  csAuthCallback           = 4508;
  csAuthChangePassword     = 4509;
  csAuthProject            = 4510;
  csAuthLinkSpeed          = 4511;
  csAuthAck                = 4512;
  csReAuthenticate         = 4513;
  csAuthenticated          = 4514;
  csPrepareForCallback     = 4515;
  csWaitForModemReset      = 4516;
  csWaitForCallback        = 4517;
  csProjected              = 4518;

  csStartAuthentication    = 4519;
  csCallbackComplete       = 4520;
  csLogonNetwork           = 4521;
  csSubEntryConnected      = 4522;
  csSubEntryDisconnected   = 4523;
  csRasInteractive         = 4550;
  csRasRetryAuthentication = 4551;
  csRasCallbackSetByCaller = 4552;
  csRasPasswordExpired     = 4553;
  csRasDeviceConnected     = 4599;
  csRasBaseEnd             = csSubEntryDisconnected;
  csRasPaused              = $1000;
  csInteractive            = csRasPaused;
  csRetryAuthentication    = csRasPaused + 1;
  csCallbackSetByCaller    = csRasPaused + 2;
  csPasswordExpired        = csRasPaused + 3;
  csRasPausedEnd           = csRasPaused + 3;

  csRasConnected           = $2000;
  csRasDisconnected        = csRasConnected + 1;

  { Protocols }
  { If strings are added -- apStatusMsg needs to be changed in AWABSPCL.PAS }

const
  psOK                 = 4700;   {Protocol is ok}
  psProtocolHandshake  = 4701;   {Protocol handshaking in progress}
  psInvalidDate        = 4702;   {Bad date/time stamp received and ignored}
  psFileRejected       = 4703;   {Incoming file was rejected}
  psFileRenamed        = 4704;   {Incoming file was renamed}
  psSkipFile           = 4705;   {Incoming file was skipped}
  psFileDoesntExist    = 4706;   {Incoming file doesn't exist locally, skipped}