rfc2046.txt

< VB高级网络编程技术>>随书源代码第2章,里面有很多有用的例程,希望对大家的开发工作有帮助!

          settings may be retained across jobs and may
          potentially pose a threat to the correct operation of
          the interpreter.  The PostScript operators that set
          system and device parameters include, but may not be



Freed & Borenstein          Standards Track                    [Page 15]

RFC 2046                      Media Types                  November 1996


          limited to, the "setsystemparams" and "setdevparams"
          operators.  Message sending software should not
          generate PostScript that depends on the setting of
          system or device parameters to operate correctly.  The
          ability to set these parameters will probably be
          unavailable in secure PostScript implementations.
          Message receiving and displaying software should
          disable the ability to change system and device
          parameters.  If these operators cannot be completely
          disabled the password associated with them should at
          least be set to a hard-to-guess value.

    (4)   Some PostScript implementations provide nonstandard
          facilities for the direct loading and execution of
          machine code.  Such facilities are quite obviously open
          to substantial abuse.  Message sending software should
          not make use of such features.  Besides being totally
          hardware-specific, they are also likely to be
          unavailable in secure implementations of PostScript.
          Message receiving and displaying software should not
          allow such operators to be used if they exist.

    (5)   PostScript is an extensible language, and many, if not
          most, implementations of it provide a number of their
          own extensions.  This document does not deal with such
          extensions explicitly since they constitute an unknown
          factor.  Message sending software should not make use
          of nonstandard extensions; they are likely to be
          missing from some implementations.  Message receiving
          and displaying software should make sure that any
          nonstandard PostScript operators are secure and don't
          present any kind of threat.

    (6)   It is possible to write PostScript that consumes huge
          amounts of various system resources.  It is also
          possible to write PostScript programs that loop
          indefinitely.  Both types of programs have the
          potential to cause damage if sent to unsuspecting
          recipients.  Message-sending software should avoid the
          construction and dissemination of such programs, which
          is antisocial.  Message receiving and displaying
          software should provide appropriate mechanisms to abort
          processing after a reasonable amount of time has
          elapsed. In addition, PostScript interpreters should be
          limited to the consumption of only a reasonable amount
          of any given system resource.





Freed & Borenstein          Standards Track                    [Page 16]

RFC 2046                      Media Types                  November 1996


    (7)   It is possible to include raw binary information inside
          PostScript in various forms.  This is not recommended
          for use in Internet mail, both because it is not
          supported by all PostScript interpreters and because it
          significantly complicates the use of a MIME Content-
          Transfer-Encoding.  (Without such binary, PostScript
          may typically be viewed as line-oriented data.  The
          treatment of CRLF sequences becomes extremely
          problematic if binary and line-oriented data are mixed
          in a single Postscript data stream.)

    (8)   Finally, bugs may exist in some PostScript interpreters
          which could possibly be exploited to gain unauthorized
          access to a recipient's system.  Apart from noting this
          possibility, there is no specific action to take to
          prevent this, apart from the timely correction of such
          bugs if any are found.

4.5.3.  Other Application Subtypes

   It is expected that many other subtypes of "application" will be
   defined in the future.  MIME implementations must at a minimum treat
   any unrecognized subtypes as being equivalent to "application/octet-
   stream".

5.  Composite Media Type Values

   The remaining two of the seven initial Content-Type values refer to
   composite entities.  Composite entities are handled using MIME
   mechanisms -- a MIME processor typically handles the body directly.

5.1.  Multipart Media Type

   In the case of multipart entities, in which one or more different
   sets of data are combined in a single body, a "multipart" media type
   field must appear in the entity's header.  The body must then contain
   one or more body parts, each preceded by a boundary delimiter line,
   and the last one followed by a closing boundary delimiter line.
   After its boundary delimiter line, each body part then consists of a
   header area, a blank line, and a body area.  Thus a body part is
   similar to an RFC 822 message in syntax, but different in meaning.

   A body part is an entity and hence is NOT to be interpreted as
   actually being an RFC 822 message.  To begin with, NO header fields
   are actually required in body parts.  A body part that starts with a
   blank line, therefore, is allowed and is a body part for which all
   default values are to be assumed.  In such a case, the absence of a
   Content-Type header usually indicates that the corresponding body has



Freed & Borenstein          Standards Track                    [Page 17]

RFC 2046                      Media Types                  November 1996


   a content-type of "text/plain; charset=US-ASCII".

   The only header fields that have defined meaning for body parts are
   those the names of which begin with "Content-".  All other header
   fields may be ignored in body parts.  Although they should generally
   be retained if at all possible, they may be discarded by gateways if
   necessary.  Such other fields are permitted to appear in body parts
   but must not be depended on.  "X-" fields may be created for
   experimental or private purposes, with the recognition that the
   information they contain may be lost at some gateways.

   NOTE:  The distinction between an RFC 822 message and a body part is
   subtle, but important.  A gateway between Internet and X.400 mail,
   for example, must be able to tell the difference between a body part
   that contains an image and a body part that contains an encapsulated
   message, the body of which is a JPEG image.  In order to represent
   the latter, the body part must have "Content-Type: message/rfc822",
   and its body (after the blank line) must be the encapsulated message,
   with its own "Content-Type: image/jpeg" header field.  The use of
   similar syntax facilitates the conversion of messages to body parts,
   and vice versa, but the distinction between the two must be
   understood by implementors.  (For the special case in which parts
   actually are messages, a "digest" subtype is also defined.)

   As stated previously, each body part is preceded by a boundary
   delimiter line that contains the boundary delimiter.  The boundary
   delimiter MUST NOT appear inside any of the encapsulated parts, on a
   line by itself or as the prefix of any line.  This implies that it is
   crucial that the composing agent be able to choose and specify a
   unique boundary parameter value that does not contain the boundary
   parameter value of an enclosing multipart as a prefix.

   All present and future subtypes of the "multipart" type must use an
   identical syntax.  Subtypes may differ in their semantics, and may
   impose additional restrictions on syntax, but must conform to the
   required syntax for the "multipart" type.  This requirement ensures
   that all conformant user agents will at least be able to recognize
   and separate the parts of any multipart entity, even those of an
   unrecognized subtype.

   As stated in the definition of the Content-Transfer-Encoding field
   [RFC 2045], no encoding other than "7bit", "8bit", or "binary" is
   permitted for entities of type "multipart".  The "multipart" boundary
   delimiters and header fields are always represented as 7bit US-ASCII
   in any case (though the header fields may encode non-US-ASCII header
   text as per RFC 2047) and data within the body parts can be encoded
   on a part-by-part basis, with Content-Transfer-Encoding fields for
   each appropriate body part.



Freed & Borenstein          Standards Track                    [Page 18]

RFC 2046                      Media Types                  November 1996


5.1.1.  Common Syntax

   This section defines a common syntax for subtypes of "multipart".
   All subtypes of "multipart" must use this syntax.  A simple example
   of a multipart message also appears in this section.  An example of a
   more complex multipart message is given in RFC 2049.

   The Content-Type field for multipart entities requires one parameter,
   "boundary". The boundary delimiter line is then defined as a line
   consisting entirely of two hyphen characters ("-", decimal value 45)
   followed by the boundary parameter value from the Content-Type header
   field, optional linear whitespace, and a terminating CRLF.

   NOTE:  The hyphens are for rough compatibility with the earlier RFC
   934 method of message encapsulation, and for ease of searching for
   the boundaries in some implementations.  However, it should be noted
   that multipart messages are NOT completely compatible with RFC 934
   encapsulations; in particular, they do not obey RFC 934 quoting
   conventions for embedded lines that begin with hyphens.  This
   mechanism was chosen over the RFC 934 mechanism because the latter
   causes lines to grow with each level of quoting.  The combination of
   this growth with the fact that SMTP implementations sometimes wrap
   long lines made the RFC 934 mechanism unsuitable for use in the event
   that deeply-nested multipart structuring is ever desired.

   WARNING TO IMPLEMENTORS:  The grammar for parameters on the Content-
   type field is such that it is often necessary to enclose the boundary
   parameter values in quotes on the Content-type line.  This is not
   always necessary, but never hurts. Implementors should be sure to
   study the grammar carefully in order to avoid producing invalid
   Content-type fields.  Thus, a typical "multipart" Content-Type header
   field might look like this:

     Content-Type: multipart/mixed; boundary=gc0p4Jq0M2Yt08j34c0p

   But the following is not valid:

     Content-Type: multipart/mixed; boundary=gc0pJq0M:08jU534c0p

   (because of the colon) and must instead be represented as

     Content-Type: multipart/mixed; boundary="gc0pJq0M:08jU534c0p"

   This Content-Type value indicates that the content consists of one or
   more parts, each with a structure that is syntactically identical to
   an RFC 822 message, except that the header area is allowed to be
   completely empty, and that the parts are each preceded by the line




Freed & Borenstein          Standards Track                    [Page 19]

RFC 2046                      Media Types                  November 1996


     --gc0pJq0M:08jU534c0p

   The boundary delimiter MUST occur at the beginning of a line, i.e.,
   following a CRLF, and the initial CRLF is considered to be attached
   to the boundary delimiter line rather than part of the preceding
   part.  The boundary may be followed by zero or more characters of
   linear whitespace. It is then terminated by either another CRLF and
   the header fields for the next part, or by two CRLFs, in which case
   there are no header fields for the next part.  If no Content-Type
   field is present it is assumed to be "message/rfc822" in a
   "multipart/digest" and "text/plain" otherwise.

   NOTE:  The CRLF preceding the boundary delimiter line is conceptually
   attached to the boundary so that it is possible to have a part that
   does not end with a CRLF (line  break).  Body parts that must be
   considered to end with line breaks, therefore, must have two CRLFs
   preceding the boundary delimiter line, the first of which is part of
   the preceding body part, and the second of which is part of the
   encapsulation boundary.

   Boundary delimiters must not appear within the encapsulated material,
   and must be no longer than 70 characters, not counting the two
   leading hyphens.

   The boundary delimiter line following the last body part is a
   distinguished delimiter that indicates that no further body parts
   will follow.  Such a delimiter line is identical to the previous
   delimiter lines, with the addition of two more hyphens after the
   boundary parameter value.

     --gc0pJq0M:08jU534c0p--

   NOTE TO IMPLEMENTORS:  Boundary string comparisons must compare the
   boundary value with the beginning of each candidate line.  An exact
   match of the entire candidate line is not required; it is sufficient
   that the boundary appear in its entirety following the CRLF.

   There appears to be room for additional information prior to the
   first boundary delimiter line and following the final boundary
   delimiter line.  These areas should generally be left blank, and
   implementations must ignore anything that appears before the first
   boundary delimiter line or after the last one.