7032_can.fit

CAN总线资料

-- MAX+plus II Compiler Fit File      
-- Version 10.2 07/10/2002            
-- Compiled: 06/10/2005 16:49:51      

-- Copyright (C) 1988-2002 Altera Corporation
-- Any megafunction design, and related net list (encrypted or decrypted),
-- support information, device programming or simulation file, and any other
-- associated documentation or information provided by Altera or a partner
-- under Altera's Megafunction Partnership Program may be used only to
-- program PLD devices (but not masked PLD devices) from Altera.  Any other
-- use of such megafunction design, net list, support information, device
-- programming or simulation file, or any other related documentation or
-- information is prohibited for any other purpose, including, but not
-- limited to modification, reverse engineering, de-compiling, or use with
-- any other silicon devices, unless such use is explicitly licensed under
-- a separate agreement with Altera or a megafunction partner.  Title to
-- the intellectual property, including patents, copyrights, trademarks,
-- trade secrets, or maskworks, embodied in any such megafunction design,
-- net list, support information, device programming or simulation file, or
-- any other related documentation or information provided by Altera or a
-- megafunction partner, remains with Altera, the megafunction partner, or
-- their respective licensors.  No other licenses, including any licenses
-- needed under any third party's intellectual property, are provided herein.

CHIP "7032_can"
BEGIN

    DEVICE = "EPM7032AETC44-10";

    "ADDR24"                       : INPUT_PIN  = 44     ; -- LC3
    "ATABUSY"                      : INPUT_PIN  = 37     ;
    "A0"                           : INPUT_PIN  = 20     ; -- LC30
    "A1"                           : INPUT_PIN  = 21     ; -- LC29
    "A2"                           : INPUT_PIN  = 22     ; -- LC28
    "A15"                          : INPUT_PIN  = 10     ; -- LC11
    "A24"                          : INPUT_PIN  = 8      ; -- LC10
    "D2"                           : INPUT_PIN  = 31     ; -- LC21
    "D3"                           : INPUT_PIN  = 33     ; -- LC19
    "EINT0"                        : INPUT_PIN  = 11     ; -- LC12
    "nGCS0"                        : INPUT_PIN  = 43     ; -- LC2
    "nGCS1"                        : INPUT_PIN  = 42     ; -- LC1
    "nGCS2"                        : INPUT_PIN  = 2      ; -- LC5
    "nGCS3"                        : INPUT_PIN  = 3      ; -- LC6
    "nGCS4"                        : INPUT_PIN  = 5      ; -- LC7
    "nOE"                          : INPUT_PIN  = 12     ; -- LC13
    "NRST"                         : INPUT_PIN  = 39     ;
    "nWE"                          : INPUT_PIN  = 13     ; -- LC14
    "CANALE"                       : OUTPUT_PIN = 28     ; -- LC23
    "CANCS0"                       : OUTPUT_PIN = 34     ; -- LC18
    "CANRD"                        : OUTPUT_PIN = 35     ; -- LC17
    "CANWR"                        : OUTPUT_PIN = 30     ; -- LC22
    "DIR1"                         : OUTPUT_PIN = 15     ; -- LC16
    "nEXTBUS"                      : OUTPUT_PIN = 14     ; -- LC15
    "nIOR_P"                       : OUTPUT_PIN = 25     ; -- LC26
    "nIOW_p"                       : OUTPUT_PIN = 23     ; -- LC27
    "nMEMR_P"                      : OUTPUT_PIN = 19     ; -- LC31
    "nMEMW_P"                      : OUTPUT_PIN = 18     ; -- LC32
    "RST"                          : OUTPUT_PIN = 27     ; -- LC24
    "USBCON"                       : OUTPUT_PIN = 6      ; -- LC8

END;

INTERNAL_INFO "7032_can"
BEGIN
	DEVICE = EPM7032AETC44-10;
	LC15    : LORAX = "G53R0";
	LC23    : LORAX = "G32R0";
	LC17    : LORAX = "G13R0";
	LC22    : LORAX = "G31R0";
	LC18    : LORAX = "G14R0";
	LC32    : LORAX = "G58R0";
	LC31    : LORAX = "G57R0";
	LC8     : LORAX = "G29R0";
	LC24    : LORAX = "G33R0";
	LC27    : LORAX = "G40R0";
	LC26    : LORAX = "G39R0";
	LC16    : LORAX = "G54R0";
	OH6R0P5 : LORAX = "G62R0,PA31R0C0";
	OH0R0P42 : LORAX = "G43R0,PA20R0C0,PA20R0C1";
	OH1R0P43 : LORAX = "G44R0,PA19R0C0";
	OH4R0P2 : LORAX = "G60R0,PA29R0C0";
	OH5R0P3 : LORAX = "G61R0,PA30R0C0,PA30R0C1";
	OH13R0P13 : LORAX = "G18R0,PA13R0C1";
	OH27R0P22 : LORAX = "G7R0,PA2R0C1";
	OH28R0P21 : LORAX = "G21R0,PA11R0C1";
	OH29R0P20 : LORAX = "G22R0,PA16R0C1";
	OH12R0P12 : LORAX = "G17R0,PA15R0C0,PA15R0C1";
	OH2R0P44 : LORAX = "G45R0,PA22R0C1";
	OH34R0P39 : LORAX = "G25R0,PA17R0C0,PA17R0C1";
END;