uarttest.mak

blackfin的UART例程

# Generated by the VisualDSP++ IDDE

# Note:  Any changes made to this Makefile will be lost the next time the
# matching project file is loaded into the IDDE.  If you wish to preserve
# changes, rename this file and run it externally to the IDDE.

# The syntax of this Makefile is such that GNU Make v3.77 or higher is
# required.

# The current working directory should be the directory in which this
# Makefile resides.

# Supported targets:
#     UARTTest_Debug
#     UARTTest_Debug_clean

# Define this variable if you wish to run this Makefile on a host
# other than the host that created it and VisualDSP++ may be installed
# in a different directory.

ADI_DSP=C:\Program Files\Analog Devices\VisualDSP 4.5


# $VDSP is a gmake-friendly version of ADI_DIR

empty:=
space:= $(empty) $(empty)
VDSP_INTERMEDIATE=$(subst \,/,$(ADI_DSP))
VDSP=$(subst $(space),\$(space),$(VDSP_INTERMEDIATE))

RM=cmd /C del /F /Q

#
# Begin "UARTTest_Debug" configuration
#

ifeq ($(MAKECMDGOALS),UARTTest_Debug)

UARTTest_Debug : ./Debug/UARTTest.dxe 

./Debug/UART.doj :UART.c $(VDSP)/Blackfin/include/services/services.h $(VDSP)/Blackfin/include/sys/exception.h $(VDSP)/Blackfin/include/stddef.h $(VDSP)/Blackfin/include/yvals.h $(VDSP)/Blackfin/include/cdefBF532.h $(VDSP)/Blackfin/include/defBF532.h $(VDSP)/Blackfin/include/def_LPBlackfin.h $(VDSP)/Blackfin/include/cdef_LPBlackfin.h $(VDSP)/Blackfin/include/ccblkfn.h $(VDSP)/Blackfin/include/stdlib.h $(VDSP)/Blackfin/include/stdlib_bf.h $(VDSP)/Blackfin/include/services/int/adi_int.h $(VDSP)/Blackfin/include/services/dcb/adi_dcb.h $(VDSP)/Blackfin/include/services/dma/adi_dma.h $(VDSP)/Blackfin/include/services/ebiu/adi_ebiu.h $(VDSP)/Blackfin/include/services/pwr/adi_pwr.h $(VDSP)/Blackfin/include/services/tmr/adi_tmr.h $(VDSP)/Blackfin/include/services/rtc/adi_rtc.h $(VDSP)/Blackfin/include/time.h $(VDSP)/Blackfin/include/xcycle_count.h $(VDSP)/Blackfin/include/limits.h $(VDSP)/Blackfin/include/cycle_count_bf.h $(VDSP)/Blackfin/include/services/flag/adi_flag.h $(VDSP)/Blackfin/include/drivers/adi_dev.h $(VDSP)/Blackfin/include/drivers/uart/adi_uart.h 
	@echo ".\UART.c"
	$(VDSP)/ccblkfn.exe -c .\UART.c -file-attr ProjectName=UARTTest -g -structs-do-not-overlap -no-multiline -double-size-32 -decls-strong -warn-protos -si-revision 0.2 -proc ADSP-BF533 -o .\Debug\UART.doj -MM

./Debug/UARTTest.dxe :$(VDSP)/Blackfin/ldf/ADSP-BF533.ldf $(VDSP)/Blackfin/lib/bf532_rev_0.2/crtsf532y.doj ./Debug/UART.doj $(VDSP)/Blackfin/lib/bf532_rev_0.2/__initsbsz532.doj $(VDSP)/Blackfin/lib/cplbtab533.doj $(VDSP)/Blackfin/lib/bf532_rev_0.2/crtn532y.doj $(VDSP)/Blackfin/lib/bf532_rev_0.2/libsmall532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libio532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libc532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/librt_fileio532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libevent532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libcpp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libcpprt532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libx532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libf64ieee532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libdsp532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libsftflt532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libetsi532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/Debug/libssl532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/Debug/libdrv532y.dlb $(VDSP)/Blackfin/lib/bf532_rev_0.2/libprofile532y.dlb 
	@echo "Linking..."
	$(VDSP)/ccblkfn.exe .\Debug\UART.doj -L .\Debug -add-debug-libpaths -flags-link -od,.\Debug -o .\Debug\UARTTest.dxe -proc ADSP-BF533 -si-revision 0.2 -MM

endif

ifeq ($(MAKECMDGOALS),UARTTest_Debug_clean)

UARTTest_Debug_clean:
	-$(RM) ".\Debug\UART.doj"
	-$(RM) ".\Debug\UARTTest.dxe"
	-$(RM) ".\Debug\*.ipa"
	-$(RM) ".\Debug\*.opa"
	-$(RM) ".\Debug\*.ti"
	-$(RM) ".\*.rbld"

endif