makefile

bash debugger. You can use this tool to debug bash shell script

# Makefile.in generated by automake 1.10 from Makefile.am.
# emacs/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#   Copyright (C) 2002, 2003, 2006 Rocky Bernstein [e-mail]
#
#   Bash is free software; you can redistribute it and/or modify it under
#   the terms of the GNU General Public License as published by the Free
#   Software Foundation; either version 2, or (at your option) any later
#   version.
#
#   Bash is distributed in the hope that it will be useful, but WITHOUT ANY
#   WARRANTY; without even the implied warranty of MERCHANTABILITY or
#   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
#   for more details.
#   
#   You should have received a copy of the GNU General Public License along
#   with Bash; see the file COPYING.  If not, write to the Free Software
#   Foundation, 59 Temple Place, Suite 330, Boston, MA 02111 USA.
#$Id: Makefile.am,v 1.6 2007/07/12 08:37:36 myamato Exp $


pkgdatadir = $(datadir)/bashdb
pkglibdir = $(libdir)/bashdb
pkgincludedir = $(includedir)/bashdb
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-cygwin
host_triplet = i686-pc-cygwin
subdir = emacs
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(srcdir)/bashdb-test.el.in
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES = bashdb-test.el
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(lispdir)"
lispLISP_INSTALL = $(INSTALL_DATA)
LISP = $(lisp_LISP)
am__ELFILES = bashdb.el
am__ELCFILES = $(am__ELFILES:.el=.elc)
elisp_comp = $(top_srcdir)/elisp-comp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run aclocal-1.10
ALT_PACKAGE_NAME = bashdb
AMTAR = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run tar
AR = ar
AUTOCONF = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run autoconf
AUTOHEADER = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run autoheader
AUTOMAKE = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run automake-1.10
AWK = gawk
BASHDB_MAIN = /usr/share/bashdb/bashdb-main.inc
BASHVERS = 3.1
BASH_PROG = /usr/bin/bash
BASH_SRC = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CPP = gcc -E
CPPFLAGS = 
CVS2CL = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run cvs2cl
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -g -O2
CYGPATH_W = cygpath -w
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DIFF = /usr/bin/diff
DIFF_OPTS =  -w --unified
ECHO = echo
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
EMACS = /usr/bin/emacs
EMACSLOADPATH = 
EXEEXT = .exe
F77 = g77
FFLAGS = -g -O2
GREP = /usr/bin/grep
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INTERPRETER_NAME = /usr/local/bin/bash
LDFLAGS = 
LIBOBJS = 
LIBS = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKEINFO = ${SHELL} /cygdrive/d/chengong/code/bashdb-3.1-0.09/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
OBJEXT = o
PACKAGE = bashdb
PACKAGE_BUGREPORT = [e-mail]
PACKAGE_NAME = bashdb
PACKAGE_STRING = bashdb 3.1-0.09
PACKAGE_TARNAME = bashdb
PACKAGE_VERSION = 3.1-0.09
PATH_SEPARATOR = :
PIC =  -DDLL_EXPORT -DPIC
PKGDATADIR = ${prefix}/share/bashdb
RANLIB = ranlib
RELSTATUS = 0.09
RM = /usr/bin/rm
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TRY_GETOPT = 1
VERSION = 3.1-0.09
WL = -Wl,
abs_builddir = /cygdrive/d/chengong/code/bashdb-3.1-0.09/emacs
abs_srcdir = /cygdrive/d/chengong/code/bashdb-3.1-0.09/emacs
abs_top_builddir = /cygdrive/d/chengong/code/bashdb-3.1-0.09
abs_top_srcdir = /cygdrive/d/chengong/code/bashdb-3.1-0.09
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_F77 = g77
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i686-pc-cygwin
build_alias = 
build_cpu = i686
build_os = cygwin
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
host = i686-pc-cygwin
host_alias = 
host_cpu = i686
host_os = cygwin
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /cygdrive/d/chengong/code/bashdb-3.1-0.09/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
lispdir = ${datarootdir}/emacs/site-lisp
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
sysconfdir = ${prefix}/etc
target_alias = 
top_builddir = ..
top_srcdir = ..
check_DATA = bashdb-test.el bashdb-test.el.in elk-test.el
EXTRA_DIST = bashdb.el $(check_DATA)
ELCFILES = bashdb.elc
lisp_LISP = bashdb.el
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  emacs/Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --gnu  emacs/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
bashdb-test.el: $(top_builddir)/config.status $(srcdir)/bashdb-test.el.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

elc-stamp: $(LISP)
	@echo 'WARNING: Warnings can be ignored. :-)'
	@rm -f elc-temp && touch elc-temp
	if test "$(EMACS)" != no; then \
	  set x; \
	  list='$(LISP)'; for p in $$list; do \
	    if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	    set x "$$@" "$$d$$p"; shift; \
	  done; \
	  shift; \
	  EMACS="$(EMACS)" $(SHELL) $(elisp_comp) "$$@" || exit 1; \
	else : ; fi
	@mv -f elc-temp $@
$(am__ELCFILES): elc-stamp
	@if test "$(EMACS)" != no && test ! -f $@; then \
	  trap 'rm -rf elc-lock elc-stamp' 1 2 13 15; \
	  if mkdir elc-lock 2>/dev/null; then \
	    rm -f elc-stamp; \
	    $(MAKE) $(AM_MAKEFLAGS) elc-stamp; \
	    rmdir elc-lock; \
	  else \
	    while test -d elc-lock; do sleep 1; done; \
	    test -f elc-stamp; exit $$?; \
	  fi; \
	else : ; fi
install-lispLISP: $(lisp_LISP) $(ELCFILES)
	@$(NORMAL_INSTALL)
	@if test "$(EMACS)" != no; then \
	  test -z "$(lispdir)" || $(MKDIR_P) "$(DESTDIR)$(lispdir)"; \
	  list='$(lisp_LISP)'; for p in $$list; do \
	    if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	    f=$(am__strip_dir) \
	    echo " $(lispLISP_INSTALL) '$$d$$p' '$(DESTDIR)$(lispdir)/$$f'"; \
	    $(lispLISP_INSTALL) "$$d$$p" "$(DESTDIR)$(lispdir)/$$f"; \
	    if test -f $${p}c; then \
	      echo " $(lispLISP_INSTALL) '$${p}c' '$(DESTDIR)$(lispdir)/$${f}c'"; \
	      $(lispLISP_INSTALL) "$${p}c" "$(DESTDIR)$(lispdir)/$${f}c"; \
	    else : ; fi; \
	  done; \
	else : ; fi

uninstall-lispLISP:
	@$(NORMAL_UNINSTALL)
	@if test "$(EMACS)" != no; then \
	  list='$(lisp_LISP)'; for p in $$list; do \
	    f=$(am__strip_dir) \
	    echo " rm -f '$(DESTDIR)$(lispdir)/$$f' '$(DESTDIR)$(lispdir)/$${f}c'"; \
	    rm -f "$(DESTDIR)$(lispdir)/$$f" "$(DESTDIR)$(lispdir)/$${f}c"; \
	  done; \
	else : ; fi

clean-lisp:
	-rm -f elc-stamp $(ELCFILES)
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) $(check_DATA)
check: check-am
all-am: Makefile $(LISP) $(ELCFILES)
installdirs:
	for dir in "$(DESTDIR)$(lispdir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool clean-lisp mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

info: info-am

info-am:

install-data-am: install-lispLISP

install-dvi: install-dvi-am

install-exec-am:

install-html: install-html-am

install-info: install-info-am

install-man:

install-pdf: install-pdf-am

install-ps: install-ps-am

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am: uninstall-lispLISP

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	clean-lisp distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-lispLISP \
	install-man install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-generic \
	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
	ps ps-am uninstall uninstall-am uninstall-lispLISP


test: check

check:
	$(EMACS) -batch -q -l $(top_builddir)/emacs/bashdb-test.el $(srcdir)/elk-test.el
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: