makefile

bash debugger. You can use this tool to debug bash shell script

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f $(distdir)/$$relfile || \
		cp -p $$file $(distdir)/$$relfile; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf bashdb.aux bashdb.cp bashdb.cps bashdb.fn bashdb.fns bashdb.ky \
	  bashdb.kys bashdb.log bashdb.pg bashdb.pgs bashdb.tmp \
	  bashdb.toc bashdb.tp bashdb.tps bashdb.vr bashdb.vrs \
	  bashdb.dvi bashdb.pdf bashdb.ps bashdb.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man1_MANS) $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
	  else file=$$i; fi; \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst"; \
	done
uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list='$(man1_MANS) $(dist_man1_MANS) $(nodist_man1_MANS)'; \
	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
	for i in $$l2; do \
	  case "$$i" in \
	    *.1*) list="$$list $$i" ;; \
	  esac; \
	done; \
	for i in $$list; do \
	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
	  case "$$ext" in \
	    1*) ;; \
	    *) ext='1' ;; \
	  esac; \
	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
	  echo " rm -f '$(DESTDIR)$(man1dir)/$$inst'"; \
	  rm -f "$(DESTDIR)$(man1dir)/$$inst"; \
	done
tags: TAGS
TAGS:

ctags: CTAGS
CTAGS:


distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) \
	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
	  dist-info
check-am: all-am
check: check-am
all-am: Makefile $(INFO_DEPS) $(MANS)
installdirs:
	for dir in "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
	-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am: $(DVIS)

html-am: $(HTMLS)

info: info-am

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-dvi: install-dvi-am

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(dvidir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(dvidir)/$$f"; \
	done
install-exec-am:

install-html: install-html-am

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f"; \
	  else \
	    echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(htmldir)/$$f"; \
	  fi; \
	done
install-info: install-info-am

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
                       $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      relfile=`echo "$$ifile" | sed 's|^.*/||'`; \
	      echo " $(INSTALL_DATA) '$$ifile' '$(DESTDIR)$(infodir)/$$relfile'"; \
	      $(INSTALL_DATA) "$$ifile" "$(DESTDIR)$(infodir)/$$relfile"; \
	    else : ; fi; \
	  done; \
	done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

install-pdf: install-pdf-am

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(pdfdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(pdfdir)/$$f"; \
	done
install-ps: install-ps-am

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(INSTALL_DATA) '$$d$$p' '$(DESTDIR)$(psdir)/$$f'"; \
	  $(INSTALL_DATA) "$$d$$p" "$(DESTDIR)$(psdir)/$$f"; \
	done
installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-aminfo mostlyclean-generic \
	mostlyclean-libtool mostlyclean-vti

pdf: pdf-am

pdf-am: $(PDFS)

ps: ps-am

ps-am: $(PSS)

uninstall-am: uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-pdf-am uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: install-am install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	dist-info distclean distclean-generic distclean-libtool \
	distdir dvi dvi-am html html-am info info-am install \
	install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-man1 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs maintainer-clean maintainer-clean-aminfo \
	maintainer-clean-generic maintainer-clean-vti mostlyclean \
	mostlyclean-aminfo mostlyclean-generic mostlyclean-libtool \
	mostlyclean-vti pdf pdf-am ps ps-am uninstall uninstall-am \
	uninstall-dvi-am uninstall-html-am uninstall-info-am \
	uninstall-man uninstall-man1 uninstall-pdf-am uninstall-ps-am


all: $(INFO_DEPS) $(man1_MANS) html 

man: $(man1_MANS)

html: bashdb.html bashdb-man.html

bashdb.html: bashdb.texi
	texi2html $(srcdir)/bashdb.texi || true

bashdb-man.html: bashdb-man.pod
	pod2html --infile=$(srcdir)/bashdb-man.pod --outfile=$@

$(man1_MANS): bashdb-man.pod
	pod2man --release=$(PACKAGE_VERSION) --center="GNU Tools" --section=$(EXT) $(srcdir)/bashdb-man.pod >$@

%.ps.gz: %.ps
	gzip -9c $< > $@

.texi.pdf:
	$(TEXI2PDF) -I $(srcdir) $<

.texi.dvi:
	$(TEXI2DVI) -I $(srcdir) $<

.dvi.ps:
	test -d $(docdir) || mkdir $(docdir)
	$(DVIPS) $< -o $@

.texi.html:
	texi2html $< || true

.texi.txt:
	makeinfo --no-headers $< > $@

all-formats: pdf dvi txt ps html
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: