📄 2.6.16-at91.patch
字号:
diff -urN linux-2.6.16.orig/arch/arm/Kconfig linux-2.6.16/arch/arm/Kconfig--- linux-2.6.16.orig/arch/arm/Kconfig Mon Mar 20 11:16:40 2006+++ linux-2.6.16/arch/arm/Kconfig Mon Mar 20 15:46:02 2006@@ -240,11 +240,11 @@ help This enables support for systems based on the Agilent AAEC-2000 -config ARCH_AT91RM9200- bool "AT91RM9200"+config ARCH_AT91+ bool "AT91" help- Say Y here if you intend to run this kernel on an Atmel- AT91RM9200-based board.+ Say Y here if you intend to run this kernel on an Atmel AT91+ System-on-Chip board. endchoice diff -urN linux-2.6.16.orig/arch/arm/Makefile linux-2.6.16/arch/arm/Makefile--- linux-2.6.16.orig/arch/arm/Makefile Mon Mar 20 11:16:40 2006+++ linux-2.6.16/arch/arm/Makefile Mon Mar 20 15:46:02 2006@@ -105,6 +105,7 @@ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000 machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200+ machine-$(CONFIG_ARCH_AT91SAM9261):= at91rm9200 ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line.diff -urN linux-2.6.16.orig/arch/arm/boot/compressed/head-at91rm9200.S linux-2.6.16/arch/arm/boot/compressed/head-at91rm9200.S--- linux-2.6.16.orig/arch/arm/boot/compressed/head-at91rm9200.S Mon Mar 20 11:16:40 2006+++ linux-2.6.16/arch/arm/boot/compressed/head-at91rm9200.S Mon Mar 20 15:46:02 2006@@ -49,6 +49,18 @@ cmp r7, r3 beq 99f + @ Embest ATEB9200 : 923+ mov r3, #(MACH_TYPE_ATEB9200 & 0xff)+ orr r3, r3, #(MACH_TYPE_ATEB9200 & 0xff00)+ cmp r7, r3+ beq 99f++ @ Sperry-Sun KAFA : 662+ mov r3, #(MACH_TYPE_KAFA & 0xff)+ orr r3, r3, #(MACH_TYPE_KAFA & 0xff00)+ cmp r7, r3+ beq 99f+ @ Unknown board, use the AT91RM9200DK board @ mov r7, #MACH_TYPE_AT91RM9200 mov r7, #(MACH_TYPE_AT91RM9200DK & 0xff)diff -urN linux-2.6.16.orig/arch/arm/configs/at91rm9200dk_defconfig linux-2.6.16/arch/arm/configs/at91rm9200dk_defconfig--- linux-2.6.16.orig/arch/arm/configs/at91rm9200dk_defconfig Mon Mar 20 11:16:40 2006+++ linux-2.6.16/arch/arm/configs/at91rm9200dk_defconfig Mon Mar 20 15:46:03 2006@@ -103,6 +103,7 @@ # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set+CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91RM9200=y #@@ -379,7 +380,7 @@ # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_AT91_DATAFLASH=y-CONFIG_MTD_AT91_DATAFLASH_CARD=y+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # # NAND Flash Device Driversdiff -urN linux-2.6.16.orig/arch/arm/configs/at91rm9200ek_defconfig linux-2.6.16/arch/arm/configs/at91rm9200ek_defconfig--- linux-2.6.16.orig/arch/arm/configs/at91rm9200ek_defconfig Mon Mar 20 11:16:40 2006+++ linux-2.6.16/arch/arm/configs/at91rm9200ek_defconfig Mon Mar 20 15:46:03 2006@@ -103,6 +103,7 @@ # CONFIG_ARCH_IMX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_AAEC2000 is not set+CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91RM9200=y #@@ -370,7 +371,7 @@ # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_AT91_DATAFLASH=y-CONFIG_MTD_AT91_DATAFLASH_CARD=y+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set # # NAND Flash Device Driversdiff -urN linux-2.6.16.orig/arch/arm/configs/ateb9200_defconfig linux-2.6.16/arch/arm/configs/ateb9200_defconfig--- linux-2.6.16.orig/arch/arm/configs/ateb9200_defconfig Thu Jan 1 02:00:00 1970+++ linux-2.6.16/arch/arm/configs/ateb9200_defconfig Mon Mar 20 15:46:03 2006@@ -0,0 +1,1217 @@+#+# Automatically generated make config: don't edit+# Linux kernel version: 2.6.14.4+# Wed Dec 28 21:10:50 2005+#+CONFIG_ARM=y+CONFIG_MMU=y+CONFIG_UID16=y+CONFIG_RWSEM_GENERIC_SPINLOCK=y+CONFIG_GENERIC_CALIBRATE_DELAY=y++#+# Code maturity level options+#+CONFIG_EXPERIMENTAL=y+CONFIG_CLEAN_COMPILE=y+CONFIG_BROKEN_ON_SMP=y+CONFIG_LOCK_KERNEL=y+CONFIG_INIT_ENV_ARG_LIMIT=32++#+# General setup+#+CONFIG_LOCALVERSION=""+CONFIG_LOCALVERSION_AUTO=y+CONFIG_SWAP=y+CONFIG_SYSVIPC=y+# CONFIG_POSIX_MQUEUE is not set+# CONFIG_BSD_PROCESS_ACCT is not set+CONFIG_SYSCTL=y+# CONFIG_AUDIT is not set+CONFIG_HOTPLUG=y+CONFIG_KOBJECT_UEVENT=y+# CONFIG_IKCONFIG is not set+CONFIG_INITRAMFS_SOURCE=""+CONFIG_EMBEDDED=y+CONFIG_KALLSYMS=y+# CONFIG_KALLSYMS_EXTRA_PASS is not set+CONFIG_PRINTK=y+CONFIG_BUG=y+CONFIG_BASE_FULL=y+CONFIG_FUTEX=y+CONFIG_EPOLL=y+CONFIG_CC_OPTIMIZE_FOR_SIZE=y+CONFIG_SHMEM=y+CONFIG_CC_ALIGN_FUNCTIONS=0+CONFIG_CC_ALIGN_LABELS=0+CONFIG_CC_ALIGN_LOOPS=0+CONFIG_CC_ALIGN_JUMPS=0+# CONFIG_TINY_SHMEM is not set+CONFIG_BASE_SMALL=0++#+# Loadable module support+#+CONFIG_MODULES=y+CONFIG_MODULE_UNLOAD=y+# CONFIG_MODULE_FORCE_UNLOAD is not set+CONFIG_OBSOLETE_MODPARM=y+# CONFIG_MODVERSIONS is not set+# CONFIG_MODULE_SRCVERSION_ALL is not set+CONFIG_KMOD=y++#+# System Type+#+# CONFIG_ARCH_CLPS7500 is not set+# CONFIG_ARCH_CLPS711X is not set+# CONFIG_ARCH_CO285 is not set+# CONFIG_ARCH_EBSA110 is not set+# CONFIG_ARCH_FOOTBRIDGE is not set+# CONFIG_ARCH_INTEGRATOR is not set+# CONFIG_ARCH_IOP3XX is not set+# CONFIG_ARCH_IXP4XX is not set+# CONFIG_ARCH_IXP2000 is not set+# CONFIG_ARCH_L7200 is not set+# CONFIG_ARCH_PXA is not set+# CONFIG_ARCH_RPC is not set+# CONFIG_ARCH_SA1100 is not set+# CONFIG_ARCH_S3C2410 is not set+# CONFIG_ARCH_SHARK is not set+# CONFIG_ARCH_LH7A40X is not set+# CONFIG_ARCH_OMAP is not set+# CONFIG_ARCH_VERSATILE is not set+# CONFIG_ARCH_IMX is not set+# CONFIG_ARCH_H720X is not set+# CONFIG_ARCH_AAEC2000 is not set+CONFIG_ARCH_AT91=y+CONFIG_ARCH_AT91RM9200=y++#+# AT91RM9200 Implementations+#++#+# AT91RM9200 Board Type+#+# CONFIG_ARCH_AT91RM9200DK is not set+# CONFIG_MACH_AT91RM9200EK is not set+# CONFIG_MACH_CSB337 is not set+# CONFIG_MACH_CSB637 is not set+# CONFIG_MACH_CARMEVA is not set+# CONFIG_MACH_KB9200 is not set+CONFIG_MACH_ATEB9200=y++#+# AT91RM9200 Feature Selections+#+# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set++#+# Processor Type+#+CONFIG_CPU_32=y+CONFIG_CPU_ARM920T=y+CONFIG_CPU_32v4=y+CONFIG_CPU_ABRT_EV4T=y+CONFIG_CPU_CACHE_V4WT=y+CONFIG_CPU_CACHE_VIVT=y+CONFIG_CPU_COPY_V4WB=y+CONFIG_CPU_TLB_V4WBI=y++#+# Processor Features+#+CONFIG_ARM_THUMB=y+# CONFIG_CPU_ICACHE_DISABLE is not set+# CONFIG_CPU_DCACHE_DISABLE is not set+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set++#+# Bus support+#+CONFIG_ISA_DMA_API=y++#+# PCCARD (PCMCIA/CardBus) support+#+CONFIG_PCCARD=m+# CONFIG_PCMCIA_DEBUG is not set+CONFIG_PCMCIA=m+CONFIG_PCMCIA_LOAD_CIS=y+CONFIG_PCMCIA_IOCTL=y++#+# PC-card bridges+#+CONFIG_AT91_CF=m++#+# Kernel Features+#+CONFIG_PREEMPT=y+CONFIG_NO_IDLE_HZ=y+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set+CONFIG_SELECT_MEMORY_MODEL=y+CONFIG_FLATMEM_MANUAL=y+# CONFIG_DISCONTIGMEM_MANUAL is not set+# CONFIG_SPARSEMEM_MANUAL is not set+CONFIG_FLATMEM=y+CONFIG_FLAT_NODE_MEM_MAP=y+# CONFIG_SPARSEMEM_STATIC is not set+# CONFIG_LEDS is not set+CONFIG_ALIGNMENT_TRAP=y++#+# Boot options+#+CONFIG_ZBOOT_ROM_TEXT=0x0+CONFIG_ZBOOT_ROM_BSS=0x0+CONFIG_CMDLINE=""+# CONFIG_XIP_KERNEL is not set++#+# Floating point emulation+#++#+# At least one emulation must be selected+#+CONFIG_FPE_NWFPE=y+# CONFIG_FPE_NWFPE_XP is not set+# CONFIG_FPE_FASTFPE is not set++#+# Userspace binary formats+#+CONFIG_BINFMT_ELF=y+# CONFIG_BINFMT_AOUT is not set+# CONFIG_BINFMT_MISC is not set+# CONFIG_ARTHUR is not set++#+# Power management options+#+CONFIG_PM=y+# CONFIG_APM is not set++#+# Networking+#+CONFIG_NET=y++#+# Networking options+#+CONFIG_PACKET=y+# CONFIG_PACKET_MMAP is not set+CONFIG_UNIX=y+CONFIG_XFRM=y+# CONFIG_XFRM_USER is not set+CONFIG_NET_KEY=y+CONFIG_INET=y+# CONFIG_IP_MULTICAST is not set+# CONFIG_IP_ADVANCED_ROUTER is not set+CONFIG_IP_FIB_HASH=y+# CONFIG_IP_PNP is not set+# CONFIG_NET_IPIP is not set+# CONFIG_NET_IPGRE is not set+# CONFIG_ARPD is not set+# CONFIG_SYN_COOKIES is not set+# CONFIG_INET_AH is not set+# CONFIG_INET_ESP is not set+# CONFIG_INET_IPCOMP is not set+# CONFIG_INET_TUNNEL is not set+CONFIG_INET_DIAG=y+CONFIG_INET_TCP_DIAG=y+# CONFIG_TCP_CONG_ADVANCED is not set+CONFIG_TCP_CONG_BIC=y+# CONFIG_IPV6 is not set+# CONFIG_NETFILTER is not set++#+# DCCP Configuration (EXPERIMENTAL)+#+# CONFIG_IP_DCCP is not set++#+# SCTP Configuration (EXPERIMENTAL)+#+# CONFIG_IP_SCTP is not set+# CONFIG_ATM is not set+CONFIG_BRIDGE=m+CONFIG_VLAN_8021Q=m+# CONFIG_DECNET is not set+# CONFIG_LLC2 is not set+# CONFIG_IPX is not set+# CONFIG_ATALK is not set+# CONFIG_X25 is not set+# CONFIG_LAPB is not set+# CONFIG_NET_DIVERT is not set+# CONFIG_ECONET is not set+# CONFIG_WAN_ROUTER is not set+# CONFIG_NET_SCHED is not set+# CONFIG_NET_CLS_ROUTE is not set++#+# Network testing+#+# CONFIG_NET_PKTGEN is not set+# CONFIG_HAMRADIO is not set+# CONFIG_IRDA is not set+# CONFIG_BT is not set+CONFIG_IEEE80211=m+# CONFIG_IEEE80211_DEBUG is not set+CONFIG_IEEE80211_CRYPT_WEP=m+CONFIG_IEEE80211_CRYPT_CCMP=m+CONFIG_IEEE80211_CRYPT_TKIP=m++#+# Device Drivers+#++#+# Generic Driver Options+#+CONFIG_STANDALONE=y+CONFIG_PREVENT_FIRMWARE_BUILD=y+CONFIG_FW_LOADER=y++#+# Memory Technology Devices (MTD)+#+CONFIG_MTD=y+# CONFIG_MTD_DEBUG is not set+# CONFIG_MTD_CONCAT is not set+CONFIG_MTD_PARTITIONS=y+# CONFIG_MTD_REDBOOT_PARTS is not set+CONFIG_MTD_CMDLINE_PARTS=y+# CONFIG_MTD_AFS_PARTS is not set++#+# User Modules And Translation Layers+#+CONFIG_MTD_CHAR=y+# CONFIG_MTD_BLOCK is not set+CONFIG_MTD_BLOCK_RO=y+# CONFIG_FTL is not set+# CONFIG_NFTL is not set+# CONFIG_INFTL is not set++#+# RAM/ROM/Flash chip drivers+#+# CONFIG_MTD_CFI is not set+# CONFIG_MTD_JEDECPROBE is not set+CONFIG_MTD_MAP_BANK_WIDTH_1=y+CONFIG_MTD_MAP_BANK_WIDTH_2=y+CONFIG_MTD_MAP_BANK_WIDTH_4=y+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set+CONFIG_MTD_CFI_I1=y+CONFIG_MTD_CFI_I2=y+# CONFIG_MTD_CFI_I4 is not set+# CONFIG_MTD_CFI_I8 is not set+# CONFIG_MTD_RAM is not set+# CONFIG_MTD_ROM is not set+# CONFIG_MTD_ABSENT is not set++#+# Mapping drivers for chip access+#+# CONFIG_MTD_COMPLEX_MAPPINGS is not set+# CONFIG_MTD_PLATRAM is not set++#+# Self-contained MTD device drivers+#+# CONFIG_MTD_SLRAM is not set+# CONFIG_MTD_PHRAM is not set+# CONFIG_MTD_MTDRAM is not set+# CONFIG_MTD_BLKMTD is not set+# CONFIG_MTD_BLOCK2MTD is not set++#+# Disk-On-Chip Device Drivers+#+# CONFIG_MTD_DOC2000 is not set+# CONFIG_MTD_DOC2001 is not set+# CONFIG_MTD_DOC2001PLUS is not set+CONFIG_MTD_AT91_DATAFLASH=y+# CONFIG_MTD_AT91_DATAFLASH_CARD is not set++#+# NAND Flash Device Drivers+#+# CONFIG_MTD_NAND is not set++#+# Parallel port support+#+# CONFIG_PARPORT is not set++#+# Plug and Play support+#++#+# Block devices+#+# CONFIG_BLK_DEV_COW_COMMON is not set+CONFIG_BLK_DEV_LOOP=m+# CONFIG_BLK_DEV_CRYPTOLOOP is not set+CONFIG_BLK_DEV_NBD=m+# CONFIG_BLK_DEV_UB is not set+# CONFIG_BLK_DEV_RAM is not set+CONFIG_BLK_DEV_RAM_COUNT=16+# CONFIG_CDROM_PKTCDVD is not set++#+# IO Schedulers+#+CONFIG_IOSCHED_NOOP=y+CONFIG_IOSCHED_AS=y+CONFIG_IOSCHED_DEADLINE=y+CONFIG_IOSCHED_CFQ=y+# CONFIG_ATA_OVER_ETH is not set++#+# ATA/ATAPI/MFM/RLL support+#+# CONFIG_IDE is not set++#+# SCSI device support+#+# CONFIG_RAID_ATTRS is not set+CONFIG_SCSI=m+CONFIG_SCSI_PROC_FS=y++#+# SCSI support type (disk, tape, CD-ROM)+#+CONFIG_BLK_DEV_SD=m+# CONFIG_CHR_DEV_ST is not set+# CONFIG_CHR_DEV_OSST is not set+CONFIG_BLK_DEV_SR=m+CONFIG_BLK_DEV_SR_VENDOR=y+CONFIG_CHR_DEV_SG=m+# CONFIG_CHR_DEV_SCH is not set++#+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs+#+CONFIG_SCSI_MULTI_LUN=y+# CONFIG_SCSI_CONSTANTS is not set+# CONFIG_SCSI_LOGGING is not set++#+# SCSI Transport Attributes+#+# CONFIG_SCSI_SPI_ATTRS is not set+# CONFIG_SCSI_FC_ATTRS is not set+# CONFIG_SCSI_ISCSI_ATTRS is not set+# CONFIG_SCSI_SAS_ATTRS is not set++#+# SCSI low-level drivers+#+# CONFIG_SCSI_SATA is not set+# CONFIG_SCSI_DEBUG is not set++#+# PCMCIA SCSI adapter support+#+# CONFIG_PCMCIA_AHA152X is not set+# CONFIG_PCMCIA_FDOMAIN is not set+# CONFIG_PCMCIA_NINJA_SCSI is not set+# CONFIG_PCMCIA_QLOGIC is not set+# CONFIG_PCMCIA_SYM53C500 is not set++#+# Multi-device support (RAID and LVM)+#+# CONFIG_MD is not set++#+# Fusion MPT device support+#+# CONFIG_FUSION is not set++#+# IEEE 1394 (FireWire) support+#++#+# I2O device support+#++#+# Network device support+#+CONFIG_NETDEVICES=y+CONFIG_DUMMY=m+# CONFIG_BONDING is not set+# CONFIG_EQUALIZER is not set+CONFIG_TUN=m++#+# PHY device support+#+CONFIG_PHYLIB=y+CONFIG_PHYCONTROL=y++#+# MII PHY device drivers+#+# CONFIG_MARVELL_PHY is not set+CONFIG_DAVICOM_PHY=y+# CONFIG_QSEMI_PHY is not set+# CONFIG_LXT_PHY is not set+# CONFIG_CICADA_PHY is not set++#+# Ethernet (10 or 100Mbit)+#+CONFIG_NET_ETHERNET=y+CONFIG_MII=y+CONFIG_ARM_AT91_ETHER=y+# CONFIG_SMC91X is not set+# CONFIG_DM9000 is not set++#+# Ethernet (1000 Mbit)+#++#+# Ethernet (10000 Mbit)+#++#+# Token Ring devices+#++#+# Wireless LAN (non-hamradio)+#+CONFIG_NET_RADIO=y++#+# Obsolete Wireless cards support (pre-802.11)+#+# CONFIG_STRIP is not set+# CONFIG_PCMCIA_WAVELAN is not set+# CONFIG_PCMCIA_NETWAVE is not set++#+# Wireless 802.11 Frequency Hopping cards support+#+# CONFIG_PCMCIA_RAYCS is not set++#+# Wireless 802.11b ISA/PCI cards support+#+# CONFIG_HERMES is not set+# CONFIG_ATMEL is not set++#+# Wireless 802.11b Pcmcia/Cardbus cards support+#+# CONFIG_AIRO_CS is not set+# CONFIG_PCMCIA_WL3501 is not set+# CONFIG_HOSTAP is not set+CONFIG_NET_WIRELESS=y++#+# PCMCIA network device support+#⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -