⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 rsdproto.c

📁 Linux2.4.27在AT91RM9200下的U-BOOT代码。可以在Redhat9等版本下使用。适合ARM学习者使用。
💻 C
字号:
/* * (C) Copyright 2000 * Sysgo Real-Time Solutions, GmbH <www.elinos.com> * Marius Groeger <mgroeger@sysgo.de> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <ioports.h>#include <mpc8260.h>#include <i2c.h>/* define to initialise the SDRAM on the local bus */#undef INIT_LOCAL_BUS_SDRAM/* I2C Bus adresses for PPC & Protocol board */#define PPC8260_I2C_ADR		0x30	/*(0)011.0000 */#define LM84_PPC_I2C_ADR	0x2A	/*(0)010.1010 */#define LM84_SHARC_I2C_ADR	0x29	/*(0)010.1001 */#define VIRTEX_I2C_ADR		0x25	/*(0)010.0101 */#define X24645_PPC_I2C_ADR	0x00	/*(0)00X.XXXX  -> be careful ! No other i2c-chip should have an adress beginning with (0)00 !!! */#define RS5C372_PPC_I2C_ADR	0x32	/*(0)011.0010  -> this adress is programmed by the manufacturer and cannot be changed !!! *//* * I/O Port configuration table * * if conf is 1, then that port pin will be configured at boot time * according to the five values podr/pdir/ppar/psor/pdat for that entry */const iop_conf_t iop_conf_tab[4][32] = {    /* Port A configuration */    {	/*	      conf ppar psor pdir podr pdat */	/* PA31 */ {   0,   0,   0,   0,   0,   0   },	/* PA30 */ {   0,   0,   0,   0,   0,   0   },	/* PA29 */ {   0,   0,   0,   0,   0,   0   },	/* PA28 */ {   0,   0,   0,   0,   0,   0   },	/* PA27 */ {   0,   0,   0,   0,   0,   0   },	/* PA26 */ {   0,   0,   0,   0,   0,   0   },	/* PA25 */ {   0,   0,   0,   0,   0,   0   },	/* PA24 */ {   0,   0,   0,   0,   0,   0   },	/* PA23 */ {   0,   0,   0,   0,   0,   0   },	/* PA22 */ {   0,   0,   0,   0,   0,   0   },	/* PA21 */ {   0,   0,   0,   0,   0,   0   },	/* PA20 */ {   0,   0,   0,   0,   0,   0   },	/* PA19 */ {   0,   0,   0,   0,   0,   0   },	/* PA18 */ {   0,   0,   0,   0,   0,   0   },	/* PA17 */ {   0,   0,   0,   0,   0,   0   },	/* PA16 */ {   0,   0,   0,   0,   0,   0   },	/* PA15 */ {   0,   0,   0,   0,   0,   0   },	/* PA14 */ {   0,   0,   0,   0,   0,   0   },	/* PA13 */ {   0,   0,   0,   0,   0,   0   },	/* PA12 */ {   0,   0,   0,   0,   0,   0   },	/* PA11 */ {   0,   0,   0,   0,   0,   0   },	/* PA10 */ {   0,   0,   0,   0,   0,   0   },	/* PA9  */ {   0,   0,   0,   0,   0,   0   },	/* PA8  */ {   0,   0,   0,   0,   0,   0   },	/* PA7  */ {   0,   0,   0,   0,   0,   0   },	/* PA6  */ {   0,   0,   0,   0,   0,   0   },	/* PA5  */ {   0,   0,   0,   0,   0,   0   },	/* PA4  */ {   0,   0,   0,   0,   0,   0   },	/* PA3  */ {   0,   0,   0,   0,   0,   0   },	/* PA2  */ {   0,   0,   0,   0,   0,   0   },	/* PA1  */ {   0,   0,   0,   0,   0,   0   },	/* PA0  */ {   0,   0,   0,   0,   0,   0   }    },    {   /*	      conf ppar psor pdir podr pdat */	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */	/* PB17 */ {   0,   0,   0,   0,   0,   0   },	/* PB16 */ {   0,   0,   0,   0,   0,   0   },	/* PB15 */ {   0,   0,   0,   0,   0,   0   },	/* PB14 */ {   0,   0,   0,   0,   0,   0   },	/* PB13 */ {   0,   0,   0,   0,   0,   0   },	/* PB12 */ {   0,   0,   0,   0,   0,   0   },	/* PB11 */ {   0,   0,   0,   0,   0,   0   },	/* PB10 */ {   0,   0,   0,   0,   0,   0   },	/* PB9  */ {   0,   0,   0,   0,   0,   0   },	/* PB8  */ {   0,   0,   0,   0,   0,   0   },	/* PB7  */ {   0,   0,   0,   0,   0,   0   },	/* PB6  */ {   0,   0,   0,   0,   0,   0   },	/* PB5  */ {   0,   0,   0,   0,   0,   0   },	/* PB4  */ {   0,   0,   0,   0,   0,   0   },	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */    },    {   /*	      conf ppar psor pdir podr pdat */	/* PC31 */ {   0,   0,   0,   0,   0,   0   },	/* PC30 */ {   0,   0,   0,   0,   0,   0   },	/* PC29 */ {   0,   0,   0,   0,   0,   0   },	/* PC28 */ {   0,   0,   0,   0,   0,   0   },	/* PC27 */ {   0,   0,   0,   0,   0,   0   },	/* PC26 */ {   0,   0,   0,   0,   0,   0   },	/* PC25 */ {   0,   0,   0,   0,   0,   0   },	/* PC24 */ {   0,   0,   0,   0,   0,   0   },	/* PC23 */ {   0,   0,   0,   0,   0,   0   },	/* PC22 */ {   0,   0,   0,   0,   0,   0   },	/* PC21 */ {   0,   0,   0,   0,   0,   0   },	/* PC20 */ {   0,   0,   0,   0,   0,   0   },	/* PC19 */ {   1,   1,   0,   0,   0,   0   },	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* ETHRXCLK: CLK14 */	/* PC17 */ {   0,   0,   0,   0,   0,   0   }, /* ETHTXCLK: CLK15 */	/* PC16 */ {   0,   0,   0,   0,   0,   0   },	/* PC15 */ {   0,   0,   0,   0,   0,   0   },	/* PC14 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART CD/ */	/* PC13 */ {   0,   0,   0,   0,   0,   0   },	/* PC12 */ {   0,   0,   0,   0,   0,   0   },	/* PC11 */ {   0,   0,   0,   0,   0,   0   },	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* ETHMDC: GP */	/* PC9  */ {   1,   0,   0,   1,   0,   0   }, /* ETHMDIO: GP */	/* PC8  */ {   0,   0,   0,   0,   0,   0   },	/* PC7  */ {   0,   0,   0,   0,   0,   0   },	/* PC6  */ {   0,   0,   0,   0,   0,   0   },	/* PC5  */ {   0,   0,   0,   0,   0,   0   },	/* PC4  */ {   0,   0,   0,   0,   0,   0   },	/* PC3  */ {   0,   0,   0,   0,   0,   0   },	/* PC2  */ {   0,   0,   0,   0,   0,   0   },	/* PC1  */ {   0,   0,   0,   0,   0,   0   },	/* PC0  */ {   0,   0,   0,   0,   0,   0   }    },    {   /*	      conf ppar psor pdir podr pdat */	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 UART RxD */	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 UART TxD */	/* PD29 */ {   0,   0,   0,   0,   0,   0   },	/* PD28 */ {   0,   0,   0,   0,   0,   0   },	/* PD27 */ {   0,   0,   0,   0,   0,   0   },	/* PD26 */ {   0,   0,   0,   0,   0,   0   },	/* PD25 */ {   0,   0,   0,   0,   0,   0   },	/* PD24 */ {   0,   0,   0,   0,   0,   0   },	/* PD23 */ {   0,   0,   0,   0,   0,   0   },	/* PD22 */ {   0,   0,   0,   0,   0,   0   },	/* PD21 */ {   0,   0,   0,   0,   0,   0   },	/* PD20 */ {   0,   0,   0,   0,   0,   0   },	/* PD19 */ {   0,   0,   0,   0,   0,   0   },	/* PD18 */ {   0,   0,   0,   0,   0,   0   },	/* PD17 */ {   0,   0,   0,   0,   0,   0   },	/* PD16 */ {   0,   0,   0,   0,   0,   0   },	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */	/* PD13 */ {   0,   0,   0,   0,   0,   0   },	/* PD12 */ {   0,   0,   0,   0,   0,   0   },	/* PD11 */ {   0,   0,   0,   0,   0,   0   },	/* PD10 */ {   0,   0,   0,   0,   0,   0   },	/* PD9  */ {   0,   0,   0,   0,   0,   0   },	/* PD8  */ {   0,   0,   0,   0,   0,   0   },	/* PD7  */ {   0,   0,   0,   0,   0,   0   },	/* PD6  */ {   0,   0,   0,   0,   0,   0   },	/* PD5  */ {   0,   0,   0,   0,   0,   0   },	/* PD4  */ {   0,   0,   0,   0,   0,   0   },	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */    }};/* ------------------------------------------------------------------------- */struct tm {	unsigned int tm_sec;	unsigned int tm_min;	unsigned int tm_hour;	unsigned int tm_wday;	unsigned int tm_mday;	unsigned int tm_mon;	unsigned int tm_year;};void read_RS5C372_time (struct tm *timedate){	unsigned char buffer[8];#define BCD_TO_BIN(val) ((val)=((val)&15) + ((val)>>4)*10)	if (i2c_read (RS5C372_PPC_I2C_ADR, 0, 1, buffer, sizeof (buffer))) {		timedate->tm_sec = BCD_TO_BIN (buffer[0]);		timedate->tm_min = BCD_TO_BIN (buffer[1]);		timedate->tm_hour = BCD_TO_BIN (buffer[2]);		timedate->tm_wday = BCD_TO_BIN (buffer[3]);		timedate->tm_mday = BCD_TO_BIN (buffer[4]);		timedate->tm_mon = BCD_TO_BIN (buffer[5]);		timedate->tm_year = BCD_TO_BIN (buffer[6]) + 2000;	} else {		/*printf("i2c error %02x\n", rc); */		memset (timedate, 0, sizeof (struct tm));	}}/* ------------------------------------------------------------------------- */int read_LM84_temp (int address){	unsigned char buffer[8];	/*int rc;*/	if (i2c_read (address, 0, 1, buffer, 1)) {		return (int) buffer[0];	} else {		/*printf("i2c error %02x\n", rc); */		return -42;	}}/* ------------------------------------------------------------------------- *//* * Check Board Identity: */int checkboard (void){	struct tm timedate;	unsigned int ppctemp, prottemp;	puts ("Board: Rohde & Schwarz 8260 Protocol Board\n");	/* initialise i2c */	i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE);	read_RS5C372_time (&timedate);	printf ("  Time:  %02d:%02d:%02d\n",			timedate.tm_hour, timedate.tm_min, timedate.tm_sec);	printf ("  Date:  %02d-%02d-%04d\n",			timedate.tm_mday, timedate.tm_mon, timedate.tm_year);	ppctemp = read_LM84_temp (LM84_PPC_I2C_ADR);	prottemp = read_LM84_temp (LM84_SHARC_I2C_ADR);	printf ("  Temp:  PPC %d C, Protocol Board %d C\n",			ppctemp, prottemp);	return 0;}/* ------------------------------------------------------------------------- *//* * Miscelaneous platform dependent initialisations while still * running in flash */int misc_init_f (void){	return 0;}/* ------------------------------------------------------------------------- */long int initdram (int board_type){	volatile immap_t *immap = (immap_t *) CFG_IMMR;	volatile memctl8260_t *memctl = &immap->im_memctl;#ifdef INIT_LOCAL_BUS_SDRAM	volatile uchar *ramaddr8;#endif	volatile ulong *ramaddr32;	ulong sdmr;	int i;	/*	 * Only initialize SDRAM when running from FLASH.	 * When running from RAM, don't touch it.	 */	if ((ulong) initdram & 0xff000000) {		immap->im_siu_conf.sc_ppc_acr = 0x02;		immap->im_siu_conf.sc_ppc_alrh = 0x01267893;		immap->im_siu_conf.sc_ppc_alrl = 0x89ABCDEF;		immap->im_siu_conf.sc_lcl_acr = 0x02;		immap->im_siu_conf.sc_lcl_alrh = 0x01234567;		immap->im_siu_conf.sc_lcl_alrl = 0x89ABCDEF;		/*		 * Program local/60x bus Transfer Error Status and Control Regs:		 * Disable parity errors		 */		immap->im_siu_conf.sc_tescr1 = 0x00040000;		immap->im_siu_conf.sc_ltescr1 = 0x00040000;		/*		 * Perform Power-Up Initialisation of SDRAM (see 8260 UM, 10.4.2)		 *		 * The appropriate BRx/ORx registers have already		 * been set when we get here (see cpu_init_f). The		 * SDRAM can be accessed at the address CFG_SDRAM_BASE.		 */		memctl->memc_mptpr = 0x2000;		memctl->memc_mar = 0x0200;#ifdef INIT_LOCAL_BUS_SDRAM		/* initialise local bus ram		 *		 * (using the PSRMR_ definitions is NOT an error here		 * - the LSDMR has the same fields as the PSDMR!)		 */		memctl->memc_lsrt = 0x0b;		memctl->memc_lurt = 0x00;		ramaddr = (uchar *) PHYS_SDRAM_LOCAL;		sdmr = CFG_LSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);		memctl->memc_lsdmr = sdmr | PSDMR_OP_PREA;		*ramaddr = 0xff;		for (i = 0; i < 8; i++) {			memctl->memc_lsdmr = sdmr | PSDMR_OP_CBRR;			*ramaddr = 0xff;		}		memctl->memc_lsdmr = sdmr | PSDMR_OP_MRW;		*ramaddr = 0xff;		memctl->memc_lsdmr = CFG_LSDMR | PSDMR_OP_NORM;#endif		/* initialise 60x bus ram */		memctl->memc_psrt = 0x0b;		memctl->memc_purt = 0x08;		ramaddr32 = (ulong *) PHYS_SDRAM_60X;		sdmr = CFG_PSDMR & ~(PSDMR_OP_MSK | PSDMR_RFEN | PSDMR_PBI);		memctl->memc_psdmr = sdmr | PSDMR_OP_PREA;		ramaddr32[0] = 0x00ff00ff;		ramaddr32[1] = 0x00ff00ff;		memctl->memc_psdmr = sdmr | PSDMR_OP_CBRR;		for (i = 0; i < 8; i++) {			ramaddr32[0] = 0x00ff00ff;			ramaddr32[1] = 0x00ff00ff;		}		memctl->memc_psdmr = sdmr | PSDMR_OP_MRW;		ramaddr32[0] = 0x00ff00ff;		ramaddr32[1] = 0x00ff00ff;		memctl->memc_psdmr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;	}	/* return the size of the 60x bus ram */	return PHYS_SDRAM_60X_SIZE;}/* ------------------------------------------------------------------------- *//* * Miscelaneous platform dependent initialisations after monitor * has been relocated into ram */int misc_init_r (void){	printf ("misc_init_r\n");	return (0);}

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -